BRExhaust logoINSTALLATION INSTRUCTIONS
PART NO. 106-0086

106-0086 Direct Fit Exhaust Honda

BRExhaust 106-0086 Direct Fit Exhaust HondaWARNING:
When working on, under, or around any vehicle exercise caution.
Please allow the vehicle’s exhaust system to cool before removal, as exhaust temperatures may cause severe burns. If working without a lift, always consult vehicle manual for correct lifting specifications.
Always wear safety glasses and ensure a safe work area. Serious injuryor death could occur if safety measures are not followed.
STEP 1:
(Carefully read all instructions before installation) Disconnect the vehicle’s battery before removal of the OEM exhaust system. This will prevent electrical accidents and will reset the computer if it applies to the vehicle. Remove existing exhaust system from the vehicle. Only remove parts that will be replaced. Clean existing flange with a wire brush to ensure proper sealing.
STEP 2:
Attach item 2 to existing exhaust with item 1, existing isolator and install clamp(s) provided with item 2
STEP 3:
Attach item 5 to item 2 with items 3 and 4
STEP 4:
Ensure new exhaust is not contacting any portion of the underbody of the vehicle or drivetrain.
STEP 5:
Tighten all clamps starting from rear of the vehicle. (DO NOT EXCEED 30FT-LB WHEN TIGHTENING CLAMP AND CHECK ALL CLAMPS AFTER 50 MILES. RETIGHTEN IF NECESSARY)
BRExhaust 106-0086 Direct Fit Exhaust Honda - Icon BRExhaust recommends professional installation for all productsBRExhaust logo

Technical Support: 1-800-631-7271
BRExhaust — 1901 Corporate Ctr, Oceanside, CA 92056
www.brexhaust.com

Documents / Resources

BRExhaust 106-0086 Direct Fit Exhaust Honda [pdf] Instruction Manual
106-0086 Direct Fit Exhaust Honda, 106-0086, Direct Fit Exhaust Honda, Fit Exhaust Honda, Exhaust Honda, Honda

References

Leave a comment

Your email address will not be published. Required fields are marked *