PYRAMID-LOGO

PYRAMID CB750 Honda Hornet Handguards

PYRAMID-CB750-Honda-Hornet-Handguards-PRODUCT

Product Information

Specifications:

  • Product Name: Honda CB750 Hornet Handguards
  • Model Number: 30192
  • Kit Includes:
    • 2X Handguards (pair)
    • 2X Brackets (pair)
    • 2X Bar End (pair)
    • 2X M6X100mm Countersunk Bolt
    • 2X M6 Countersunk Washer
    • 2X M6 Washer
    • 2X M6 Spacer
    • 4X M5X16mm Bolt
    • 4X M5 Nyloc Nut
    • 4X M5 Collar

Product Usage Instructions

  1. Remove the plastic bar ends from both sides of the handlebars.
  2. Remove both mirrors.
  3. Loosely attach the brackets underneath the mirror mounting points.
  4. Loosely attach the handguards and bar ends in sequence.
  5. Loosely attach the brackets to the handguards using the M5 fittings supplied.
  6. Now tighten all of the fixing points and adjust the mirrors if needed. This can be achieved by adjusting the two nuts on the mounting point of the mirror.
  7. Check fixings periodically.

FAQ:

  • Q: How do I adjust the mirrors after installing the handguards?
    • A: To adjust the mirrors, tighten all fixing points first, then adjust the two nuts on the mirror mounting points until the mirrors are positioned correctly.
  • Q: Can I use these handguards on other motorcycle models?
    • A: These handguards are specifically designed for Honda CB750 Hornet. Compatibility with other models may vary.
  • Q: How often should I check the fixings?
    • A: It is recommended to check the fixings periodically, especially after riding on rough terrain or if you notice any loosening of the handguards.
  • Contact us at: sales@pyramid-plastics.co.uk
  • +44 (0)1427 677990
  • Website: www.pyramid-plastics.co.uk

Kit Includes: 

PYRAMID-CB750-Honda-Hornet-Handguards-FIG3

  • Remove the plastic bar ends from both sides of the handlebars.
  • Remove both mirrors.
  • Loosely attach the brackets underneath the mirror mounting points (see Fig 1 & 2).
  • Loosely attach the handguards and bar ends (see Fig 3 for sequence).
  • Loosely attach the brackets to the handguards using the M5 fittings supplied (see Fig 4).
  • Now tighten all of the fixing points and adjust the mirrors if needed – this can be achieved by adjusting the two nuts on the mounting point of the mirror.
  • Check fixings periodically.

PYRAMID-CB750-Honda-Hornet-Handguards-FIG1

Any questions?

PYRAMID-CB750-Honda-Hornet-Handguards-FIG2

Follow us on social media and feel free to leave us a review!

Documents / Resources

PYRAMID CB750 Honda Hornet Handguards [pdf] Instruction Manual
CB750, CB750 Honda Hornet Handguards, Honda Hornet Handguards, Hornet Handguards, Handguards

References

Leave a comment

Your email address will not be published. Required fields are marked *