Note - TP-Link TL-WA5110G Manual

Note - TP-Link TL-WA5110G Manual

1
Note
Note
Please use only wired network connections to configure the AP.
The power adapter can be directly connected to the AP too. In this way
you can connect your computer directly to the AP with an Ethernet cable.
Turn off all your network devices,
including your computer(s), power
injector and the AP.
Connect your computer to the
LAN port on the power injector
with an Ethernet cable.
Plug the provided power adapter
into the DC jack on the power
injector, and the other end to a
standard electrical wall socket.
Connect your AP to the PoE port
on the power injector with an
Ethernet cable.