8bitdo SN30PROX Bluetooth Controller for Android Instruction Manual

8bitdo SN30PROX Bluetooth Controller for Android

instruction

Bluetooth connectivity

1. press the Xbox button to turn on the controller, white status LED starts to blink
2. press pair button for 3 seconds to enter its pairing mode, white status LED starts to blink rapidly
3. go to your Android device Bluetooth setting, pair with [8BitDo SN30 Pro for Android]
4. white status LED stays solid when the connection is successful
5. the controller will auto-reconnect to your Android device with the press of Xbox button once it has been paired

button swap

1. press and hold any two of the A/B/X/Y /LB/RB/LT/RT buttons you would like to swap
2. press the mapping button to swap them, profile LED blinks to indicate the success of the action
3. press and hold any of the two buttons which have been swapped and press the mapping button to cancel it

custom software

1. button mapping, thumb stick sensitivity adjustment & trigger sensitivity alteration
2. press profile button to activate/deactivate the customization, profile LED turns on to indicate the activation
   please visit https:/ /support.Sbitdo.com/ on Windows to download the software

battery

status – LED indicator –

• low battery mode: red LED blinks
• battery charging: green LED blinks
• battery fully charged: green LED stays solid
  • built-in 480 mAh Li-ion with 16 hours of playtime
  • rechargeable via USB cable with 1- 2 hour charging time

power saving

• sleep mode – 2 minute with no Bluetooth connection and 15 minutes with no use
• press Xbox button to wake up the controller

support 

• please visit support.Sbitdo.com for further information & additional support

FCC regulatory conformance

This device complies with Part 1：5 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Documents / Resources

8bitdo SN30PROX Bluetooth Controller for Android [pdf] Instruction Manual SN30PROX Bluetooth Controller for Android, Bluetooth Controller for Android, Controller for Android

References

• User Manual