Contents hide
1 SUPERATV IN-TSK-H-TAL-007 Honda Talon Deluxe Self Canceling Turn Signal Kit
2 INSTRUCTIONSTION INSTRUCTIONS
3 CUSTOMER NOTIFICATION AND DISCLAIMER LIABILITY
4 Accessory to Turn Signal Kit Wiring
5 Specifications
6 FAQ
7 Documents / Resources
7.1 References

SUPERATV-LOGO

SUPERATV IN-TSK-H-TAL-007 Honda Talon Deluxe Self Canceling Turn Signal Kit

SUPERATV-IN-TSK-H-TAL-007-Honda-Talon-Deluxe-Self-Canceling-Turn-Signal-Kit-PRODUCT

INSTRUCTIONSTION INSTRUCTIONS

Plug and Play Turn Signal Kit:

  • Do not discard packaging until the product has been successfully installed.
  • Components may be installed in locations other than where shown. Alway verify the wire harness length.
  • While routing, follow factory wiring when possible.
  • Use provided dielctric grease on all connections.
  • Always consult labels on Harnesses when making connections.
  • Avoid rotating or hot components when securing.
  • Before drilling any holes, check behind area to be drilled for any interference.

SUPERATV-IN-TSK-H-TAL-007-Honda-Talon-Deluxe-Self-Canceling-Turn-Signal-Kit-FIG-1

Read instructions and view illustrations before beginning. Thank You

SUPERATV-IN-TSK-H-TAL-007-Honda-Talon-Deluxe-Self-Canceling-Turn-Signal-Kit-FIG-2

Horn and ECU:

  • User may install Horn and ECU in locations different than shown.
  • Illustration is SuperATV’s choice.SUPERATV-IN-TSK-H-TAL-007-Honda-Talon-Deluxe-Self-Canceling-Turn-Signal-Kit-FIG-3
  • Connect Harnesses to Horn and ECU.
  • Secure all Wires as needed.SUPERATV-IN-TSK-H-TAL-007-Honda-Talon-Deluxe-Self-Canceling-Turn-Signal-Kit-FIG-4SUPERATV-IN-TSK-H-TAL-007-Honda-Talon-Deluxe-Self-Canceling-Turn-Signal-Kit-FIG-5

Switch Mounting:

  • User may install Switches in locations difffferent than shown.
  • Connect Switches to Harnesses and secure. SuperATV recommends testing Switches before permanently mounting.SUPERATV-IN-TSK-H-TAL-007-Honda-Talon-Deluxe-Self-Canceling-Turn-Signal-Kit-FIG-6

LED Signals

  • User may install in locations different than shown.
  • Illustration is SuperATV’s choice.
  • Drill a Ø3/4” hole in body and install an LED Signal. Repeat for remaining LED Signals.
  • Plug LED Signals into corresponding inputs on the Harness.
  • Secure all Wires as needed.

SUPERATV-IN-TSK-H-TAL-007-Honda-Talon-Deluxe-Self-Canceling-Turn-Signal-Kit-FIG-7

If Light is hard to insert separate as shown.

SUPERATV-IN-TSK-H-TAL-007-Honda-Talon-Deluxe-Self-Canceling-Turn-Signal-Kit-FIG-8

  • Separate LED from Gasket.
  • Install Gasket into the hole.
  • Install LED into the Gasket.
  • SUPERATV-IN-TSK-H-TAL-007-Honda-Talon-Deluxe-Self-Canceling-Turn-Signal-Kit-FIG-9Reinstall Console and Glovebox.

Rear

  • Remove the Rear Cover and disconnect the stock Harness.
  • Connect Harness to Stock Harness.
  • Secure all Wires as needed.
  • Reinstall the Rear Cover.SUPERATV-IN-TSK-H-TAL-007-Honda-Talon-Deluxe-Self-Canceling-Turn-Signal-Kit-FIG-10
  • If connecting License Plate Light (not included), do so at this time.

SUPERATV-IN-TSK-H-TAL-007-Honda-Talon-Deluxe-Self-Canceling-Turn-Signal-Kit-FIG-11

CUSTOMER NOTIFICATION AND DISCLAIMER LIABILITY

This product is a modification for utility task vehicles and all-terrain vehicles. Use this product at your own risk.

Warranty and Liability Limitations
The Buyer hereby assumes all risks associated with the use and/or installation of this product. Buyer waives all liability claims against SuperATV® of any kind or nature, including, but not limited to, liability for penalties, fines, property damage, personal injury or death, to the fullest extent permitted by law. Buyer acknowledges and agrees that SuperATV® is not liable for any direct, indirect, incidental, consequential or special damages, including but not limited to, damage, loss of life, loss of property or equipment, loss of profits or revenue, injury, or claims from any individual or entity arising from the use of this product. The warranty for this product, if any, may give you (“Buyer”) specific legal rights, and Buyer may also have other rights which may vary from state to state. The installation of this product may void or otherwise adversely affect your factory warranty. Consult your vehicle warranty before using this Product. Under no circumstances will SuperATV® be liable for the voidance of the Buyer’s vehicle warranty. Buyer assumes all risk and responsibility if a manufacturer and/or dealer voids the Buyer’s vehicle warranty due to the use of this Product.

Safety and Laws.
 Operate your vehicle at all times in a safe manner. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you. The installation of this product may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of this product on public streets, roads, or highways may be in violation of law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of this product. In no case will SuperATV® be held liable if the Buyer violates the law or uses the product in an unsafe manner. The Buyer is responsible for fully understanding the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold  SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.

Installation.
 The installation of this product on your vehicle indicates that you have had the opportunity to inquire about applicable local, state, and federal laws and ordinances and that you have read understand, and accept all of the terms of, this Disclaimer. SuperATV® shall not be responsible for the proper installation, use, and service of this product. Rather, the Buyer shall be solely responsible for the installation of the product and any damage that may be done to the vehicle or vehicle components as a result of modifications made by the Buyer.

Accessory to Turn Signal Kit Wiring

Left Turn Signal Harness shown in illustrations.

SUPERATV-IN-TSK-H-TAL-007-Honda-Talon-Deluxe-Self-Canceling-Turn-Signal-Kit-FIG-12

Accessory to Turn Signal Kit Wiring continued

SUPERATV-IN-TSK-H-TAL-007-Honda-Talon-Deluxe-Self-Canceling-Turn-Signal-Kit-FIG-13 SUPERATV-IN-TSK-H-TAL-007-Honda-Talon-Deluxe-Self-Canceling-Turn-Signal-Kit-FIG-14

SuperATV recommends using a handheld mini torch, or lighter, to activate heat shrink on Connector.

Need help with your installation?

Specifications

  • Product: Plug and Play Turn Signal Kit for Honda Talon
  • Model Numbers: IN-TSK-H-TAL-007 / IN-TSK-H-TALX4-007
  • Installation Date: 7/28/2023
  • Manufacturer: SuperATV

FAQ

Q: Can I install the components in locations other than those shown in the manual?
A: Yes, you may install the ECU, Horn, and switches in different locations as needed. Ensure proper connections and secure all wires.

Q: What should I do if I encounter difficulties during installation?
A: If you encounter any difficulties during installation, contact SuperATV customer support at sales@superatv.com or call 1-855-743-3427 for assistance.

Documents / Resources

SUPERATV IN-TSK-H-TAL-007 Honda Talon Deluxe Self Canceling Turn Signal Kit [pdf] Instruction Manual
IN-TSK-H-TAL-007, IN-TSK-H-TALX4-007, IN-TSK-H-TAL-007 Honda Talon Deluxe Self Canceling Turn Signal Kit, IN-TSK-H-TAL-007, Honda Talon Deluxe Self Canceling Turn Signal Kit, Deluxe Self Canceling Turn Signal Kit, Canceling Turn Signal Kit, Turn Signal Kit

References

Leave a comment

Your email address will not be published. Required fields are marked *