SUNSUN

SUNSUN CET-8000 Adjustable Eco Tin Pump

SUNSUN-CET-8000-Adjustable-Eco-Tin-Pump

Product Information

This SuperECO pond pump with control element is designed for use in (garden) ponds, rock gardens, aquariums, and seafood aquariums. It features automatic shutdown in case of overvoltage or dry running (lack of water).

Specifications

Unpacking:
If any damage is noticed during unpacking (e.g., transport damage), contact the seller immediately.

Safety Instructions:

  • Avoid direct sunlight and exposure to water that can damage the pump.
  • Ensure proper ventilation and airflow to prevent overheating.
  • Clean with a dry cloth only; do not use cleaning agents or allow water inside the device.
  • Repairs, maintenance, and adjustments should be carried out by qualified personnel.

Product Usage Instructions

Installation:

  1. Report any damages to the seller immediately.
  2. Verify that the power supply matches the specifications on the product label.
  3. Connect the hose ensuring no air bubbles are present.
  4. Choose the appropriate outlet piece, connect the hose, and secure it in place.
  5. Ensure a consistent and level water surface.
  6. Install the pump on a stable surface above the pond bottom.
  7. Connect the pump to the control element using the four-wire cable and secure it.

Control Element:
The control element includes a control panel, buttons, and a stand. It features Start and Stop functions for operation.

FAQ:

Q: What should I do if the pump stops working suddenly?
A: Check for any power supply issues, ensure proper water flow to the pump, and inspect for any clogs or obstructions in the system.

Q: Can this pump be used in saltwater aquariums?
A: Yes, this pump is suitable for use in both freshwater and saltwater aquariums.

Documents / Resources

SUNSUN CET-8000 Adjustable Eco Tin Pump [pdf] Instruction Manual
CET-8000 Adjustable Eco Tin Pump, CET-8000, Adjustable Eco Tin Pump, Eco Tin Pump, Tin Pump, Pump

References

Leave a comment

Your email address will not be published. Required fields are marked *