RDR-HX710/HX910
RMT-D217P
SERVICE MANUAL
AEP Mode
System
Laser: Semiconductor laser
Channel coverage:
PAL/SECAM (B/G, D/K, I, L)
VHF: E2 to E12, R1 to R12, F2 to F10, Italian
A to H, Ireland A to J, South Africa 4 to 13/
UHF: E21 to E69, R21 to R69, B21 to B69,
F21 to F69/CATV: S01 to S05, S1 to S20,
France B to Q/HYPER: S21 to S41
The above channel coverage merely ensures the channel reception within these ranges. It does not guarantee the ability to receive signals in all circumstances.
Video reception: Frequency synthesizer system
Audio reception: Split carrier system
Aerial out: 75-ohm asymmetrical aerial socket
Timer: Clock: Quartz locked/Timer indication: 24-hour cycle (digital)/Power back-up duration: 1 hour
Video recording format: MPEG Video
Audio recording format/applicable bit rate: Dolby Digital 2 ch/256 kbps
SPECIFICATIONS
Inputs and outputs LINE 2 OUT
(AUDIO): Phono jack/2 Vrms/10 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, C: 0.3 Vp-p (PAL)
LINE 2 IN/LINE 4 IN
(AUDIO): Phono jack/2 Vrms/more than 22 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, C: 0.3 Vp-p (PAL)
LINE 1 – TV: 21-pin CVBS IN/OUT
S-Video/RGB OUT (upstream)
LINE 3/DECODER: 21-pin
CVBS IN/OUT
S-Video/RGB IN
S-Video OUT (downstream)
Decoder
DV IN: 4-pin/i.LINK S100
DIGITAL OUT (OPTICAL): Optical output jack/
–18 dBm (wave length: 660 nm)
DIGITAL OUT (COAXIAL): Phono jack/0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT
(Y, PB/CB, PR/CR):
Phono jack/Y: 1.0 Vp-p, PB/CB: 0.7 Vp-p,
PR/CR: 0.7 Vp-p
General
Power requirements: 220-240 V AC, 50/60 Hz
Power consumption:
RDR-HX710: 53 W
RDR-HX910: 55 W
Dimensions (approx.): 430 × 65 × 328 mm (width/height/depth) incl. projecting parts
Hard disk drive capacity:
RDR-HX710: 160 GB
RDR-HX910: 250 GB
Mass (approx.): 4.9 kg
Operating temperature: 5°C to 35°C
Operating humidity: 25% to 80%
Supplied accessories:
Mains lead (1)
Aerial cable (1)
Remote commander (remote) (1)
R6 (size AA) batteries (2)
Specifications and design are subject to change
without notice.
Compatible colour systems
This recorder is designed to record using the PAL colour system and playback using the PAL or NTSC colour systems.
The signals of the SECAM colour system can be received or recorded but played back in the PAL colour system only. Recording of video sources based on other colour systems cannot be guaranteed.
DVD RECORDER
8-1. EXPLODED VIEWS
NOTE:
- -XX, -X mean standardized parts, so they may have some differences from the original one.
- Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.
8-1-1. OVERALL SECTION
SECTION 8 REPAIR PARTS LIST
- The mechanical parts with no reference number in the exploded views are not supplied.
RDR-HX710/HX910
The components identified by a mark 
or dotted line with a mark are critical for safety. Replace only with the part number specified.
| Ref. No. | Part No. | Description | Remarks | Ref. No. | Part No. | Description | Remarks |
| 1 1 1 3 3 3 4 * 5 * 6 |
7 8 9 10 11 12 12 14 14 |
8-1-2. CHASSIS SECTION
| Ref. No. | Part No. | Description | Remarks | Ref. No. | Part No. | Description | Remarks |
| 51 52 53 54 55 55 56 57 58 59 60 61 |
6263 * 64 * 64 65 66 67 68 69 69 70 |
Documents / Resources
 |
SONY RDR-HX710 DVD and Harddisk Recorder [pdf] Owner's Manual RDR-HX710, RDR-HX910, DVD and Harddisk Recorder, Harddisk Recorder, DVD Recorder, RDR-HX710, Recorder |
