Maytag-logo

NFM Maytag Electric Range

NFM-Maytag-Electric-Range-product

Product Information

Specifications

  • Product Type: Freestanding Electric Range
  • Oven Light: 40 W halogen bulb

FAQ

  • Q: How do I register my product?
    • A: Scan the Photo Registration Card or QR code to register your product and access warranty information and troubleshooting guides.
  • Q: What should I do if my oven light goes out?
    • A: Follow the steps provided in the user manual to safely replace the oven light bulb. Remember not to use bulbs rated higher than 40 W.

Product Usage Instructions

Using Your Oven:

  1. Select oven function.
  2. Set the temperature.
  3. Press Start.
  4. Place food inside the oven once set temperature is reached. Close the oven door.
  5. (Optional) Enter time to cook.
  6. The Cancel button can be used to cancel the function during or after cook time.

NOTE

  • For more detailed instructions on specific functions, see the online Control Guide.

Using Your Range:

WARNING

  • Turn off all controls when done cooking to avoid fire hazard.
  • The control knobs can be set between Hi and Med or Melt.
  • Remember that the cooktop area may become hot when the range is in use or during the Self-Cleaning cycle.

Positioning Racks and Bakeware:

IMPORTANT

To avoid damage to the porcelain finish, do not place food or bakeware directly on the oven door or bottom.

  • Position racks before turning on the oven.
  • Do not move racks with bakeware on them.
  • Make sure racks are level.

Moving Racks:

  • To move a rack, pull it out to the stop position, raise the front edge, and then lift out. Refer to the illustration for guidance.

Baking Cookies and Layer Cakes on 2 Racks:

  • For best results when baking cakes on two racks, use the Bake function with racks positioned as instructed. Keep space between the front of the racks and the cakes.

Aluminum Foil

IMPORTANT

  • Do not line the oven bottom with foil. Avoid covering entire oven rack with foil to allow proper air circulation. Do not let foil contact heating elements.

Oven Vent

  • The oven vent should not be blocked or covered to ensure proper air circulation for cooking and cleaning.
  • Keep flammable items away from the oven vent area.

Oven Light Replacement

  1. Disconnect power.
  2. Turn the glass bulb cover counterclockwise to remove.
  3. Replace bulb using gloves or tissue to handle it.
  4. Avoid touching the bulb with bare fingers.
  5. Reconnect power after replacing the bulb.

IMPORTANT: Do not use bulbs rated higher than 40 W.

PRODUCT REGISTRATION AND OWNER INFORMATION

YOUR QR CODE UNLOCKS… product registration and warranty information, installation instructions, how-to videos, and additional accessories to get the most out of your product. If you purchased a smart appliance, your QR code will provide instructions on how to download the app and connect. You can access the full Installation, User Maintenance and Operating Instructions, Warranty details, and more by visiting our website at https://www.maytag.com/owners, or in Canada https://www.maytag.ca/owners. This may save you the cost of a service call. To receive a free printed copy of the information online, call us at 1–800–344–1274 (U.S.A.) /1–800–807–6777 (Canada) or write to us at:

United States:

  • Maytag Brand Appliances
  • Customer eXperience Center
  • 553 Benson Road Benton Harbor, MI 49022–2692

Canada:

  • Maytag Brand Appliances
  • Customer eXperience Centre
  • 200–6750 Century Ave. Mississauga, Ontario L5N 0B7

Register to access warranty information and receive important notifications related to your product. Scan the Photo Registration Card or QR code to register your product.

YOUR QR CODE UNLOCKS

NFM-Maytag-Electric-Range-fig-1

OPERATING INSTRUCTIONS

WARNING

To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in your appliance’s Owner’s Manual, before operating this appliance.

Using Your Oven

  • Step 1. Select oven function.
  • Step 2. Set the temperature.
  • Step 3. Press Start.
  • Step 4. Place food inside the oven once set temperature is reached. Close the oven door.
  • Step 5. (Optional) Enter time to cook.
  • Step 6. The Cancel button can be used to cancel the function during or after cook time.

NOTE

  • For more detailed instructions on specific functions, see the online Control Guide.

Using Your Range

WARNING: Fire Hazard

  • Turn off all controls when done cooking.
  • Failure to do so could result in death or fire.

NFM-Maytag-Electric-Range-fig-2

  • The control knobs can be set to anywhere between Hi and Med or Melt. Push in and turn to setting.

REMEMBER: When range is in use or (on some models) during the Self-Cleaning cycle, the entire cooktop area may become hot.

POSITIONING RACKS AND BAKEWARE

IMPORTANT

  • To avoid permanent damage to the porcelain finish, do not place food or bakeware directly on the oven door or bottom.

Racks

NFM-Maytag-Electric-Range-fig-3

  • Position racks before turning on the oven.
  • Do not move racks with bakeware on them.
  • Make sure racks are level.

To move a rack, pull it out to the stop position, raise the front edge, and then lift out. Use the following illustration as a guide.

BAKING COOKIES AND LAYER CAKES ON 2 RACKS

Baking Layer Cakes

NFM-Maytag-Electric-Range-fig-4

  • For best results when baking cakes on two racks, use the Bake function, a flat rack in rack position 4, and a flat rack in rack position 2.
  • Place the cakes on the racks as shown. Keep at least 3″ (7.6 cm) of space between the front of the racks and the front cakes.

Baking Cookies

  • For best results when baking cookies on two racks, use the Convect Bake function (on some models) and place flat racks in positions 2 and 5.
ALUMINUM FOIL

IMPORTANT

  • To avoid permanent damage to the oven bottom finish, do not line the oven bottom with any type of foil or liner.
  • For best cooking results, do not cover entire oven rack with foil because air must be able to move freely.

IMPORTANT

  • Do not allow aluminum foil and meat probes to contact heating elements.

OVEN VENT

NFM-Maytag-Electric-Range-fig-5

  • The oven vent releases hot air and moisture from the oven, and should not be blocked or covered.
  • Blocking or covering the oven vent will cause poor air circulation, affecting cooking and cleaning results.
  • Do not set plastics, paper or other items that could melt or burn near the oven vent.

OVEN LIGHT

The oven light is a 40 W halogen bulb. Before replacing, make sure the oven and cooktop are cool and the control knobs are in the Off position.

To Replace:

  1. Disconnect power.
  2. Turn the glass bulb cover in the back of the oven counterclockwise to remove.
  3. Remove bulb from socket.
  4. Replace bulb, using tissue or wearing cotton gloves to handle bulb. To avoid damage to or decreasing the life of the new bulb, do not touch bulb with bare fingers.
  5. Replace bulb cover by turning clockwise.
  6. Reconnect power.

IMPORTANT

  • Do not use lamps rated higher than 40 W.

SABBATH MODE

  • The Sabbath Mode sets the oven to remain on in a bake setting until disabled.
  • For guidance on usage and a complete list of models with Sabbath Mode, visit www.star-k.org or contact us as per the information provided above.

®/™ ©2023 Maytag. All rights reserved. Used under license in Canada.

Documents / Resources

Maytag NFM Maytag Electric Range [pdf] User Guide
NFM Maytag Electric Range, NFM, Maytag Electric Range, Electric Range, Range

References

Leave a comment

Your email address will not be published. Required fields are marked *