O.n logo

TWINY

Cod. 23.8600.95

TWINY 23.8600.95 2 Multicolor LED Table Lamps A1

KIT 2 MULTICOLOR LED TABLE LAMPS
Installation manual

CE      Dustbin ZA1

POSITION OF CONTROLS

Back of the lamp

TWINY 23.8600.95 2 Multicolor LED Table Lamps A2

  1. FADING COLOR CHANGE + 7 DIGITAL MODES
  2. 7 FIXED COLORS (GREEN – LIGHT BLUE – BLUE – FUCHSIA – PINK – RED – YELLOW)
  3. THE LIGHTS MOVE IN TIME TO THE MUSIC
  4. ON-OFF Switch

Infrared remote control 18 keys

TWINY 23.8600.95 2 Multicolor LED Table Lamps A3

  1. ON-OFF Switch
  2. 7 FIXED COLORS (GREEN – LIGHT BLUE – BLUE – FUCHSIA – PINK – RED – YELLOW)
  3. In the color changing mode, the speed increases; In monochrome mode, the brightness increases
  4. DIGITAL MODES
  5. AUTOMATIC SHUT-OFF AFTER 5 MINUTES
  6. COLOR GRADATION
  7. In color changing mode, the speed decreases; In monochrome mode, the brightness decreases
  8. THE LIGHTS MOVE IN TIME TO THE MUSIC
OPERATING INSTRUCTIONS
  1. Connect the lamp to a 5Vdc/1A power supply (not included) with USB input
  2. Press the ON/OFF button to turn on the lamp
  3. Make the desired light adjustment using the buttons on the back of the lamp or on the remote control
  4. Press the ON/OFF button to turn off the lamp
TECHNICAL SPECIFICATIONS
TABLE LED LAMP

Plastic structure
Switch and dimmer
Infrared remote control
USB cable – 3M. (total)
Digital RGB
15 color modes
Music rhythm sensor
Power 5W
Lighting angle: 270°
Power supply 5V– 1A (max)
Dimensions Lamp: 31 x 300 x 29 mm.
Base dimensions: 90 x 90 x 25mm.
Kit weight: 130 g.
Power supply NOT included
Remote control power supply: 1 CR2025

IMPORTANT SAFETY INSTRUCTIONS

Read Instruction
The manufacturer accepts no responsibility for uses other than those indicated in the instructions or in case of unauthorized modifications of the unit.

– Carefully read the instructions and precautions and keep them close to the device. Failure to heed the precautions may cause accidents and serious damage to health.

  1. Read these instructions.
  2. Keep these instructions.
  3. Pay close attention to all warnings.
  4. Connect the unit to a power source of the type indicated in the instructions or on the device itself.
  5. Do not connect or disconnect the power supply with wet hands.
  6. Any repairs or alterations must be performed by a qualified / authorized service center.
  7. Use the device only for its intended purpose and described in this manual. Do not use accessories other than those approved by the manufacturer.
  8. Keep the unit away from children.
  9. In the event of failure or accidental breakage, unplug it immediately and contact a qualified technician or authorized service center.
  10. Never set the LEDs with the eyes, as direct and prolonged exposure may cause eye damage.

Warranty claims will be accepted if the goods are shipped fully assembled and well packed along with a brief description of the fault, as well as a receipt or invoice (date of purchase and the print dealer) for the appropriate service center.

Dustbin ZA1

INFORMATION FOR THE USERS

At the end of its life, the device has to be separated from the other waste. Consign the device and all its components together to a center of electronical and electrotechnical waste recycling center, designated by your local authorities.

Due to the continuous evolution of products, features and design of this model may change without notice. Keep, the installation manual.

KON.EL.CO S.p.A. – Piazza Don E. Mapelli, 75 – 20099 – Sesto S. Giovanni – MI – Italy

Made in China

Documents / Resources

TWINY 23.8600.95 2 Multicolor LED Table Lamps [pdf] Installation Guide
23.8600.95, 23.8600.95 2 Multicolor LED Table Lamps, 2 Multicolor LED Table Lamps, LED Table Lamps, Table Lamps, Lamps

References

Leave a comment

Your email address will not be published. Required fields are marked *