PLEASE REGISTER YOUR NEW PRODUCT
RX2500T ORYX Tri Station Rope Machine
To register your product online please go to: www.ropeflex.com/warranty-and-registration
Product serial number is located on equipment or is shown in the box below
SERIAL NUMBER
If serial number is not sown please check equipment
WARNING DECAL PLACEMENT
The decals shown here have been placed on the equipment in indicated locations. If any of the decals are missing or illegible, call us tollfree at 650.549.5888, Monday through Friday, 9 a.m. until 5 p.m. Pacific Time, to order replacement decals. Apply replacement decals in the locations shown.
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precautions before using this equipment.
- Read all instructions in this manual and assemble as described before using this equipment.
- It is the responsibility of the owner to ensure that all users of this equipment are adequately informed of all precautions.
- Use this equipment only on a level surface. Cover the floor beneath to protect the surface.
- Keep children under 12 and pets away from the equipment at all times.
- Make sure all parts are properly tightened each time you use this machine. Replace any worn parts immediately.
- Make sure the adjustment knobs are fully engaged / disengaged before using the equipment.
- Always wear athletic shoes for foot protection while exercising.
- This equipment is designed to support a maximum user weight of 300 pounds.
- Pull on one the rope only and never grab a rope in a way that prevents the drum from rotating. Never attempt to hang on the rope. Pull rope with hands only.
- If you feel pain or dizziness at any time while exercising, stop immediately and begin cooling down.
WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre- existing health problems. Read all instructions before using. ROPEFLEX assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
Contents / Parts List
| ITEM | QUANTITY | DESCRIPTION |
| 1 | 3 | RX2500 Drum with Rope |
| 2 | 3 | RX2500T Main Mast |
| 3 | 3 | RX2500T Base |
| 4 | 1 | RX2500T Base Plate |
| 5 | 3 | RX2500 Seat |
| 6 | 3 | RX2500 Seat stand |
| 7 | 3 | Adjustable Pulley Assembly |
| 8 | 18 | Sodwt Head Screw 5/16″-18 x 1 ‘1/2″ |
| 9 | 42 | Socket Head Screw 5/16″-18 x 1″ |
| 10 | 12 | Socket Head Screw 5/16″-18 x 5/8″ |
| 11 | 12 | Nut 5/16 |
| 12 | 78 | Washer 5/16″ |
| 13 | 3 | Mast Stiffening Plate |
| 14 | 3 | Binding Mid Bracket |
| 15 | 6 | Socket Screw 3/8″-16 x %” |
| 16 | 3 | Display bracket |
| 17 | 3 | LCD Display |
| 18 | 3 | LCD Display screw |
Tools Required for Assembly
- 3/16 or 1/4 Hex Key for 5/16” Button
- 5/16 Hex Key for 3/8” Socket Head Screws
- Philips #2 Screw Driver
- 9/16 Hex Socket Ratchet Wrench
Product Assembly
STEP 1 (Standard RX2500 Configuration)
Parts:
- RX2500 Seat stand
- RX2500 Seat
Hardware:
- Socket Head Screw 5/16” x 1”
- Washer 5/16”
Tools:
- 1/4 Hex Key for 5/16” Button Head Screws
1-1 Attach RX2500 Seat support plate to RX2500 Seat stand.
1-2 Install and completely tighten hardware (use screw only).
1-3 Attach item from step 1-2 to ORYX Seat (Box 2).
1-4 Install and completely tighten hardware (use screw & washer).
STEP 2
Parts:
- 3x RX2500T Main Mast
- 3x RX2500T Base
- 1x RX2500T Base Plate
- 3x RX2500 Seat Assembly
Hardware:
- 18x Socket Head Screw 5/16” x 1 ½”
- 12x Socket Head Screw 5/16” x 1 ½”
- Washer 5/16”
Tools:
- 1/4 Hex Key for 5/16” Button Head Screws
2-1 Attach 3X RX2500T Main Mast and Base Plate to 3X RX2500T Base as shown and completely tighten hardware (use screws and washers).
2-2 Attach 3X RX2500 Seat Assembly to 3X RX2500T Base as shown and completely tighten hardware (use screws and washers).
STEP 3
Parts:
- 3x RX2500T Main Mast or Assembly from STEP 2
- 3x RX2500 Rope Drum
Hardware:
• 18x Socket Head Screw 5/16” x 1”
• 18x Washer 5/16”
Tools:
- 1/4 Hex Key for 5/16” Button Head Screws
3-1 Tilt assembly from STEP 2 and lay it down as shown.
3-2 Attach RX2500 Rope Drum to assembly from STEP 2 and completely tighten hardware on both sides (use screws and washers).
3-3 Attach sensor cable from the Drum to the connector on the RX2500 Main Mast.
3-4 Tilt machine back up to a standing position.
Product Assembly – Mast Stiffening Plates
STEP 4
Parts:
- Assembly from STEP 3
- 3x Binding Mid Bracket
- 3x Mast Stiffening Plate
- 3x Display Bracket
Hardware:
- 12x Socket Head Screw 5/16” x 5/8”
- 6x Socket Head Screw 5/16” x 1”
- 18x Washer 5/16”
- 12x Nut 5/16
Tools:
- 5/16 Hex Key for 5/16” Socket Screws
5-1 Pre-assembly of Binding Mid Bracket and Mast Stiffening Plate but do not tighten hardware
5-2 Feed sensor cable through Display Bracket and attach Display Bracket and all components as shown below
STEP 5 (Assemble 3 times)
Parts:
- Assembly from STEP 4
- 3x RX2500 Pulley Assembly
Hardware:
- 2x Socket Head Screw 3/8-16
Tools:
- 5/16 Hex Key for 3/8” Socket Head Screws or
- 1/4 Hex Key for 5/16” Button
- 9/16 Hex Socket Ratchet Wrench
5-1 Attach Pulley Assembly to assembly from STEP 4 by sliding it from top of the rail as shown below. Use pull pin to fix pulley in different positions.
5-2 Install “stop screw” as shown and tighten it with an appropriate hex key
5-3 Using 9/16 Socket Wrench remove 2 nuts holding the pulley handle and insert rope inside the plastic sheave groove as shown. Replace the handle and tighten back nuts.
STEP 6
Parts:
- Assembly from prior steps
- 3x Display Bracket (Step 4)
- 3x LCD Display
Hardware:
- 3x Thread Forming #4-20 Screw
Tools:
- 3/16 or 1/4 Hex Key for 5/16” Button Head Screws
- Philips #2 Screw Driver
6-1 Remove bottom screw from LCD display, mount display on bracket and install Thread Forming #4-20 Screw.
Do not over-tighten screw to avoid stripping newly formed plastic threads
6-2 Attach sensor connector from RX2500T Mast to newly installed LCD Display.
Equipment Maintenance
WARNING: Routine inspection and maintenance is of critical importance to ensure maximum safety and performance. We use the highest quality materials available, but wear is inevitable. Be advised that dangerous conditions can arise even during a warranty period. A warranty does not negate the owner’s responsibility to thoroughly, carefully and daily inspect the machine. Consult your physician before starting your exercise program. For your own safety, do not begin any exercise program without proper instruction.
- Check Rope
While the machine is not in use carefully inspect the rope for damage and tears. Carefully inspect connection of rope ends and make sure that stitching (threads) are not torn or damaged. Do not use equipment until damaged rope has been replaced. - Upholstery
Wipe down after every workout.
Periodically take the time to use a mild soap or mild vinyl upholstery cleaner. Avoid using any abrasive cleaner not intended for use on vinyl.
Keep sharp or pointed objects out of your pockets and clear of all upholstery. - Nuts/Bolts/Fasteners
Periodically inspect all nuts and bolts. Tighten if needed. If bolts seem to loosen periodically, use Loctite 242 for a long-term cure.
Go through a re-tightening sequence periodically to ensure that all hardware is properly tensioned. - Adjustments / Locking Pins / Tightening Knobs
Check all pieces for signs of visible wear or damage.
Check springs in Snap Links and Pop Pins for proper tension and alignment.
If the spring sticks or has lost its rigidity, replace it immediately. - Anti-Skid Surfaces
Replace if they appear worn or become slippery. - Warning Instruction Labels
Inspect and familiarize yourself with all safety warnings and other user information on decals. Replace decals if damaged, illegible, or removed.
WARRANTY
We strive to offer the simplest and fastest resolution to all product related concerns. Our warranty service program gives its customers the option to return the product for repair, exchange or refund if the product is determined to be defective.
- All products are warranted to the original purchaser.
- Warranties apply and cover all defects in material and workmanship.
- Customer is responsible for the cost of shipment to ROPEFLEX. Company “ship to” address for product returns and service will be provided once the RMA has been issued. It will be at ROPEFLEX’s discretion to determine the party responsible for cost of shipment back to customer.
- Out-of-Warranty Products are repaired only with the customer’s prior approval. If you have any questions regarding ROPEFLEX equipment or any instruction found in this document, please call 650.549.5888 for assistance.
Documents / Resources
 |
ROPEFLEX RX2500T ORYX Tri Station Rope Machine [pdf] Instruction Manual RX2500T, RX2500T ORYX Tri Station Rope Machine, ORYX Tri Station Rope Machine, Tri Station Rope Machine, Station Rope Machine, Rope Machine, Machine |
Warranty and Registration | ROPEFLEX Fitness Equipment 