HCE-C1100 HDR Rearview Camera

Product Information:

The product is the Alpine Rearview Camera, model HCE-C1D. It is
manufactured by Alpine Electronics, a company based in Japan. The
camera is designed to be mounted on the rear bumper of a vehicle
and provides a clear view of the rear surroundings. The camera is
compatible with Alpine Mobile Media Stations that have a dedicated
Alpine camera input. For more information on compatible products,
customers can contact their local authorized Alpine dealer or visit
the Alpine website.

Product Usage Instructions:

  1. Attach the mounting bracket to the camera mounting stage using
    the angle adjustment screw as shown in Figure
    1
    .
  2. Attach the camera to the camera mounting bracket C. Pull the
    camera cable through to the camera mounting bracket C and secure it
    with the hex screws. Refer to Figure 2 for
    guidance.
  3. Loosen the camera mounting bracket C and angle adjustment
    screw. Determine the desired attachment angle and carefully tighten
    the angle adjustment screw.
  4. Make a 13 mm hole in the rear bumper camera mounting bracket as
    depicted in Figure 3.
  5. Pull the camera cable inside the car through the hole made in
    step 4.
  6. Peel off the adhesive seal from the camera mounting bracket and
    attach it on the chassis of the vehicle. If necessary, use
    self-tapping screws to secure the camera mounting bracket.
  7. When adjusting the camera angle, make sure to turn off the
    engine and apply the hand brake to avoid accidents.
  8. Put the gear shift into reverse (R) and check the camera image
    on the display.
  9. Loosen the camera mounting bracket C and angle adjustment
    screw. Determine the desired camera angle and carefully tighten the
    angle adjustment screw.
  10. Secure the camera cable using the waterproof pad # and the
    waterproof pad adhesive sheet $. Use the wire clamp J to secure any
    slack cable around the waterproof pad #. Refer to Figure
    9
    for reference.

FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE/PARA USO EN AUTOMÓVILES/ SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/

R
)%3Rearview Camera
HCE-C HCE-C1D

· OWNER’S MANUAL

Please read before using this equipment.

· MODE D’EMPLOI

Veuillez lire avant d’utiliser cet appareil.

· MANUAL DE OPERACIÓN

Léalo antes de utilizar este equipo.

· BEDIENUNGSANLEITUNG

Bitte diese Bedienungsanleitung vor Montage und Gebrauch

des Geräts genau durchlesen.

· ISTRUZIONI PER L’USO

Si prega di leggere prima di utilizzare l’attrezzatura.

· ANVÄNDARHANDLEDNING

Innan du använder utrustningen bör du läsa igenom denna

användarhandledning.

·

,

.

HCE-C1

HCE-C1D

5

5

ALPINE ELECTRONICS MARKETING, INC. 1-7, Yukigaya-Otsukamachi, Ota-ku, Tokyo 145-0067, JAPAN Phone: 03-5499-4531
ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 161-165 Princes Highway, Hallam Victoria 3803, Australia Phone 03-8787-1200

ALPINE ELECTRONICS GmbH Wilhelm-Wagenfeld-Str. 1-3, 80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD. Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K. www.alpine.co.uk
ALPINE ELECTRONICS France S.A.R.L. 184 allée des Erables CS 52016 ­ Villepinte
95 945 Roissy CDG cedex FRANCE
Phone : + 33(0)1 48 63 89 89

ALPINE ITALIA S.p.A. Viale Cristoforo Colombo 8, 20090 Trezzano sul Naviglio MI, Italy
Phone +39 02 484781
ALPINE ELECTRONICS DE ESPAÑA, S.A. Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain Phone 945-283588

Designed by ALPINE &VSPQF Printed in ,PSFB .,

Installation/Installation/Instalación/Montage/Montaggio/Montering/

Check Accessory Parts/Vérifiez les accessoires/Compruebe los accesorios/Überprüfen Sie, ob alle Teile mitgelifert wurden/Verificare le componenti accessorie/Kontrollera medföljande delar/

HCE-C1

A Rearview camera A Caméra de recul A Cámara de marcha atrás A Rückfahrkamera A Telecamera posteriore A Backkamera A

B Power unit B Alimentation B Unidad de alimentación B Netzteil B Alimentatore B Strömenhet B

C Camera mounting C Support de fixation C Soporte de la cámara C Kamerahalterung C Supporto telecamera C Kamerafäste C

D Camera mounting stage D Palier de montage de la caméra D Plataforma de montaje de la cámara D Kamerahalterungsplattform D Supporto di montaggio della
telecamera D Kamerans monteringsstadiet D

(0.5m)
N

Reverse/ACC/Video/GND : 3m Reverse/ACC/Video/GND : 3m Marcha atrás/ACC/Video/TIERRA: 3m Rückfahrk./ACC/Video/Masse: 3m Reverse/ACC/Video/GND: 3m Back/ACC/Video/GND: 3m Reverse/ACC/Video/GND: 3m

E Camera mounting screws E Vis de montage de la caméra E Tornillos de montaje de la cámara E Kamera-Montageschrauben E Viti di montaggio della
telecamera
E Kamerans monteringsskruvar E

F Self-tapping screw F Vis autotaraudeuse F Tornillo macho roscador F Schneidschraube F Vite autofilettante F Gängpressad skruv F

G Waterproofing pad G Protège câble étanche G Dispositivo protector resistente
al agua G Wasserdichtes Pad G Protezione impermeabile G Vattentätningsdyna G

H Waterproofing pad adhesive sheet H Adhésif pour protège câble
étanche H Hoja adhesiva para el dispositivo
protector resistente al agua H Klebestreifen für wasserdichtes
Pad H Foglio adesivo protezione
impermeabile H Självhäftande ark för
vattentätningsdyna H

(4 screws)/(4 vis)/(4 tornillos)/(4 Schrauben)/(4 viti)/(4 skruvar)/(4 ) (2 screws for mounting camera, 2 angle adjustment screws)/ (2 vis pour le montage de la caméra, 2 vis pour le réglage d’angle)/ (2 tornillos para montar la cámara, 2 tornillos de ajuste de ángulo)/ (2 Schrauben für die Monatge der Kamera, 2 Winkeleinstellungsschrauben)/ (2 viti per il montaggio della telecamera, 2 viti di regolazione dell’angolazione)/ (2 screws for mounting camera, 2 angle adjustment screws) – (2 skruvar för montering av kamera, 2 vinkeljusteringsskruvar)/ (2 , 2 )
I Camera extension cable I Rallonge câble camera I Cable de extensión de la cámera I Kameraverlängerungskabel I Cavo di prolunga per la
telecamera I Kameraförlängningskabel I

(4 screws)/(4 vis)/(4 tornillos)/ (4 Schrauben)/(4 viti)/(4 skruvar)/ (4 )
J Cable tie J Serre-câble J Brida para cable J Kabelbinder J Fascetta serracavi J Fastbindningsrem J

K Heat-shrink Tube K Tube thermorétrécissable K Tubo termorretráctil K Heißschrumpfschlauch K Tubo termorestringente K Värmekrympande rör K

(7 m)

(5 QDT)/(5 QDT)/(5 QJF[BT)/(5 4UL)/(5 Q[)/ (5 sU)/(5 )

HCE-CD
A Rearview camera A Caméra de recul A Cámara de marcha atrás A Rückfahrkamera A Telecamera posteriore A Backkamera A

C Camera mounting C Support de fixation C Soporte de la cámara C Kamerahalterung C Supporto telecamera C Kamerafäste C

D Camera mounting stage D Palier de montage de la caméra D Plataforma de montaje de la cámara D Kamerahalterungsplattform D Supporto di montaggio della
telecamera D Kamerans monteringsstadiet D

E Camera mounting screws E Vis de montage de la caméra E Tornillos de montaje de la cámara E Kamera-Montageschrauben E Viti di montaggio della
telecamera E Kamerans monteringsskruvar E

(0.5m)
N

F Self-tapping screw F Vis autotaraudeuse F Tornillo macho roscador F Schneidschraube F Vite autofilettante F Gängpressad skruv F

G Waterproofing pad G Protège câble étanche G Dispositivo protector resistente
al agua G Wasserdichtes Pad G Protezione impermeabile G Vattentätningsdyna G

H Waterproofing pad adhesive sheet H Adhésif pour protège câble
étanche H Hoja adhesiva para el dispositivo
protector resistente al agua H Klebestreifen für wasserdichtes
Pad H Foglio adesivo protezione
impermeabile H Självhäftande ark för
vattentätningsdyna H

(4 screws)/(4 vis)/(4 tornillos)/(4 Schrauben)/(4 viti)/(4 skruvar)/(4 ) (2 screws for mounting camera, 2 angle adjustment screws)/ (2 vis pour le montage de la caméra, 2 vis pour le réglage d’angle)/ (2 tornillos para montar la cámara, 2 tornillos de ajuste de ángulo)/ (2 Schrauben für die Monatge der Kamera, 2 Winkeleinstellungsschrauben)/ (2 viti per il montaggio della telecamera, 2 viti di regolazione dell’angolazione)/ (2 screws for mounting camera, 2 angle adjustment screws) – (2 skruvar för montering av kamera, 2 vinkeljusteringsskruvar)/ (2 , 2 )
I Camera extension cable I Rallonge câble camera I Cable de extensión de la cámera I Kameraverlängerungskabel I Cavo di prolunga per la
telecamera I Kameraförlängningskabel I

(4 screws)/(4 vis)/(4 tornillos)/ (4 Schrauben)/(4 viti)/(4 skruvar)/ (4 )
J Cable tie J Serre-câble J Brida para cable J Kabelbinder J Fascetta serracavi J Fastbindningsrem J

K Heat-shrink Tube K Tube thermorétrécissable K Tubo termorretráctil K Heißschrumpfschlauch K Tubo termorestringente K Värmekrympande rör K

(10.5m)/(10,5m)

QDT
QDT
QJF[BT
4UL
Q[
TU

Installation Location/Emplacement de l’installation/Ubicación de la instalación/ Montageort/Posizione di montaggio/ Monteringsplats/
Install to the Rear Garnish/Installez la caméra sur la carrosserie arrière/ Instalación en el acabado trasero/Montage am Heckklappengriff/ Montaggio sulla modanatura posteriore/Montering i bakluckan/
2.5 13

30

21

Fig.1/Schéma 1/Fig.1/

Fig.2/Schéma 2/Fig.2/

Fig.3/Schéma 3/Fig.3/

Abb. 1/Fig.1/Bild 1/. 1 Abb. 2/Fig.2/Bild 2/. 2 Abb. 3/Fig.3/Bild 3/. 3

English
1 Attach the mounting bracket to the camera mounting stage with the angle adjustment screw as shown in the figure.
2 Attach the camera to the camera mounting bracket C. Pull the camera cable through to the camera mounting bracket C, and secure with the hex screws ! (see Fig. 2).
3 Loosen the camera mounting bracket C and angle adjustment screw. Determine the attachment angle, and carefully tighten the angle adjustment screw.
4 Make a 13 mm hole in the rear bumper camera mounting bracket (see Fig. 3).
5 Pull the camera cable inside the car through the hole made in step 3.
6 Peel off the adhesive seal from the camera mounting bracket and attach the camera mounting bracket on the chassis of the vehicle. If required, fix the camera mounting bracket using self-tapping screws.
· Attach the camera in a position where it does not touch the number plate.
· Use retail touch-up paint to paint the surface and surrounding area when a hole has been made in a metal surface.
· Waterproof securely the hole made for the camera cable using a commercially-available waterproof tape or sealing material.
· If necessary, use a self-tapping screw ” to fix the camera mounting bracket (In the case of a plastic mount area).

HCE-C1D
HCE-C1D-compatible Alpine AV Head Unit*/Unité principale AV Alpine compatible avec HCE-C1D*/Unidad principal AV Alpine compatible con el HCE-C1D*/HCE-C1D-kompatibles Alpine AVHauptgerät*/Unità principale AV Alpine compatibile con HCE-C1D*/HCE-C1D-kompatibel Alpine AV huvudenhet*/ – Alpine, HCE-C1D*
Camera extension cable (supplied)/ Rallonge câble camera (fournie)/ Cable de extensión de la cámera (suministrada)/ Kameraverlängerungskabel (mitgeliefert)/ Cavo di prolunga per la telecamera (in dotazione)/ Kameraförlängningskabel (medföljer)/ ( )
Rearview camera/Caméra de recul/ Cámara de marcha atrás/ Rückfahrkamera/Telecamera posteriore/ Backkamera/
Fig.4/Schéma 4/Fig.4/Abb. 4/Fig.4/Bild 4/. 4
English
· For details on connection, refer to the installation manual of the HCE-C1D-compatible product. Connect the rear camera input connector only.
* This product can only connect to Alpine Mobile Media Stations with the dedicated Alpine camera input. For information on HCE-C1D-compatible products, contact your local authorized Alpine dealer or visit the Alpine Website.

Adjusting the Camera Angle/Réglage de l’angle de la caméra/Ajuste del ángulo de la cámara/Anpassen des Kamerawinkels/Regolazione dell’angolazione della telecamera/Justering av kameravinkeln/
Fig.6/Schéma 6/Fig.6/ Abb. 6/Fig.6/Bild 6/. 6

Fig.7/Schéma 7/Fig.7/ Abb. 7/Fig.7/Bild 7/. 7

Fig.8/Schéma 8/Fig.8/ Abb. 8/Fig.8/Bild 8/. 8
English

Caution
When adjusting the camera angle, do so after turning off the engine and applying the hand brake to avoid an accident.
1 Put the gear shift into reverse (R), and check the image from the camera on the display.
2 Loosen the camera mounting bracket C and angle adjustment screw. Determine the camera angle, and carefully tighten the angle adjustment screw.

Securing the Camera Cable/Fixation du câble de la caméra/Fijación del cable de la cámara/Befestigen des Kamerakabels/Fissaggio del cavo della telecamera/Infästning av kamerakabeln/
A
B CD
(A) Rearview camera/Caméra arrière/Cámera trasera/Rückfahrkamera/ Telecamera per retromarcia/Backkamera/
(B) To Power unit/Vers le bloc d’alimentation/A la unidad de alimentación/An Netzteil/All’unità di alimentazione/Till strömförsörjningsenheten/
(C) Clamper/Attache-fils/Fijador/Klammer/Elemento di fissaggio/Klämma/
(D) Waterproofing pad/Protège-câbles imperméable/Dispositivo protector resistente al agua/Wasserdichtes Polster/Protezione impermeabile/ Vattentätningsdyna/
Fig.9/Schéma 9/Fig.9/Abb. 9/Fig.9/Bild 9/. 9 English
1 Secure the camera cable while referring to Fig. 9. Attach the waterproof pad # with the waterproof pad adhesive sheet $, and secure any slack cable around the waterproof pad # using the wire clamp J.
· Ensure the cable does not get caught in the trunk, rear door(s) or any hinges.
· The cable should go on the outside of car hinges and harness covers.
· After completing wiring, open and close the trunk and the rear doors several times to confirm the cable is not getting caught or rubbing anywhere.

Specifications/Spécifications/Especificaciones/Technische Daten/ Caratteristiche techniche/Tekniska data/
HCE-C1
English

Power Requirements

DC9V to DC15.6V

Ground Type

Negative ground type

Power Consumption

W (12V)

Output Image*1

Composite Video NTSC

Output Drive Capacity

1Vp-p (75 )

Image Sensor

1/3.7 inch CMOS image sensor, aspect ratio 4:3

Effective Number of Pixels

640 (horizontal)×480 (vertical) approximately 0.3 Mega pixels

Lens Section

Focal length f=1.34mm, brightness F=1:2.

Angle of Field

Horizontal: 131°, vertical: 103°

Automatic Image Adjusting Function

Automatic white balance adjustment

Water Resistance

*1

S/N ratio

4db or more

Resolution (Horizontal)

330 TV lines (center area)

Illumination Range

Approximately 1.5 to 100klx

Operating Temperature Range

Camera Section -22 to +158F (-30 to +70°C) Power Section -22 to +158F (-30 to +70°C)

External dimensions (W×H×D)

Camera Section 23.6×23.6×24.0mm (excluding projection on the rear) Power Section 38.0×25.0×15.0mm (excluding projection)

Weight

Camera Section 27g (camera only) Power Section 83g (including cord)

*1 This product outputs NTSC image. It does not output PAL image.

R
LIMITED WARRANTY
“-1*/&&-&$530/*$40′”.&3*$”
*/$ “MQJOF

JTEFEJDBUFEUPRVBMJUZDSBGUTNBOTIJQBOEJTQMFBTFEUPPGGFSUIJT8BSSBOUZ8FTVHHFTUUIBUZPVSFBEJUUIPSPVHIMZ4IPVMEZPVIBWF BOZRVFTUJPOT
QMFBTFDPOUBDUZPVS%FBMFSPSDPOUBDU”MQJOFBUPOFPGUIFUFMFQIPOFOVNCFSTMJTUFECFMPX

PRODUCTS COVERED:
This Warranty covers Car Audio Products and Related Accessories (“the product”). Products purchased in the Canada are covered only in the Canada. Products purchased in the U.S.A. are covered only in the U.S.A.
LENGTH OF WARRANTY:
This Warranty is in effect for one year from the date of the first consumer purchase.
WHO IS COVERED:
This Warranty only covers the original purchaser of the product, who must reside in the United States, Puerto Rico or Canada.
WHAT IS COVERED:
This Warranty covers defects in materials or workmanship (parts and labor) in the product.
WHAT IS NOT COVERED:
This Warranty does not cover the following:
A Damage occurring during shipment of the product to Alpine for repair (claims must be presented to the carrier).
B Damage caused by accident or abuse, including burned voice coils caused by over-driving the speaker (amplifier level is turned up and driven into distortion or clipping). Speaker mechanical failure (e.g. punctures, tears or rips). Cracked or damaged LCD panels. Dropped or damaged hard drives.
C Damage caused by negligence, misuse, improper operation or failure to follow instructions contained in the Owner’s manual.
D Damage caused by act of God, including without limitation, earthquake, fire, flood, storms or other acts of nature. Any cost or expense related to the removal or reinstallation of the product.
E Service performed by an unauthorized person, company or association. F Any product which has the serial number defaced, altered or removed. G Any product which has been adjusted, altered or modified without Alpine’s consent. H Any product not distributed by Alpine within the United States, Puerto Rico or Canada. I Any product not purchased from an Authorized Alpine Dealer.
HOW TO OBTAIN WARRANTY SERVICE:
A You are responsible for delivery of the product to an Authorized Alpine Service Center or Alpine for repair and for payment of any initial shipping charges. Alpine will, at its option, repair or replace the product with a new or reconditioned product without charge. If the repairs are covered by the warranty, and if the product was shipped to an Authorized Alpine Service Center or Alpine, Alpine will pay the return shipping charges.
B You should provide a detailed description of the problem(s) for which service is required. C You must supply proof of your purchase of the product. D You must package the product securely to avoid damage during shipment. To prevent lost packages it is
recommended to use a carrier that provides a tracking service.

HOW WE LIMIT IMPLIED WARRANTIES:
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE AND MERCHANTABILITY ARE LIMITED IN DURATION TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE AND NO PERSON IS AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT.
HOW WE EXCLUDE CERTAIN DAMAGES:
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY THE PRODUCT. THE TERM “INCIDENTAL DAMAGES” REFERS TO EXPENSES OF TRANSPORTING THE PRODUCT TO THE ALPINE SERVICE CENTER, LOSS OF THE ORIGINAL PURCHASER’S TIME, LOSS OF THE USE OF THE PRODUCT, BUS FARES, CAR RENTALS OR OTHERS COSTS RELATING TO THE CARE AND CUSTODY OF THE PRODUCT. THE TERM “CONSEQUENTIAL DAMAGES” REFERS TO THE COST OF REPAIRING OR REPLACING OTHER PROPERTY WHICH IS DAMAGED WHEN THIS PRODUCT DOES NOT WORK PROPERLY. THE REMEDIES PROVIDED UNDER THIS WARRANTY ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.
HOW STATE/PROVINCIAL LAW RELATES TO THE WARRANTY:
This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state and province to province. In addition, some states/provinces do not allow limitations on how long an implied warranty lasts, and some do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, limitations as to these matters contained herein may not apply to you.
IN CANADA ONLY:
This Warranty is not valid unless your Alpine car audio product has been installed in your vehicle by an Authorized Installation Center, and this warranty stamped upon installation by the installation center.
HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following number for your nearest Authorized Alpine Service Center.
CUSTOMER SERVICE 1-800-421-2284, ext. 860307
TECH SUPPORT1- 800-TECH-101 (1-800-832-4101)
Or visit our website at; http://www.alpine-usa.com

ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A. Do not send products to these addresses. Call the toll free telephone number or visit the website to locate a service center.

Documents / Resources

ALPINE HCE-C1100 HDR Rearview Camera [pdf] Owner's Manual
HCE-C1100, HCE-C1100D, HCE-C1100 HDR Rearview Camera, HCE-C1100, HDR Rearview Camera, Rearview Camera, Camera

References

Leave a comment

Your email address will not be published. Required fields are marked *