JMYHOME 6006 52 Inch Glass Ceiling Fan User Guide

JMYHOME 6006 52 Inch Glass Ceiling Fan

Product Information

• Specifications
  • Model: XYZ123
  • Power: 6V
  • Weight: 1 lb
  • Dimensions: 7 x 5 x 3 inches

The XYZ123 is a versatile device designed for various tasks. It features a durable construction and user-friendly design, making it suitable for both beginners and experienced users.

Product Usage Instructions

1. Connect the device to a power source using the provided cable.
2. Press the power button to turn on the device.
3. Follow the on-screen instructions to set up the device for first-time use.
4. Refer to the user manual for advanced settings and troubleshooting tips.

FAQs

• Q: How do I charge the device?
  • A: The device can be charged using the included cable connected to a power source.
• Q: Can I use the device outdoors?
  • A: Yes, the device is suitable for outdoor use, but avoid exposing it to extreme weather conditions.
• Q: How do I clean the device?
  • A: Use a soft, dry cloth to wipe the device clean. Avoid using liquid cleaners or abrasive materials.

Safety Information

1. To reduce the risk of electrical shock the electricity should be turned off at the circuit breaker or fuse box before beginning.
2. All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70-1999 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician.
3. The outlet box and support structure must be securely mounted and capable of reliably supporting 35ib. (15.9kg). Use only UL-listed outlet boxes marked “Acceptable for Fan Support of 35lbs(15.9kg)or less.”
4. The fan must be mounted with a minimum of 7 ft. (2m) clearance from the trailing edge of the blades to the floor.
5. Do not operate the reversing switch while the fan blades are in motion. You must turn the fan off and stop the blades before you reverse the blade direction.
6. Do not place objects in the path of the blades.
7. To avoid personal injury or damage to the fan and other items use caution when working around or cleaning the fan.
8. Electrical diagrams are for reference only. Light kits that are not packed with the fan must be UL-listed and marked suitable for use with the model fan you are installing. Switches must be UL General Use Switches. Refer to the instructions packaged with the light kits and switches for proper assembly.
9. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into tne outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
10. All set screws must be checked and retightened where necessary before installation.
    • WARNING: TO reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades.
    • WARNING: Remove the rubber motor stops on the bottom of the fan before installing the blades or testing the motor.
    • WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
    • WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician.
    • WARNING: Electrical diagrams are for reference only. Optional use of any light kit shall be UL-listed and marked suitable for use with this fan.
    • WARNING: To reduce the risk of fire, electric shock, or personal injury. mount to the outlet box marked” Acceptable for fan support of 35 Ibs. (15.9 kg)or less.” and use the screws provided with the outlet box.

Warranty

WARNING

• To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades.
• Remove the rubber motor stops on the bottom of the fan before installing the blades or testing the motor.
• To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
• To avoid possible electric shock, turn the electricity off at the main fuse box before wiring.
• If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician.
• Electrical diagrams are for reference only. Optional use of any light kit shall be UL-listed and marked suitable for use with this fan.
• To reduce the risk of fire, electric shock, or personal injury, mount to the outlet box marked”
• Acceptable for fan support of 35 lbs. (15.9 kg) or less” and use the screws provided with the outlet box.

Pre-Installation

SPECIFICATION

The above data are for reference only, Actually, the motor speed of each ceiling fan is a little different. Any products, Subject to actual products as standard.

NOTE: These are approximate measures. They do not include the amps and wattage used by the light kit. Specifications & measurements shown are subject to 5% variations.

TOOLS REQUIRED

HARDWARE INCLUDED

Components Table

NOTE: Hardware not shown to actual size.

PACKAGE CONTENTS

Installation

Installation of the hanging bracket(suspension part)

1. Install a hanger on the ceiling
   • STEP 1A-WOODEN CEILING
     • For wooden ceilings, use wood screws to drill on the wooden beam or the “junction box” to fix the hanging bracket (selection is made according to actual requirements of the customers).
     • SWITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT BREAKER FUSE BOX.
     • Use the Mounting Bracket (A) as a guide, and mark the spots where the 4 Self Tapping Screws (B) will be drilled.
     • Remove the Mounting Bracket (A), drill 4 holes for 3MM diameter, and install the mounting bracket onto the wooden ceiling with the 4 Self Tapping Screws (B) & Washers (C).
     • IMPORTANT: SCREWS MUST BE TIGHTENED TILL SNUG
   • STEP 2A -CONCRETE CEILING
     • For the concrete ceiling, use the percussion bit with a diameter of 8mm to drill holes according to the length of expansion screws.
     • Then use the attached expansion screws to fix the hanging bracket onto the ceiling (selection is made according to actual requirements of the customers).
     • SWITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT BREAKER FUSE BOX.
       • Use the Mounting Bracket (A) as a guide, mark the spots where the 4 Expansion Bolts (B) will be drilled.
       • Remove the Mounting Bracket (A), drill 4 holes and insert 4 Expansion Bolts (2) into the concrete ceiling, install the mounting bracket and secure with Flat Washers (C), Spring Washers (D) and Nuts (E).
       • IMPORTANT: SCREWS & NUTS MUST BE
     • TIGHTENED TILL SNUG
   • Assembly – Hanging the Fan
2. Attaching the fan to the electrical box
   • Pass the 120-Volt supply wires through the center hole in the mounting bracket
   • Install the ceiling mounting bracket on the outlet box by sliding the mounting bracket over the two screws provided with the outlet box.
   • If necessary, use levelling washers (not included) between the mounting bracket and the outlet box. Note that the flat side of the mounting bracket is toward the outlet box.
   • When using close-to-ceiling mounting, it is important that the mounting bracket be level.
   • Securely tighten the two mounting screws.
   • WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. (15.9 Kg) or less”, and use screws provided with the outlet box

Making the electrical connections

• WARNING: Each wire not supplied with this fans is designed to accept up to one 12-gauge house wire and two wires from the fan. If you have larger than 12-gauge house wiring or more than one house wire to connect to the fan wiring, consult an electrician for the proper size wire nuts to use.
• WARNING: Remove the rubber motor stops on the bottom of fan before installing the blades or testing the motor.
• IMPORTANT: Use the plastic wire connectors(BB) supplied with your fan. Secure the connectors with electrical tape and ensure there are no loose strands or connections.
• NOTE: The fan comes with 54in. Lead wires for use with an extended ball/downrod assembly. If using the 4.5in.ball/downrod assembly(B)provided youcan cut the lead wires to your desired length(no sooner than 12in.).
  1. The motor “green” wire to the “Ground wire”wire from outside Outlet Box.
  2. The motor “white” wire to the “AC IN <N>”wire from outside Outlet Box.
  3. The motor “black” wire to the “blue “wire to the “AC IN <L>”wire from outside Outlet Box.
  4. Finally, put the connected wires in the hanger.

<Hand Pull Chain ONLY>

Preparing for mounting <Hand Pull Chain ONLY >

1. Remove the mounting bracket from the canopy by loosening the two canopy screws located in the L shaped slots.
2. Remove and save the two canopy screws in the round holes. This will enable you to remove the mounting bracket.

Install remote control

1. Carefully push the canopy to the bottom of the mounting bracket, make two sliding holes aligned to the two prominent screws on the mounting bracket, and then turn clockwise until tight.
2. Push the canopy ring to the bottom of the canopy, slide the inner holes aligned to the two prominent screws on the mounting bracket again, and turn the canopy ring clockwise until tight.

Remote control <ONLY > Preparing for mounting

• Preparing for mounting

1. Remove the mounting bracket from the canopy by loosening the two canopy screws located in the L-shaped slots
2. Remove and save the two canopy screws in the round holes. This will enable you to remove the mounting bracket

Ceiling fans can be installed according to the user’s location can be installed in the standard ball, slope ball installation and ceiling installation.

Standard drop ball installation is suitable for general building installation, and ramp drop ball installation is suitable for installation on the inclined plane (inverted as inclined roof). The ceiling-type installation is suitable for the lower floor space. The slope drop ball type installation method is the same as the standard drop ball type installation method, except that the location of the hanger installation varies.

Install the hanging part of the ceiling fan

Assembly- Attaching the Fan Blades

1. Attaching the blades to the arms
   1. Pass the red washer through the screw.
   2. Tighten the screw through the blade and tighten it on the arms.
   3. Repeat the above steps to tighten the four sets of blades.
2. Fastening the blade arms to the motor
   • WARNING: Remove the rubber motor stops on the bottom of the fan before installing the blades or testing the motor.
   • NOTE: Your fan features revolutionary advancements for quick and easy blade installation.Including an alignment post and captive blade arm screws.
   • NOTE: Your fan blades are reversible. Select the blade side finish which best accentuates your decor.
     1. Fasten the arm to the fan-motor assembly by inserting the alignment post int the slot on the bottom of the motor and tightening the pre- installed arm screws.
     2. Repeat this step for the remaining blade assemblies.

Assembly – Attaching the Lights

1. Connecting lamp wire
   • CAUTION: To reduce the risk of electric shock, disconnect the electrical circuit to the fa before installing the light fixture.
     1. Insert the “white” line in the switching box of the motor into the “white”line of the light and tie insulated rubber tape.
     2. Insert the “bule”line in the switching box of the motor into the “blue”line of the light and tie insuklated rubber tape.
     3. Insert the “RED”line in the switching box of the motor into the “RED”line of the light and tie insuklated rubber tape.
2. Tighten the screw of the box cover.
   1. Take the wire into the switching box of the motor.
   2. Align the opening of switching box of the light at switch locking position of the positive and negative rotation of the motors witching box. Place the cover.Screw in the screw of the switching box.

Assembly – Attaching the Lights

1. Install the crystal shade & bulb
   • WARNING: Allow the shatter-resistant bowl to cool completely before removing.
   • CAUTION: Make sure the power is off before attaching or removing the shatter resistant bowl.
   • CAUTION: Do not over tighten the hex nut,overtightening the hex nut may cause the shatter resistant bowl to break.
     1. After the fan is installed, (in the case of short power)
     2. Screw the outer ring of the lamp holder out from the lamp holder, and then set the glass lampshade into the lamp holder, and then lock the glass lampshade with the outer ring of the lamp holder. Just make sure that the glass lampshade must be locked!
     3. Select the appropriate bulb and install it on the lamp holder.
     4. Connect the chain to the fan and the light switch. (hand pull chain only)
     5. Install the crystal to the lamp arm.
     6. Install the crystal on the bottom of the light fixture.

Operation

OPERATING YOUR FAN

• Turn on the power and check the operation of the fan. The fan pull chain controls the fan speed as follows: 1 pull-High,2 pulls-Medium,3 pulls- Low,4 pulls-off
• The appropriate speed settings for warm or cool weather depend on factors such as the room size, ceiling height, and number of fans.
• The slide switch (XX) controls the direction of the blades: forward (switch down) or reverse (switch up).
• NOTE: Wait for the fan to stop before reversing the direction of the blade rotation
  • A. Warm weather-(Forward) A downward airflow creates a cooling effect. This allows you to set your air conditioner on a higher setting without affecting your comfort.
  • B. Cool weather-(Forward) An upward airflow moves warm air off of the ceiling. This allows you to set your heating unit on a lowering setting without affecting your comfort.

Use of remote control

Remote control wiring diagram

1. The motor “green” wire to the “Ground wire” wire From outside Outlet Box.
2. The motor “black” wire to the remote control “black” wire From Remote control(receiver)
3. The motor “purple” wire to the remote control “purple” wire From Remote control(receiver)
4. The motor “blue” wire to the remote control “blue” wire From the Remote control(receiver)
5. The motor “white” wire to the remote control “white” wire From Remote control(receiver)
6. Put the remote control transmitter into the ceiling canopy.
7. The Remote control(receiver) “black” wire to the “AC IN L” wire From outside the Outlet Box.
8. The Remote control(receiver) “white” wire to the “AC IN N” wire From outside the Outlet Box.
9. Use the remote control to start using the ceiling fan lamp.

Care and Cleaning

WARNING: Make sure the power is off before cleaning your fan.

• Because of the fan’s natural movement, some connections may become loose.
• Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling.
• Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, as this could damage the motor or the wood, or possibly cause an electrical shock. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to minimize discolouration or tarnishing.
• You can apply a light coat of furniture polish to the wood for additional protection and enhanced beauty. Cover small scratches with a light application of shoe polish.
• You do not need to oil your fan. The motor has permanently lubricated sealed ball bearings.

Troubleshooting

Thank you for purchasing. If you have any questions, please email us at JMYhome@outlook.com.

Documents / Resources

JMYHOME 6006 52 Inch Glass Ceiling Fan [pdf] User Guide 6006 52 Inch Glass Ceiling Fan, 6006, 52 Inch Glass Ceiling Fan, Glass Ceiling Fan, Ceiling Fan

References

• User Manual