Electrolux Pure 300 Air Purifier User Manual

Electrolux Pure 300 Air Purifier User Manual

Contents hide

1 ⚠ SAFETY INFORMATION

2 ELECTRICAL INFORMATION

3 SAFETY PRECAUTIONS

4 BEFORE STARTING

5 DESCRIPTION OF YOUR AIR PURIFIER

6 SET UP

7 FEATURE ICONS AND INDICATORS

13 Documents / Resources

13.1 References

⚠ SAFETY INFORMATION

WARNING! Avoid fire hazard or electric shock. Do not use an extension cord or a wall adapter other than the one provided with the product or original spare part adapter. This appliance can be used in 50Hz or 60Hz power supply without any change. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read product labels for flammability and other warnings. Do not let water or any other liquid or flammable detergent enter the appliance to avoid electric shock and/or a fire hazard.

CHILDREN AND VULNERABLE PEOPLE SAFETY
WARNING! Risk of suffocation, injury or permanent disability.
This appliance can be used by children aged from 8 years and above under supervision. The appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should be supervised to ensure that they do not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Children under 3 years of age should be kept away from the appliance unless continuously supervised.
Keep all packaging away from children.
This product has a child lock function. We recommend you activate this function if there is a risk that children can come in contact with the appliance.

ELECTRICAL INFORMATION

WARNING! Avoid fire hazard or electric shock.
If you are not sure the outlet is adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper outlet according to the National Electrical Code and applicable local codes and ordinances.
Never unplug the unit by pulling on the wall adapter cable. Always grip the appliance connector or wall adapter firmly and pull straight out from the receptacle.
Always call an authorized Electrolux servicer for repairs.
If the adapter housing is damaged, it must be replaced with a new Electrolux spare part adapter designed for this appliance.
Be sure to unplug the unit before cleaning or maintenance to prevent shock or fire hazards.

SAFETY PRECAUTIONS

CAUTION! Avoid Serious Injury or Death.
Do not insert or place fingers or objects into the air outlet grill of the unit. In the event of a malfunction (sparks, burning smell, etc.), immediately stop the operation, disconnect the power supply, and call an authorized Electrolux servicer. Do not operate the unit with wet hands.
CAUTION! Avoid Injury or damage to the unit or other property.
Do not direct airflow at fireplaces or other heat related sources as this could cause flare ups. Do not climb on or place objects on the unit. Do not hang objects off the unit. Do not place containers with liquids on the unit. Turn off the unit at the power source when it will not be used for an extended period of time. Always operate the unit with air filter in place. Do not block or cover the intake grille or the air outlet grill. Ensure that any electrical/electronic equipment is 30cm away from the unit. The appliance is only to be used with the accessories provided from the manufacturer and its service agent.

DISPOSAL
This symbol on the product or on its packaging indicates that the product may not be treated as household waste.
To recycle your product, please take it to an official collection point or to an Electrolux service center that can remove and recycle electric parts in a safe and professional way. Follow your country’s rules for the separate collection of electrical products.
This product is designed with the environment in mind. All plastic parts are marked for recycling purposes.

BEFORE STARTING

Read this instruction carefully.

Check that all parts described are included.
Pay special attention to the safety precautions!

DESCRIPTION OF YOUR AIR PURIFIER

Appliance:

A. Control panel display
B. Air flow guide (Air outlet)

C. Release buttons
D. Main body (top)

E. Sensor box
F. Adapter jack

G. Main body (bottom)
H. Power cord

I. Filter (inside)
Control panel:
J. ON/OFF button

K. FAN button
L. MODE button

M. Warning alert icon
N. Filter change icon

O. Wifi icon*
P. Scheduler icon*

Q. Child lock icon
R. MODE indicator

S. FAN SPEED indicator
T. Air quality indicator

* The features only available for Pure 500 series.

NOTE: Your specific model may not have all the components and features listed within this USER MANUAL. Please check the product packaging OR the product specification page on our website for exact details of your model. Electrolux reserves the right to change information contained herein without notice.

Refer to pages 7-9 for further details about the description of the images. To enjoy peace of mind register your appliance today at www.electrolux.com. Stay updated on better living services, safety notices and shop for accessories that match your appliance. Features might be added or updated with new app releases.

SET UP

Note: Please remove the protective film on the control panel display for better usage. Remove the plastic bag around the filter before using the product. Always keep unit OFF when changing the filters.

Open the main body of the unit Open the product by pressing the release buttons on the sides of the unit, then lift up the top part of the main body. (ref. page 5, picture 1).
Take out the filter and remove the filter bag Carefully remove the plastic bag around the filter and discard appropriately.
Install the filter Carefully insert the filter back into the product (either end of the filter works). Make sure that the filter is placed in the center of the cavity.
Put back the top part of the main body Put back the top part of the main body to close the product till it is securely in place. The mark “FRONT” should be facing the front side of the product.

OPERATION

Caution: After filter is installed correctly, please ensure product is placed on a levelled surface before proceeding further. Ensure there is enough free space over and around the product.

5 Connect the power plug.
6 Power on Press the ON/OFF button to turn ON the air purifier, the unit will run in default setting (SMART mode) when using the product the first time. Next time you start the unit it will resume the last settings you had before turning OFF the product.
NOTE: When turning ON the air purifier, it will take about 10 seconds for the sensors to calibrate and analyse the air quality. During this time, the air quality indicator will pulsate slowly in white.
7 Mode selection Press the MODE button once to toggle between the two modes: SMART and MANUAL
SMART: In the SMART mode, the unit will utilize the sensor data as input to decide on the appropriate fan speed, depending on the air quality in the room. The fan speed can not be adjusted by the user under this mode. Please see the AIR QUALITY INDICATOR section for more details.

SMART QUIET: In the SMART QUIET mode, the unit will run as quiet (control panel indicators dimmed & lower fan speed) as possible to allow for sleep.
MANUAL: In the MANUAL mode, the unit will utilize the sensor data as input only to show the air quality level via the air quality indicator but will not self-adjust the fan speed. This mode is best utilized for a quick burst of cleaning, especially when the user anticipates an increase in particulate matter in the room due to household chores (e.g. vacuuming).
8 Air speed control While in MANUAL mode, Press the FAN button to adjust the fan speed, the fan speed indicator will show the fan speed.
The unit has 3 levels fan speed.
NOTE: The unit will ramp up OR down to chosen speed setting gradually.

FEATURE ICONS AND INDICATORS

ONBOARDING

NOTE: Some steps in the onboarding flow may have changed, please follow step by step instructions in the latest version of the App as reference in case of discrepancy. Please ensure home WiFi is running on 2.4 GHz band, as the 5GHz band will not be recognized by the air purifier.

15 Please find the Electrolux App in the iOS App or Google Play store, download it, sign up and login to the App. Here you will be able to `Add a device’ in the App and follow the step by step instructions for onboarding the unit. (ref. page 5, picture 3).

REPLACING FILTER

NOTE: The filter cannot be washed and must always be replaced when at end of life. The air purifier have a variety of filters to choose from, tailored to your lifestyle needs. Head over to the App or the product information page on our website for a guide on choosing the appropriate filter for your needs. Please visit your local website to order your replacement filter.

16 For the best experience and to secure an uninterrupted use of the air purifier, please monitor the filter’s remaining lifetime in the App and order a replacement filter in due time before the remaining filter lifetime reaches 0%. If you have notifications enabled, the App will inform you when the filter life is close to end of life (e.g. at 5%).

17 When the filter is at end of life, the filter change icon will light up on the product control panel to indicate the need for replacement. When filter is at end of life, the unit’s fan speed may be reduced in SMART mode.
18 The used filter might be heavily coated with dust and particulate matter so before opening the main unit, please ensure a disposable bag or packaging is at hand to place the used filter in.
19 Turn OFF the air purifier or unplug the unit before changing the filters. Remove the top part of the main body put it aside. Next remove the filter which is at end of life and place it in a disposable bag at hand. (ref. page 6, picture 12).

20 Next, please remove the plastic bag from the replacement filter and insert the filter in to the product. Reinsert back the top part of the main body and turn ON the unit. Reset the filter change icon on the product control panel by long pressing the MODE button for 3 seconds and the App will indicate the same, with a new filter lifetime reading. NOTE: In case the change is only reflected on the product control panel and not the App, please restart the App and the unit, before further troubleshooting.
21 Discard the used filter as well as any plastic packaging according to local recycling guidelines.

CARE AND CLEANING

NOTE: Always unplug the air purifier before cleaning to prevent shock or fire hazards. Never use abrasive, harsh detergents OR wax for cleaning the unit. The high efficiency filters cannot be washed, they must always be replaced when at the end of life.

22 Cleaning the air quality sensor box and sensor (page 6, picture 13)
NOTE: Clean every 1-2 months to maintain the performance of the air quality sensor.
Ensure that the air quality sensor is kept clean and unclogged for optimal performance of the unit. It is natural for dust to accumulate in this area, vacuuming of the sensor box inlet grill with a vacuum cleaner that has a narrow nozzle/brush.
Cleaning the sensor: Open the sensor box inlet grill with finger and clean the lens, inlet and outlet with wet cotton swab. Use dry cotton swab to remove any excess water from the sensor.
After having cleaned the sensor box, we recommend to vacuum clean the filter at the same time. (ref. page 6, picture 13:2)
23 The plastic parts of the unit should be cleaned with an oil-free dry cloth. For stains on plastic parts, use a slightly damp soft microfiber cloth to gently rub against the stain. (ref. page 6, picture 14).
24 The area around the air inlet on the bottom of the unit may accumulate more dust than some other parts and hence may require more frequent cleaning to ensure optimal performance. The filter is equipped with a mesh filter and should occasionally be wiped off or cleaned with a vacuum cleaner to avoid loss of performance.

STORAGE

25 If you are not planning to use the appliance for a long time, cover it with plastic or return it to its carton.
NOTE: The multi-layer filter can not be washed, it can only be replaced.
CAUTION! Do not touch the fan blade when removing the multi-layer filter.

TROUBLESHOOTING

When fault indicators show that the system is not operating properly, perform the following check.
The table below is only a limited list. For the latest and complete section on troubleshooting, FAQ and error guide please refer to the corresponding section on our website or the Electrolux App.