wiltec 64210 30 Tons Workshop Press Instruction Manual

Contents hide

1 wiltec 64210 30 Tons Workshop Press

2 Product Information

3 Product Usage Instructions

4 FAQ

5 Introduction

6 Maintenance

7 Troubleshooting

8 Exploded view and parts list

9 CONTACT

10 Documents / Resources

10.1 References

wiltec 64210 30 Tons Workshop Press

Product Information

Specifications

Product Name: 30-tons Workshop Press 64210

Illustration: Similar, may vary depending on model
Contact Email: service@wiltec.info

Online Shop: Manual in several languages

Product Usage Instructions

Safety Instructions

The owner and/or user must read and understand the operating instructions before using the device. Personnel handling the press should be cautious, competent, trained, and qualified. Follow all safety warnings provided.

Exploded View and Parts List

Name	Quantity
Upper traverse	1

Important Note: Reproduction and any commercial use of this operating manual require written permission from WilTec Wildanger Technik GmbH.

FAQ

Q: Where can I find the most recent version of the manual?

A: The most recent version of the manual in multiple languages can be found in our online shop at the following link: Manual in several languages.

Please read and follow the operating instructions and safety information before the initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.

The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating manual nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up to date , errors cannot be ruled out If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:

service@wiltec.info

or use our contact form:
https://www.wiltec.de/contacts/

The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch

Our postal address is:
WilTec Wildanger Technik GmbH

Königsbenden 12
52249 Eschweiler

Germany

To return your goods for exchange, repair, or other purposes, please use the following address. tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods.

Retourenabteilung

WilTec Wildanger Technik GmbH

Königsbenden 28
52249 Eschweiler

Germany
E mail: service@wiltec.info

Tel: +49 2403 5559 2 0
Fax: +49 2403 5559 2 1 5

Introduction

Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it.
Keep these operation instructions in a safe place.

Safety instructions/warnings

The owner and/or user must have read and understood the operating instructions of the device before using it. Installed personnel should be cautious, competent, trained, and qualified in the safe handling of the working equipment used when working with the shop press. Warnings should be read and understood.

Be familiar with the application control, the application process and the warnings.
Make sure that all connectors are attached and secure.
Make sure to know the contents of the instructions for use.
This device is not intended to be used by persons (including children) with reduced physical or mental abilities or with a lack of experience and knowledge unless they are supervised and/or instructed by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the device.
Immediately contact your superior or workshop if something unforeseen happens.
Stay concentrated and do not allow any distractions during work.
Do not use welding equipment near the press.
Always make sure that the workplace is well-lit.
Make sure to wear solid shoes.
Use a hair net for long hair.

Wear appropriate clothing.
Take off jewellery (rings, earrings, watches, etc.).
Make sure not to wear loose strips or belts.

Only use the press if you feel able to.
Long working in an upright position can cause a feeling of dizziness. Make regular breaks and drink enough.
Never open threaded connections that are under charge/pressure.

Bring the press to its lowest position before refilling the hydraulic oil. Only use high-quality hydraulic oil, NEVER use brake liquid, alcohol, glycerine, cleaning agents, engine oil, water, dirty oil, or other unsuitable liquids.
The hydraulic cylinder is under pressure and must not be opened by force.

Control/inspection

Before commissioning the press, perform a visible inspection to find leaks, damages, loose, missing, or worn parts. Regularly control the oil level. Bring the press to its lowest position before refilling the hydraulic oil. Remove the cap; the oil level must exactly reach to the opening. If necessary, refill the hydraulic oil. Change all the oil once a year.
Regularly apply lubricant to all moving parts. Regularly check the jack for rust, cracks, and corrosion.
Clean the affected spots with an oily cloth.

In case it should be necessary to scrap the press, the oil should be drained and cleaned up correctly; the rest of the press should be recycled.

Warning

Read these instructions carefully before operating the device.

This workshop press may only be operated by persons experienced in operating this type of device and being trained. In case you have no experience in matters of using this machine, have yourself trained beforehand.
Do not exceed the capacity of the press when operating it.
This workshop press is only designed for aligning, bending, and straightening. No springs or other objects susceptible to being catapulted through the room may be compressed. No objects susceptible to bursting while being worked on may be compressed.

Before operating the workshop press, make sure that there are no damaged parts. Tighten all loose screws.
Certain parts might be catapulted out of the press when being compressed. Protect yourself consequently to prevent any injuries. Do not reach into the device or near the pressure piston. Make sure that the piece to be worked on is well-centred and fixed on the pressure plate for not to be catapulted out of the press during work.
Always wear safety goggles and appropriate protective clothes.

Maintenance

Check the workshop press for possible damages before operating it. Otherwise, the workshop press cannot be operated.
Regularly lubricate all moving parts such as the hydraulic piston.
Check the hydraulic connections or conducts before operating, making sure that there are no damages.

Troubleshooting

Problem	Possible cause	Solutions
The piston does not move	Mechanical part damaged	Apply lubricating oil or grease.
The piston does not raise, raises but slowly	1. container overfilled	1. Adapt the oil level accordingly.
The piston does not raise, raises but slowly	2. Incorrect connections	2. Clean and lubricate moving parts.
The piston does not completely raise	Oil level too low	Top-up oil.

Exploded view and parts list

№	Name	Quantity
1	Upper traverse	1
2	Bolt M16×20	4
3	Flat washer ⌀16	4
4	Nut M16	4
5	Spring	2
6	Hydraulic cylinder	1
7	Cylinder base	1
8	Hook	2
9	Post	2
10	Flat washer ⌀8	2
11	Nut M8	2
12	Pressure plate	2
13	Fixation plate	1
14	Bar	2
15	Lower traverse	1
16	Foot	2
17	Bolt M12×30	4
18	Flat washer ⌀12	4
19	Nut M12	4
20	Hexagon socket screw M8×12	2

Important note:
Reproduction and any commercial use (of parts) of this operating manual, requires the written permission of WilTec Wildanger Technik GmbH.