ASSEMBLY INSTRUCTIONS
TLCFLS-6001
TLCFLS-6002CHANDELIER
TLCFLS-6001 Farmhouse Rustic Chandelier
Notice:
- Follow the installation instructions. Please confirm all accessories are present before installation.
- Do not fully tighten the screws during initial assembly. Fully tighten screws only once all pieces which are correctly assembled.
- If you encounter any problems during installation, please contact our customer service.
Part list
Installation
Step 1: Remove the flat screw (J) from ceiling metal panels (H ) . Then attach the fixed metal plate (C) to the outlet box with the mounting screws (J). The one marked GND must face outwards.
Step 2: Cut the length of wire when needed. The remaining wire will be at least 6″ long measured from the top of the Ceiling metal panels (H). Step 3: Pay attention to connecting the wires. Be sure to differentiate between positive and negative points. Positive to positive, negative to negative, and ground to ground.Step 4: Install two loops(K) on the ceiling metal plates (H) tightly.
Step 5: Screw ceiling metal panel(H) on the fixed metal plate(C) by 4pcs flat screws(I) tightly.
Step 6: Screw rods(M) on the shade(N), tighten the rods by the loop(K).
Step 7: Screw rods(M) on the shade(N), tighten the rods by the loop(K).
Step 8: Install bulbs. (Bulbs not included).Note: It can be used as the ceiling lamp without the chain (L)
CONTACT US:
If you have any questions about the installation of YITAHOME® products, just contact us at +1(888)-717-8084 from Mon-Fri 8:00 AM-16:30 PM PST / Saturday 8:00 AM-12:00 PMPST or E-mail us at: after-sale.cs@hotmail.com
Alternative method to contact us(amazon.com orders only)
- Log into your amazon account
- Go to “Your Orders” and find the purchase
- Click on “Contact Seller”
Documents / Resources
YITAHOME TLCFLS-6001 Farmhouse Rustic Chandelier [pdf] Instruction Manual TLCFLS-6001 Farmhouse Rustic Chandelier, TLCFLS-6001, Farmhouse Rustic Chandelier, Rustic Chandelier, Chandelier |