Cuisinart-LOGOCuisinart SPB-650 1 HP Blender

Cuisinart SPB-650 1 HP Blender-LOGO

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic safety precautions should always be followed, including the following:

  1. READ ALL INSTRUCTIONS BEFORE USING.
  2. To protect against the risk of electrical shock, do not put motor base of blender in water or other liquids.
  3. Close supervision is necessary when any appliance is used by or near children.
  4. Unplug from outlet when not in use, before putting on or taking off parts and before cleaning or removing contents from blender jar. Never put hands into the blender jar or handle the blades with the appliance plugged in.
  5. Avoid contact with moving parts.
  6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner. Return appliance to nearest Cuisinart service facility for examination, repair and/or mechanical or electrical adjustment.
  7. The use of attachments not recommended or sold by Cuisinart may cause fire, including canning or ordinary jars, electrical shock or risk of injury to persons.
  8. Do not use outdoors.
  9. Do not let cord hang over edge of counter or table or touch hot surfaces.
  10. Keep hands and utensils out of jar while blending to reduce the risk of severe injury to persons or damage to blender itself. A rubber or plastic spatula may be used, but must be used only when the blender is turned off.
  11. When blender is on, and LED lights are illuminated or flashing, do not touch cutting assembly, interfere with blade movement or remove blender jar cover. Accidentally touching a speed button may activate the blender.
  12. BLADES ARE SHARP. HANDLE CAREFULLY.
  13. To reduce the risk of injury, never place cutting assembly on base unless the blender jar is properly attached.
  14. Always operate blender with the cover in place.
  15. Never leave your blender unattended while it is running.
  16. Twist removable blade assembly firmly to blender jar. Injury can result if moving blades accidentally become exposed.
  17. Regarding your cord set: A longer cord has been provided so that you will have flexibility in positioning your Cuisinart® VELOCITY Ultra 1HP Blender. Exercise care when using the longer cord to avoid entangling or tripping over the cord. The longer cord should be arranged so that it will not drape over the counter or tabletop, where it can be pulled on by children or tripped over. Excess cord should be stored in the cord storage area at the back of the blender base to avoid injury caused by the longer cord.
  18. Wash the blender jar, blade assembly and cover before first use.
  19. WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK OR FIRE, DO NOT REMOVE THE BASE PANEL. NO USERSERVICEABLE PARTS ARE INSIDE. REPAIR SHOULD BE DONE ONLY BY AUTHORIZED PERSONNEL.
  20. WARNING: FLASHING LIGHT INDICATES READY TO OPERATE. DO NOT TOUCH BLADES.
  21. When blending hot liquids in blender jar, remove measured pour lid to allow steam to escape.
  22. Do not operate your appliance in an appliance garage or under a wall cabinet. When storing in an appliance garage always unplug the unit from the electrical outlet. Not doing so could create a risk of fire, especially if the appliance touches the walls of the garage or the door touches the unit as it closes.
  23. Do not blend carbonate beverages in the blender jar.
    SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY

NOTICE:
This appliance has a polarized plug (one prong is wider than the other). To reduce the risk of electric shock, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. This appliance comes with a resettable thermal device to prevent damage to the motor in the case of extreme overload. Should the unit shut off unexpectedly, unplug it and let it cool for at least 15 minutes before continuing (see “To reset the unit,” on page 6). Maximum of 750 watts rated power is based on Cuisinart® jar.

UNPACKING INSTRUCTIONS

  1. Place the box containing your Cuisinart® VELOCITY Ultra 1 HP Blender on a flat, sturdy surface before unpacking.
  2. Open the top flaps and remove the instruction booklet and other printed materials from top of the pulp tray.
  3. Set the large panel of the gift box face down and gently slide the pulp tray containing the blender jar assembly out of the gift box. Remove the jar cover and measuring cup, then carefully lift the blender base and set aside.
    To assemble the blender, follow the Assembly Instructions on page 5 in this instruction booklet.
    Replace all packing materials in the box and save the box for repackaging.
    Before using it for the first time: Wash all parts according to the Cleaning and Maintenance section on page 6 of this booklet to remove any dust or residue.

FEATURES AND BENEFITSCuisinart SPB-650 1 HP Blender-1

  1. Cover
    Just press On. Tight-fitting seal resists leakage.
  2. Measured Pour Lid
    Allows you to measure and add ingredients without removing the cover.
  3. 56-oz. BPA-Free Tritan® Co-Polyester Jar Has a unique, sturdy, wide-mouth design.
  4. High-Quality Blade Assembly with Patented Stainless Steel Blades Strong enough for all blending tasks, including tough jobs like crushing ice and blending smoothies.
  5. Electronic Touchpad Controls
    • On/Off Button
      Turns blender on or off.
    • Low Button
      Choose Low speed to blend ingredients to desired consistency. Blue LED lights indicate which speed you are using.
    • High Button
      Choose High speed to blend ingredients to desired consistency. Blue LED lights indicate which speed you are using.
    • Pre-Programmed Ice Crush Button
      Press Ice Crush to begin crushing. The blender will cycle through a pre-programmed function and stop when finished.
    • Pre-Programmed Smoothie Function
      Speed is specifically designed to blend a variety of ingredients into a perfect smoothie.
      The blender will cycle through a pre-programmed function and stop when finished.
    • Pulse Button
      Allows you to pulse ingredients on High or Low so you can blend as much as needed.
  6. Powerful Motor Base
    Plenty of power to handle a wide variety of blending tasks.
  7. Slip-Proof Feet
    Prevent movement during use and prevent damaging marks on countertops or tables.
  8. Cord Storage (not shown)
    Keeps countertop safe and neat by conveniently storing excess cord.
    Note: Tritan is a registered trademark of Eastman Chemical Company.

ASSEMBLY

To use your Cuisinart® VELOCITY Ultra 1HP Blender, begin by assembling the blender jar.

  1. Turn the blender jar (a) upside down and place it flat on a sturdy surface.
    Note: You may need to position the rubber gasket (b) into the groove of the blade assembly if not tightly in place
  2. Turn the blade assembly (c) upside down and place the blade end in the blender jar opening.
    Note: Blades are sharp. Handle carefully.
  3. Twist blade assembly (c) clockwise until secure.

HELPFUL REMINDERS

  • Once the cover is in position, additional ingredients can be added during blending by simply lifting the measured pour lid, adding ingredients and replacing the measured pour lid.
  • Cover should always be in place while the unit is on.
  • Warning: Do not place blender jar on base while motor is running.
  • Do not remove blade assembly from blender jar when removing blender jar from base. Simply lift blender jar from motor base.
  • Never put boiling liquids or solid frozen foods (with the exception of ice cubes or ½-inch [1.3 cm] pieces of frozen fruit) in the blender jar.
  • Do not put ice, frozen foods or very cold liquids into a blender jar that has come directly out of a hot dishwasher.
  • Do not put very hot liquids or foods into a blender jar that has come directly out of the freezer. Cool boiling liquids for 5 minutes before pouring into blender jar.
  • Follow Cleaning and Maintenance instructions on page 6 prior to your first use.

OPERATION

  1. Place the motor base of your Cuisinart® VELOCITY Ultra 1HP Blender on a flat, sturdy surface. It is important that the surface be clean and dry. Assemble the blender jar by following the Assembly instructions. Once the jar is assembled and is in position on the motor base, plug the unit into an electrical outlet.
  2. Put all necessary ingredients into the blender jar and replace the cover. You may add more ingredients by lifting the measured pour lid and dropping ingredients through the fill area. Replace the measured pour lid after adding ingredients. Do not put hands into blender jar with blender plugged in.
    Note: Add liquid ingredients first, then follow with solid ingredients. This will provide more consistent blending and prevent unnecessary stress on the motor.
    Note: To remove blender jar cover, lift edge of cover upward. Lifting measured pour lid will not remove cover.
  3. Start blending:
    Press the On/Off button. The red LED indicator light will illuminate and flash, indicating that the blender is turned on, but no speed has been selected.
  4. Choose blending action:
    • If selecting a blending speed, press Low or High button to determine the speed at which you would like to blend the ingredients. Both the On indicator light and the activated speed indicator lights will glow. The blender will now be functioning at the desired speed.
    • If selecting a pre-programmed function, press the Ice Crush or Smoothie button to determine the function you would like to blend the ingredients. Both the On indicator light and the activated pre-programmed indicator lights will glow. The blender will now be functioning at the desired pre-programmed function. The blender will stop running once the pre-programmed function times out and completes the blending cycle.
    • If selecting Pulse mode you can create a burst of power for quick, efficient blending. To use the Pulse function, push the Pulse button and the blue Pulse LED indicator light will blink. Press and release either the Low or High buttons. Repeat as desired. You determine the duration of each pulse. While pulsing, the blue LED indicator light will glow. The Pulse function can be used to break apar larger pieces of food or to control the texture
      of food when chopping. The Pulse function is also effective in starting the blending process when you do not want continuous power or when processing items that do not require an extended amount of blending.
      WARNING: FLASHING RED LIGHT INDICATES READY TO OPERATE. DO NOT TOUCH BLADES.
  5. To pause or stop blending process:
    • To pause blending process:
      Push the button corresponding to the speed at which you are currently blending.
      For example: If you are blending on High speed, push the High speed button and the blender will stop blending, but the unit will remain on.
    • To stop blending process:
      Push the On/Off button when you are finished with your recipe and would like to turn the blender off.
    • To prevent excessive stress to the motor:
      Your blender incorporates an auto-stop feature. After running continuously for two minutes, the blender will automatically revert to Standby mode. To continue blending, press the desired function.
      To dislodge food: Be sure blender is off. Use a rubber or plastic spatula to help remove food lodged around the removable blade assembly. Replace the cover and measured pour lid and turn blender back on and continue blending, if necessary. Make sure spatula is not inside the blender jar before blending.
      To reset the unit: This appliance features an advanced, resettable thermal device. In the event of an overload condition, the unit will shut down to protect the motor from overheating. To reset the appliance when this happens, unplug the unit and let it cool for a minimum of 15 minutes. Then, reduce the contents of the blender jar and/or clear any jams. Restart the unit as noted in the operating directions.
      When finished blending: Press the On/Off button and unplug the blender from the electrical outlet. Never remove the blender jar from the motor base until the blender is off. Do not remove blade assembly from blender jar when removing jar from motor base. Simply lift blender jar from motor base. Do not put hands into blender jar with blender plugged in.

CLEANING AND MAINTENANCE

Always unplug your Cuisinart® VELOCITY Ultra 1HP Blender from the electrical outlet before cleaning.
The blender is made of corrosion-resistant parts that are easy to clean. Before first use and after every use, clean each part thoroughly. Periodically check all parts before reassembly. If any part is damaged or blender jar is chipped or cracked, DO NOT USE BLENDER.
Remove the blender jar from the motor base by lifting straight up and away. Remove blade assembly by turning counterclockwise.
Remove the blade assembly. Wash in warm, soapy water, rinse and dry thoroughly.
CAUTION: Handle the blade assembly carefully. It is SHARP and may cause injury. Do not attempt to remove blades from assembly.
Remove the blender jar cover and the measured pour lid. Wash in warm, soapy water; rinse and dry thoroughly or place in upper rack of dishwasher. The blender jar must be washed in warm, soapy water and rinsed and dried thoroughly. The blender jar can also be placed upside down in dishwasher. Finally, wipe the motor base clean with a damp cloth to remove any residue and dry thoroughly. Never submerge the motor base in water or other liquids, or place in a dishwasher.
Tip: You may wish to clean your blender blade assembly as follows: Squirt a small amount of dishwashing liquid into assembled blender jar and 1 cup of warm water. Run on Low or High for 15 to 30 seconds. Repeat, using clean tap water. Rinse and dry all parts thoroughly.
Any other servicing should be performed by an authorized service representative.

DOs and DON’Ts
WHEN USING YOUR BLENDER

Do:

  • Make sure the electrical outlet is rated at the same voltage as that stated on the bottom of the blender motor base.
  • Always use the blender on a clean, sturdy and dry surface.
  • Always add liquid ingredients to the blender jar first, then add remaining ingredients. This will ensure that ingredients are uniformly mixed.
  • Cut most foods into cubes approximately 1 inch (2.5 cm) to achieve a more uniform result. Cut all cheeses into pieces no larger than ½ inch (1.3 cm).
  • Use the measured pour lid to measure liquid ingredients such as alcohol. Replace measured pour lid after ingredients have been added.
  • Use a rubber or plastic spatula as needed, only when the blender is turned off. Never use metal utensils, as damage may occur to the blender jar or blade assembly.
  • Place cover on firmly. Always operate the blender with the cover on.
  • Make sure removable blade assembly is tightly attached to blender jar.
  • Always remove blade assembly before cleaning.
  • When scraping the blender jar with a spatula, remove the food from the sides of the blender jar and place food in the center of the blender jar, over the blade assembly.
  • When chopping fresh herbs, garlic, onion, zest, breadcrumbs, nuts, etc., make sure the blender jar and blade assembly are completely dry.
  • If food tends to stick to the sides of the blender jar when blending, pulse in short bursts.
  • Pulses should be short bursts. Space the pulses so the blades stop rotating between pulses, about 1-2 seconds.

Don’t:

  • Don’t store food or liquids in the blender jar.
  • Don’t place blade assembly on motor base without the blender jar attached.
  • Don’t attempt to mash potatoes, knead heavy dough or beat egg whites.
  • Don’t remove blender jar while unit is on. Keep the blender jar cover on the blender jar while blending.
  • Don’t twist removable blade assembly from blender jar when removing blender jar from motor base. Simply lift blender jar from motor base.
  • Don’t overload blender. If the motor stalls, turn the blender off immediately, unplug the unit and remove a portion of the food, then continue.
  • Don’t use any utensil inside the blender jar while the motor is on.
  • Don’t use any container or accessories not recommended by Cuisinart. Doing so may result in injury.
  • Don’t put hands inside the blender jar when blender is plugged in.
  • Don’t add boiling liquids or frozen foods (except ice cubes or ½-inch pieces of frozen fruit) to blender jar. Boiling liquids should cool for 5 minutes before being poured into blender jar.
  • Don’t run blender when jar is empty.

WARRANTY

LIMITED THREE-YEAR WARRANTY

This warranty is available to U.S. consumers only. This warranty supersedes all previous warranties on the Cuisinart® VELOCITY Ultra 1HP Blender. You are a consumer if you own a Cuisinart® VELOCITY Ultra 1HP Blender that was purchased at retail for personal, family or household use. Except as otherwise required under applicable state law, this warranty is not available to retailers or other commercial purchasers or owners. We warrant that your Cuisinart® VELOCITY Ultra 1HP Blender will be free of defects in material or workmanship under normal home use for three years from the date of original purchase. We recommend that you visit our website, www.cuisinart.com for the fastest, most efficient way to complete your product registration. However, product registration online does not eliminate the need for the consumer to maintain the original proof of purchase in order to obtain the warranty benefits. In the event that you do not have proof of purchase date, the purchase date for purposes of this warranty will be the date of manufacture.
If your blender should prove to be defective within the warranty period, we will repair it or, if we think necessary, replace it. To obtain warranty service, please call our Consumer Service Center toll-free at 1-800-726-0190 or write to: Cuisinart, 7475 North Glen Harbor Blvd., Glendale, AZ 85307.
To facilitate the speed and accuracy of your return, please enclose $10.00 for shipping and handling of the product. Be sure to include a return address, daytime phone number, description of the product defect, product serial number (stamped on bottom of product base) and any other information pertinent to the product’s return. Please pay by check or money order. (California residents need only supply proof of purchase and should call 1-800-726-0190 for shipping instructions.)
NOTE: For added protection and secure handling of any Cuisinart product that is being returned, we recommend you use a traceable, insured delivery service. Cuisinart cannot be held responsible for in-transit damage or for packages that are not delivered to us. Lost and/or damaged products are not covered under warranty.
CALIFORNIA RESIDENTS ONLY
California law provides that for In-Warranty Service, California residents have the option of returning a nonconforming product (A) to the store where it was purchased or (B) to another retail store that sells Cuisinart products of the same type. The retail store shall then, according to its preferences, either repair the product, refer the consumer to an independent repair facility, replace the product or refund the purchase price less the amount directly attributable to the consumer’s prior usage of the product. If either of the above two options does not result in the appropriate relief to the consumer, the consumer may then take the product to an independent repair facility if service or repair can be economically accomplished.
Cuisinart and not the consumer will be responsible for the reasonable cost of such service, repair, replacement or refund for nonconforming products under warranty.
California residents may also, at their preference, return nonconforming products directly to Cuisinart for repair or, if necessary, replacement by calling our Consumer Service Center toll-free at 1-800-726- 0190. Cuisinart will be responsible for the cost of the repair, replacement and shipping and handling for such nonconforming products under warranty.
BEFORE RETURNING YOUR CUISINART PRODUCT
If you are experiencing problems with your Cuisinart product, we suggest that you call our Consumer Service Center at 1-800-726-0190 before returning the product for servicing. Often, our Consumer Service Representatives can help solve the problem without having the product serviced. If servicing is needed, a representative can confirm whether the product is under warranty and direct you to the nearest service location.
Your Cuisinart® VELOCITY Ultra 1HP Blender has been manufactured to the strictest specifications and has been designed for use only in 120 volt outlets and only with authorized accessories and replacement parts. This warranty expressly excludes any defects or damages caused by attempted use of this unit with a converter, as well as use with accessories, replacement parts or repair service other than those authorized by Cuisinart. This warranty does not cover any damage caused by accident, misuse, shipment or other than ordinary household use. This warranty excludes all incidental or consequential damages. Some states do not allow the exclusion or limitation of these damages, so these exclusions may not apply to you. You may also have other rights, which vary from state to state.
Important: If the nonconforming product is to be serviced by someone other than Cuisinart’s Authorized Service Center, please remind the servicer to call our Consumer Service Center at 1-800- 726-0190 to ensure that the problem is properly diagnosed, the product is serviced with the correct parts and to ensure that the product is still under warranty.

RECIPE TIPS

The simple recipes that follow include some old Cuisinart favorites as well as some creative combinations that are sure to please your friends and family. Thanks to the superior ice-crushing power of the VELOCITY Ultra 1HP Blender, you’ll also be able to make delicious frozen drinks.
Chopping Nuts
Put ½ cup shelled nuts into the blender jar and cover blender. Pulse on Low or High until desired chop is achieved. Pulse fewer times for coarsely chopped nuts. For best results, process small amounts, ½ cup or less.
Bread, Cookie or Cracker Crumbs
Break or cut bread, cookies or crackers into pieces ½ inch or less in size. For best bread results, use day-old bread (drier bread works best). Put bread, cookie or cracker pieces in blender jar. Set on Low or High and pulse to chop, then run continuously until desired texture of crumbs is achieved. For best results, process 1 cup or less at a time.
Crushing Ice
Put up to 12 standard ice cubes into the blender jar. Cover. Press the Ice Crush button for perfect, snowlike results, For coarser results, pulse on High using short bursts.
Grating Fresh Citrus Zest
For best results, blender jar and cutting assembly must be clean and dry. Remove zest from fruit in strips using a vegetable peeler; use a sharp knife to remove the bitter white pith from the underside of the zest. Process no more than 8 strips at a time (zest of 1 medium lemon). Cut strips in half. Put strips and 1 teaspoon sugar or coarse salt (from recipe) into theblender jar. Cover blender jar. Run on Low for 15 to 20 seconds.
Baby Food
Combine ½ cup cooked vegetables, fruit or meat with 3 to 4 tablespoons liquid (water, milk, fruit juice, broth or cooking liquid) in the blender jar. Run on Low for 15 to 20 seconds until a smooth purée is reached. Add more liquid as necessary and process further until desired texture is reached. Always consult with your pediatrician/family physician concerning the best foods for your baby and when to introduce new foods to his/her diet.
Grinding Hard Cheese
Cut cheese into ½-inch pieces; remove all outer hard rind. Put cheese into blender jar. Pulse on Low to chop cheese, 10 to 12 times, then run until desired grind is reached. For best results, grind no more than 3 ounces of cheese at a time.
Whipping Cream
If possible, chill blender jar and cutting assembly in refrigerator for 15 minutes. Put 1 cup heavy or whipping cream into blender jar. Cover jar. Pulse on Low 20 to 30 times until cream is thickened. (Do not overblend – bits of butter will begin to form.) If desired, add 1 tablespoon sugar and 1 to 2 teaspoons of vanilla or other flavoring. Consistency will be that of a thickened, but not fluffy whipped cream, and is most appropriate for topping desserts or coffee drinks.
When using the blender to purée hot mixtures such as creamed soups and baby foods, strain the solids from the liquid, reserving the cooking liquid. Then put ½ to 1 cup of the reserved cooking liquid into the blender jar along with the cooked solids. Blend on Low until desired consistency/purée is reached. Allow hot foods to cool slightly before blending to prevent steam buildup, which may cause the lid to lift up from the blender jar. When blending hot foods hold lid down with a dish towel in hand to hold the lid in place.
Keep your blender out on the counter within easy reach, and you will be surprised how often you will use it.
Keep ice cubes made of juices, yogurt, milk or fruit purées on hand to substitute for plain ice when making smoothies and frosty beverages to prevent diluting the drink.
For quick cleaning, add 1 cup of warm water and a drop of liquid dish soap to the blender jar. Cover and run on Low or High for 15 to 30 seconds, or more as needed. Discard the soapy water and rinse blender thoroughly before the next use.

FAQS

What kind of nonstick interior does it have? do not want Teflon

Teflon is a whole group of products. What was banned was the use of perfluorooctanoic acid (PFOA), which used to be one of the main chemicals found in the version of Teflon used for cookware. It was banned not banned that many years ago – Europe in 2008 and USA in 2014 (the same year as a couple of the answers to this question). So the current version of this product should not contain a version of Teflon that contains PFOA, but might contain a different coating formula that’s still under the brand name Teflon.
I checked the current product manual for CFO-3SS on the Cuisinart website, and it just says nonstick without identifying the coating. Also it says copyright 2013, so that’s not great.

This says it is dishwasher safe. Does the pot pop off the base (which has the plug attached for the power cord) or the base go in the dishwasher too?

The plug attachment comes off. The base is part of the pot and it all definitely goes in the dishwasher. Best fondue pot ever because of that.
By Marcy K. on January 28, 2019

Is the pot/stand pretty sturdy? I have young kids and am worried about a pot that tips over easily. Thank you in advance!

It is! We use it with 8 and 10-year-olds. And never any issues. I highly recommend

How long is the cord?

Unless you plan on eating on the floor this was a waste. The family had to stare at the wall while eating fondue the cord is literally 20 inches long I couldn’t believe I spent over 70$ and can’t even use an extension cord

Does the outside get hot to the touch while making fondue?

Yes

what is its voltage? 110 or 220?

We gave it as a gift but I am almost sure it is 110

can i use it for hot oil?

Yes I always have an oil and cheese fondue. This pot works great.

how long does it stay at a liquid temp without the cord ? will my chocolate harden up right away? does it have to stay plugged in?

It will stay melted for approximately 35-45 minutes.

How much volume does it hold?

3 qts.

how do you clean it? Does the pot detach for cleaning?

we fill the pot with warm water and and Palmolive or similar dish detergent liquid, and clean the interior with a brush. After that we rinse the pot wit fresh water two or thres times and that’s it.

Why does this say Prime, but it will take 3 or more weeks to be delivered?

Prime simply means that ONCE THE ITEM SHIPS it will only take a day or two. It can takes weeks (or even months) for an item to come in stock so that they can ship it.

Is the bowl able to be separated from the stand?

Yes it is. It makes clean up easy.

can I buy replacement forks through Cuisinart? they are not offered on Amazon?

I’m not sure about going through Cuisinart. I found a set of fondue forks at a local kitchen gadget store a few years ago when I needed more for a party.

Can you melt carmel for dipping apples and stuff?

Yes, according to the product description many food ingredients can be melted.,

Has anyone ever had an issue using an extension cord?

No. Just make sure you have a good extension cord that is thick so it will not heat up.

VIDEO

References

Leave a comment

Your email address will not be published. Required fields are marked *