Canon -Color- image-CLASS- MF753Cdw- Multifunction- Wireless- Color- Laser- Printer - logo

Canon Color imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer

Canon -Color- image-CLASS- MF753Cdw- Multifunction- Wireless- Color- Laser- Printer - product

Product Information

The product is a machine manufactured by Canon. It is important to read the user manual before using the machine to ensure proper usage and prevent injury or damage to property. The machine can be installed in a suitable location, and precautions should be followed for safe installation. The online manual site (https://oip.manual.canon/) provides additional information on this machine.

Important Safety Instructions

This chapter provides important safety instructions for the prevention of injury to users of this machine and others, and damage to property. Read this chapter before using the machine and follow the instructions to ensure that you use the machine properly. The Canon online manual site (https://oip.manual.canon/) also provides information on this machine. Read this information also to ensure correct use.
Do not perform any operations not described in this manual. Canon will not be responsible for any damages resulting from operations not described in this manual, improper use, or repairs or modifications not performed by Canon or a third party authorized by Canon.

WARNING
Indicates a warning concerning operations that may lead to death or serious personal injury if not performed correctly. To ensure that you use the machine safely, always observe these warnings.

CAUTION
Indicates a precaution for preventing the risk of personal injury or property damage other than a product fault due to improper use of the machine. To ensure that you use the machine safely, always observe these cautions.

IMPORTANT
Indicates important operational requirements and restrictions that should always be observed when using this machine. Always observe these important items to avoid malfunctions, faults or property damage due to improper machine operation.

Installation

To ensure that you use this machine safely, read the following precautions carefully before installing the machine in a suitable location.

WARNING
Do not install in the locations listed below Doing so may result in a fire or electric shock.

  • Locations that risk blocking the ventilation slots (too close to walls or curtains or on materials such as deep-pile carpets)
  • Damp or dusty locations
  • Near heating appliances or open flames
  • Near alcohol, paint thinners or other flammable substances

Do not use a wireless LAN close to medical equipment (only for products with a wireless LAN function)
Radio waves can interfere with medical equipment and cause malfunctions that may lead to accidents.

CAUTION
Do not install in the locations listed below Doing so could result in a fault or adversely affect people or other equipment.

  • Outdoors or in locations exposed to direct sunlight
  • Locations subject to temperature and humidity extremes, whether low or high
  • Locations subject to dramatic changes in temperature or humidity
  • Near equipment that generates magnetic or electromagnetic waves
  • Near electronic devices or precision equipment, such as TVs, radios and computers
  • Laboratories or other locations where chemical reactions occur
  • Locations heavily exposed to aerosol sprays, ammonia or other corrosive gases
  • Locations subject to instability or vibration
  • Surfaces that may warp under the weight of the machine or into which the machine is liable to sink (carpets, straw matting, beds, etc.)
  • Locations where air ventilated from the machine directly impacts people

Use the correct method when moving this machine
Using incorrect methods to move this machine may result in injury.

  • Carry this machine correctly according to the instructions in the manual.
  • Position this machine slowly and carefully to avoid getting your hands caught between the machine and the floor or walls.

Provide adequate ventilation during use
This machine generates small amounts of ozone and other emissions during normal use. These amounts are too low to be harmful to humans. However, poorly ventilated rooms should be adequately ventilated during extended use or long print runs.

IMPORTANT
When using a wireless LAN (only for products with a wireless LAN function)

  • Install the machine no more than 54 yards (50 meters) from the wireless LAN router.
  • As much as possible, install in a location where communication is not blocked by intervening objects. The signal may be degraded when passing through walls or floors.
  • Install the machine as far as possible from digital cordless phones, microwave ovens or other equipment that emits radio waves.

Connecting the telephone line (only for machines that support faxes)
In certain circumstances, this machine may not be able to communicate via some telephone lines or in some regions. One such example is when the total resistance of the telephone line and the machine exceeds 1700Ω. In this event, contact your dealer or service representative.

  • This machine conforms to an analog telephone line standard and can only be connected to ordinary subscriber telephone lines. Connecting the machine to a business line or other dedicated line may result in faults. Always check the line before connecting.

Power Supply

WARNING
Using the power plug and cord correctly Improper use may result in a fire or electric shock.

  • Check that the power supply used for the machine is safe and has a stable voltage.
  • Use only a power supply that meets the specified voltage requirements.
  • Connect the machine to a securely grounded power outlet using the power cord provided.
  • Do not use power cords other than the cord provided.
  • The power cord provided should only be used with this machine.
  • If you plug this machine into a power outlet with multiple sockets, do not use the remaining sockets to connect other devices.
  • Do not use extension cords.
  • Run the power cord so as to avoid any risk of tripping over the cord.
  • Do not modify, pull, unduly bend or otherwise damage the power cord.
  • Do not place heavy objects on the power cord.
  • Do not bundle the power cord or tie it in a knot.
  • Do not run the power cord close to a heating appliance.
  • Do not plug in and unplug the power connector frequently.
  • Do not subject the power connector to strong impacts.
  • Plug the power plug fully into the power outlet, ensuring that it is securely inserted.
  • Do not touch the machine during a thunderstorm.
  • Do not plug in or unplug the power plug with wet hands.
  • During holidays or other times when the machine will not be used for long periods, turn the machine off and unplug it from the power supply.

IMPORTANT

  • Install this machine near the power outlet and leave sufficient space around the power plug so that it can be quickly unplugged in an emergency.
  • Always ensure that the power plug is unplugged from the power outlet before starting work.
  • Do not connect the power cord to an uninterruptible power supply. Doing so may result in a malfunction or fault if a power failure occurs.
  • Do not connect the power cord to the auxiliary power outlet on a computer.
  • We recommend using a power outlet wired via a household earth-leakage circuit breaker.
  • Electrical noise may cause this machine to malfunction or lose data.
  • When reconnecting the power cord after disconnecting it, wait at least 5 seconds before reconnection.
  • A voltage drop that exceeds the permitted range may result in a malfunction or loss of data in the machine and any connected computers.
  • For information on your power supply, contact your power supplier or your local electrical appliances store.

Handling

WARNING
Observe the following
Improper handling may lead to a fire, electric shock or burns.

  • If the machine makes an unusual noise, emits an unusual smell, emits smoke or excessive heat, or if any parts are damaged, immediately unplug the machine from the power outlet and contact your dealer or service representative.
  • Do not disassemble or modify this machine.
  • Place the machine such that the power cord and other cables and the gears and electrical parts inside the machine are well out of the reach of children.
  • Do not place jewelry or other metal objects or containers filled with liquid on the machine.
  • Do not use flammable sprays near this machine.
  • When moving this machine, always turn the machine off at the power switch, unplug the machine from the power outlet and then disconnect the power cord and interface cables.
  • When connecting or disconnecting a USB cable while the machine is still plugged into a power outlet, do not touch the metal part of the connector.
  • Do not connect unapproved products to ports on this machine (power outlet, connector ports, etc.).
  • When installing or removing optional products, always turn this machine off at the power switch, unplug the machine from the power outlet and then disconnect the power cord and interface cables.

Cleaning and maintaining this machine
Improper cleaning may result in machine malfunctions, fire, electric shock or static electricity.

  • You should clean this machine regularly.
  • Before cleaning, always turn the machine off and unplug it from the power outlet.
  • Unplug the power plug periodically and wipe the machine with a dry cloth to remove dust and grime.
  • Clean the machine using a cloth moistened with water and then thoroughly wrung out. Do not use alcohol, benzene, paint thinners or other flammable substances and do not use tissue paper or paper towels.
  • Regularly check the machine for overheating, rusting, dents, scratches and cracks.

Users of cardiac pacemakers
This machine and its toner cartridges emit low levels of magnetism and ultrasonic waves. If you use a cardiac pacemaker and experience any abnormalities, move away from the machine and consult your physician.

CAUTION
Take care not to drop heavy objects, on the platen glass
Doing so may damage the platen glass and result in injury.
Do not attempt to carry the machine with the paper drawers or optional products (paper feeder) installed
Doing so risks parts being dropped and causing injury.

Canon -Color- image-CLASS- MF753Cdw- Multifunction- Wireless- Color- Laser- Printer - 12

Observe the following
Failure to do so may result in injury, faults or paper jams.

  • Do not place heavy objects on this machine.
  • Take care not to trap your hands when using parts that open and close.
  • To avoid your hands or fingers being trapped, do not touch the paper eject rollers.
  • Take care to avoid cutting your hands or fingers on paper or machine parts when replenishing the paper or clearing paper jams.
  • Do not subject the machine to strong impacts or shaking.
  • Do not use undue force when opening and closing doors, covers or drawers, etc. on the machine.
  • Do not turn this machine off while it is printing.
  • Do not open and close any covers, or remove or add paper while the machine is running.
  • Do not put your hands inside the machine unless absolutely necessary.

Move or re-install the machine as instructed in the User’s Guide
When relocating or re-installing a previously installed machine, do so in accordance with the instructions in the User’s Guide.

Using the feeders correctly
Improper use may result in injury.

  • When making copies of items such as thick books on the platen glass, do not press down hard enough to damage the feeder.
  • Close the feeder slowly.
  • Do not slide your hand or fingers fully into the feeder.

Canon -Color- image-CLASS- MF753Cdw- Multifunction- Wireless- Color- Laser- Printer - 13

Do not put your hand into the machine while the paper drawers are removed (only for machines with paper drawers installed)
Doing so may result in injury.
Do not touch high-temperature or high-voltage components
Doing so may result in burns or other injury.

  • Do not touch parts of the machine other than those specified in the manual.
  • Immediately after use, the inside of the machine and the paper eject slots are hot and should not be touched.
  • Printed paper may become hot during continuous printing and should be handled with care.

Canon -Color- image-CLASS- MF753Cdw- Multifunction- Wireless- Color- Laser- Printer - 14

Safety-related Symbols

The product uses various symbols to convey important safety information:
The following symbols are used on this product:

  • Canon -Color- image-CLASS- MF753Cdw- Multifunction- Wireless- Color- Laser- Printer - 01Power switch (On)
  • Canon -Color- image-CLASS- MF753Cdw- Multifunction- Wireless- Color- Laser- Printer - 02Power switch (Off )
  • Canon -Color- image-CLASS- MF753Cdw- Multifunction- Wireless- Color- Laser- Printer - 03Power switch (Stand-by)
  • Canon -Color- image-CLASS- MF753Cdw- Multifunction- Wireless- Color- Laser- Printer - 04Push-button switch (On /Off )
  • Canon -Color- image-CLASS- MF753Cdw- Multifunction- Wireless- Color- Laser- Printer - 05Protective earthing terminal Electric shock warning: Hazardous voltage inside. Do not remove the cover.
  • Canon -Color- image-CLASS- MF753Cdw- Multifunction- Wireless- Color- Laser- Printer - 06High temperature warning. Do not touch.
  • Canon -Color- image-CLASS- MF753Cdw- Multifunction- Wireless- Color- Laser- Printer - 08Class II equipment
  • Canon -Color- image-CLASS- MF753Cdw- Multifunction- Wireless- Color- Laser- Printer - 09Contains moving parts. Keep hands and other body parts away from moving parts.
  • Canon -Color- image-CLASS- MF753Cdw- Multifunction- Wireless- Color- Laser- Printer - 10Electric shock warning: Unplug all power cords from the power outlet.
  • Canon -Color- image-CLASS- MF753Cdw- Multifunction- Wireless- Color- Laser- Printer - 11Sharp edges. Keep hands and other body parts away from sharp edges

NOTE
Some models may use other symbols not listed here.

Product Usage Instructions

Follow these instructions for proper usage of the machine:

  1. Read the user manual carefully before using the machine.
  2. Ensure the machine is installed in a suitable location where communication is not blocked.
  3. Do not perform any operations not described in the manual to avoid the risk of fire or electric shock.
  4. Avoid installing the machine close to cordless phones, microwave ovens, or other equipment that emits radio waves.
  5. If the machine supports faxes, ensure proper communication via telephone lines and avoid using a wireless LAN close to medical equipment.
  6. Contact your dealer or service if communication issues arise due to high resistance of the telephone line and the machine. Observe the safety-related symbols on the product and follow the provided warnings and precautions.

Remember to always prioritize safety and follow the instructions provided to prevent injury or damage while using the machine.

Standard / regulation

Product name
In some sales regions, this product may be registered under the names in parentheses ( ) below in accordance with local safety regulations.
imageCLASS MF753Cdw (F810102)
imageCLASS MF751Cdw (F810100)

Telephone Equipment

WARNING
When using telephone equipment, basic safety precautions should always be observed to reduce the risk of fire, electric shock or injury, including the following:

  1. Do not use this product near water, such as near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
  2. Avoid using a telephone during an electrical storm. There may be a slight risk of electric shock from lightning.
  3. Do not use the telephone to report a gas leak while in the vicinity of the leak.

FCC (Federal Communications Commission) Users in the U.S.A.

Multi Function Printer, Model F810102 / F810100 Contains Transmitter Module FCC ID: TLZ-NM333
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

[NOTE]
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines as this equipment has very low levels of RF energy. But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person’s body. Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in this manual. If you make such changes or modifications, you could be required to stop operation of the equipment.
CANON U.S.A., INC
One Canon Park, Melville, NY 11747, U.S.A.
TEL No. 1-800-OK-CANON

Regulatory information for users in Canada
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules as this equipment has very low levels of RF energy. But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person’s body.
The following applies in California, USA only:
The battery included with your product contains perchlorate material and may require special handling. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.

Users in the U.S.A.
Pre-Installation Requirements for Canon Facsimile Equipment

A. Location
Supply a suitable table, cabinet, or desk for the machine.

B. Order Information

  1. A single telephone line (touch-tone or rotary) should be used.
  2. Order an RJ11-C telephone wall jack (USOC), which should be installed by the telephone company. If the RJ11-C wall jack is not present, telephone/facsimile operation is not possible.
  3. Order a normal business line from your telephone company’s business representative. The line should be a regular voice grade line or an equivalent one. Use one line per unit.

DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Dial) line if you communicate overseas

NOTE
Canon recommends an individual line following industry standards, i.e.,2,500 (touch-tone) or 500 (rotary/pulse dial) telephones. A dedicated extension off a PBX (Private Branch eXchange) unit without “Call Waiting” can be used with your facsimile unit. Key telephone systems are not recommended because they send nonstandard signals to individual telephones for ringing and special codes, which may cause a facsimile error.

C. Power Requirements
The machine should be connected to a standard 120 volt AC, three wire grounded outlet only.
Do not connect this machine to an outlet or power line shared with other appliances that cause “electrical noise.” Air conditioners, electric typewriters, copiers, and machines of this sort generate electrical noise that often interferes with communications equipment and the sending and receiving of documents.

Connection of the Equipment
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the rear panel of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). An FCC compliant telephone line cable and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premise wiring using a compatible modular jack that is Part 68 compliant. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subjected to state tariffs.

In Case of Equipment Malfunction
Should any malfunction occur which cannot be corrected by the procedures described in the User’s Guide, disconnect the equipment from the telephone line cable and disconnect the power cord. The telephone line cable should not be reconnected or the power switch turned ON until the problem is completely resolved. Users should contact Canon Authorized Service Facilities for servicing of equipment, Information regarding Authorized Service Facility locations can be obtained by calling Canon Customer Care Center (1-800-OK-CANON).

Rights of the Telephone Company
If this equipment (image CLASS MF753Cdw / MF751Cdw) causes harm to the telephone network, the telephone company may temporarily disconnect service. The telephone company also retains the right to make changes in facilities and services that may affect the operation of this equipment. When such changes are necessary, the telephone company is required to give adequate prior notice to the user.
However, if advance notice is not possible, the telephone company will notify the customer as soon as possible. Also, the customer will be advised of his/her right to file a complaint with the FCC if he/she believes it is necessary.

WARNING
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including FAX machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long distance transmission charges.)

NOTE
In order to program this information into your machine, you should complete the procedure for registering your name, unit’s telephone number, time, and date in the User’s Guide.

Users in Canada
Pre-Installation Requirements for Canon Facsimile Equipment

A. Location
Supply a suitable table, cabinet, or desk for the machine. See the User’s Guide for specific dimensions and weight.

B. Order Information

  1. A single telephone line (touch-tone or rotary) should be used.
  2. Order a CA11A modular jack, which should be installed by the telephone company. If the CA11A jack is not present, installation cannot occur.
  3. Order a normal business line from your telephone company’s business representative. The line should be a regular voice grade line or an equivalent one. Use one line per unit.

DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Dial) line if you communicate overseas

NOTE
Canon recommends an individual line following industry standards, i.e., 2,500 (touch-tone) or 500 (rotary/pulse dial) telephones. A dedicated extension off a PBX (Private Branch exchange) unit without “Call Waiting” can be used with your facsimile unit. Key telephone systems are not recommended because they send nonstandard signals to individual telephones for ringing and special codes, which may cause a facsimile error.

C. Power Requirements
The power outlet should be a three-prong grounded receptacle (Single or Duplex). It should be independent from copiers, heaters, air conditioners, or any electric equipment that is thermostatically controlled. The rated value is 115 volts and 15 amperes. The CA11A modular jack should be relatively close to the power outlet to facilitate installation.

[Notice]

  • This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.
  • The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five.
  • Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the company’s inside wiring associated with a single line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions may not prevent deterioration of service in some situations.
  • The REN of this product is 1.0.
  • Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.
  • Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

CAUTION
Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.

NOTE
This equipment complies with the Canadian ICES-003 Class B limits.

WARNING
Observe the following laser-related precautions Any direct eye exposure to stray laser beams escaping the machine may be harmful to the eyes.

  • Never open covers other than those indicated in the instructions in the manual for this machine.
  • Never use controls, adjustments or operation procedures other than those stipulated in the manual as doing so could result in exposure to hazardous radiation.

IMPORTANT

  • This product is confirmed as a Class 1 laser product as defined in IEC60825-1:2014 and EN60825-1:2014.

CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL À LASER DE CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LÁSER DE CLASE 1
APARELHO A LASER DE CLASSE 1
LUOKAN 1 LASER-TUOTE
LASERPRODUKT KLASS 1
Laser beams can be harmful to humans. This machine is fitted with covers and an outer casing that blocks laser beams, so there is no risk of laser beams escaping the machine during normal use.

Laser Safety Caution

Canon -Color- image-CLASS- MF753Cdw- Multifunction- Wireless- Color- Laser- Printer - 15

Appendix

Legal Limitations on the Usage of Your Product and the Use of Images
Legal Limitations on the Use of Your Product and the Use of Images
Using your product to scan, print or otherwise reproduce certain documents, and the use of such images as scanned, printed or otherwise reproduced by your product, may be prohibited by law and may result in criminal and/or civil liability. A non-exhaustive list of these documents is set forth below. This list is intended to be a guide only. If you are uncertain about the legality of using your product to scan, print or otherwise reproduce any particular document and/or of the use of the images scanned, printed or otherwise reproduced, you should consult your legal advisor for guidance beforehand.

  • Paper Money
  • Travelers Checks
  • Money Orders
  • Food Stamps
  • Certificates of Deposit
  • Passports
  • Postage Stamps (canceled or uncanceled)
  • Immigration Papers
  • Identifying Badges or Insignias
  • Internal Revenue Stamps (canceled or uncanceled)
  • Selective Service or Draft Papers
  • Bonds or Other Certificates of Indebtedness
  • Checks or Drafts Issued by Governmental Agencies
  • Stock Certificates
  • Motor Vehicle Licenses and Certificates of Title
  • Copyrighted Works/Works of Art without Permission of Copyright Owner

Consumables

WARNING
Observe the following precautions when handling consumables
Improper handling may lead to burns or a fire.

  • Do not throw toner cartridges into an open flame.
  • Do not store toner cartridges, or paper in locations exposed to an open flame.
  • If you accidentally spill or scatter toner, carefully sweep up the toner particles or wipe them up with a damp cloth in a way that prevents inhalation. Do not use an ordinary vacuum cleaner to clean up spilled toner. Only models with safeguards against dust explosions should be used.

CAUTION
Observe the following precautions when handling consumables
Improper handling may result in burns or be harmful to your health. If any toner is ingested or gets into your eyes or mouth, consult a physician immediately.

  • Keep toner and other consumables out of the reach of small children.
  • Do not disassemble toner cartridges or other consumables.
  • If toner leaks from a toner cartridge, take care not to ingest the toner or allow it to directly touch your skin. If you get toner on your skin, wash it off with soap and cold water. If any irritation persists after washing, consult a physician immediately.

IMPORTANT

  • When performing tasks such as removing jammed paper or replacing toner or other consumables, take care not to get any toner on your hands or clothing.
  • If toner gets on your clothing or hands, immediately wash the affected area with cold water. Washing with hot water may fix the toner and result in permanent staining.

About This Manual

Screens & Illustrations
Unless otherwise stated, the screens and illustrations used in this manual are for the image CLASS MF753Cdw.

Trademarks

  • QR Code is a trademark of DENSO WAVE INCORPORATED.
  • All brand names and product names appearing on this document are registered trademarks or trademarks of their respective owners.

Disclaimers

  • The information in this document is subject to change without notice.
  • CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MANUAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS STIPULATED HEREIN, INCLUDING WITHOUT LIMITATION THEREOF WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE, OR NON-INFRINGEMENT OF PATENT RIGHTS. CANON INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, NOR FOR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MANUAL.
  • If you are unable to view the manual in PDF format, download Adobe Acrobat Reader from the Adobe Systems website (https://get.adobe.com/reader/).

Copyright
Unauthorized reproduction of the contents of this document in whole or in part is prohibited.

Third Party Software

This Canon product (the “PRODUCT”) includes third-party software modules. Use and distribution of these software modules, including any updates of such software modules (collectively, the “SOFTWARE”) are subject to license conditions below.

  1. You agree that you will comply with any applicable export control laws, restrictions or regulations of the countries involved in the event that the PRODUCT including the SOFTWARE is shipped, transferred or exported into any country.
  2. Rights holders of the SOFTWARE retain in all respects the title, ownership and intellectual property rights in and to the SOFTWARE. Except as expressly provided herein, no license or right, expressed or implied, is hereby conveyed or granted by rights holders of the SOFTWARE to you for any intellectual property of rights holders of the SOFTWARE.
  3. You may use the SOFTWARE solely for use with the PRODUCT.
  4. You may not assign, sublicense, market, distribute, or transfer the SOFTWARE to any third party without prior written consent of rights holders of the SOFTWARE.
  5. Notwithstanding the foregoing, you may transfer the SOFTWARE only when (a) you assign to a transferee all of your rights to the PRODUCT and all rights and obligations under the conditions governing the SOFTWARE and PRODUCT and (b) such transferee agrees in writing to be bound by all these conditions.
  6. You may not decrypt, decompile, reverse engineer, disassemble or otherwise reduce the code of the SOFTWARE to human readable form.
  7. You may not modify, adapt, translate, rent, lease or loan the SOFTWARE or create derivative works based on the SOFTWARE.
  8. You are not entitled to remove or make separate copies of the SOFTWARE from the PRODUCT.
  9. The human-readable portion (the source code) of the SOFTWARE is not licensed to you.

Notwithstanding (1) through (9) above, the PRODUCT includes third-party software modules accompanying the other license conditions, and these software modules are subject to the other license conditions. Please refer to the other license conditions of third-party software modules described in Appendix of Manual for the corresponding the PRODUCT. This Manual is available at https://oip.manual.canon/.
By using the PRODUCT, you shall be deemed to have agreed to all applicable license conditions. If you do not agree to these license conditions, please contact your service representative.
ACCEPTANCE
THE TERMS OF THIS THIRD PARTY SOFTWARE STATED HERE OR IN RELATED WARRANTY PROVISIONS SHALL BE DEEMED ACCEPTED UPON YOUR USE OF THE PRODUCT FOR ONE OR MORE OF ITS NORMAL PURPOSES, IF THERE HAS BEEN NO OTHER PRIOR EXPRESS ACCEPTANCE. THE TERMS OF THIS THIRD PARTY SOFTWARE GOVERN THE THIRD PARTY SOFTWARE AS DELIVERED WITH THE PRODUCT AND ALL UPDATED VERSIONS OF THE THIRD PARTY SOFTWARE PROVIDED UNDER MAINTENANCE AGREEMENTS OR OTHER SERVICE ARRANGEMENTS FOR THE PRODUCT WITH CANON USA OR CANON CANADA OR THEIR RESPECTIVE AUTHORIZED SERVICE ORGANIZATIONS.

Documents / Resources

Canon Color imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer [pdf] Instructions
MF751Cdw, MF753Cdw, Color imageCLASS MF753Cdw, Multifunction Wireless Color Laser Printer, Wireless Color Laser Printer, Color Laser Printer, Laser Printer, Printer

References

Leave a comment

Your email address will not be published. Required fields are marked *