Lingdu D600 Dash Cam
Customer Service
- Defective or damaged item?
- Inaccurate description?
- Missing parts or accessories?
- Performance or quality not adequate?
- Wrong item was sent?
service@lingdu.us.Response in just 12 hours Contact us before returning the item. We will help you resolve any issue ASAP.
Note
- A 64GB microSD card is provided with the LINGDU dashcam when you purchase the product. Be sure to format your microSD card with your dash cam for the first time use.
- Please ALWAYS connect with power when using. As it is a built-in Super Capacitor (Only has a 1mAh Lithium Metal Battery used to memorize time).
Important Safety Information
- Thank you for purchasing this LINGDU dashcam.
- This instruction manual contains information on how to operate your dashcam.
- Before using your dashcam, we recommend that you read through this manual to ensure correct usage.
- To improve the performance of the product, the contents of this manual are subject to change without prior notice.
- Do not disassemble, repair, or modify the product yourself.
- Doing so may cause fire, electric shock, or malfunction. For internal inspection and repair, contact the service centre.
- If any foreign matter gets inside the product, detach the power cord immediately.
- Contact the service centre for repair.
- Do not adjust the product while driving.
- Doing so may cause an accident. Stop or park your car in a safe place before installing and setting up the product.
- Do not install the product in a location where the product can interfere with the driver’s field of vision.
- Doing so may cause an accident.
- Do not use a damaged or modified power cord. Only use the cords provided by the manufacturer.
- Damaged or modified power cords may cause an explosion, fire, or malfunction.
- Do not operate the product with wet hands.
- Doing so may cause electric shock.
- Do not install the product in an environment with high humidity, or combustible gases or liquids.
- Doing so may cause an explosion and/or fire.
- Do not leave the product near infants, children, or pets.
- There is a risk of them swallowing small components, and/or their saliva may get into the product, causing an explosion due to a short circuit.
- Do not spray water or wax directly onto the product while cleaning the inside of the car.
- Doing so may cause fire, electric shock, or malfunction.
- If smoke or an unusual smell is emitted from the power cord, detach the power cord immediately.
- Contact the service centre or your distributor.
- Keep the terminals of the power cord clean.
- Failure to do so may cause excessive heat and fire.
- Use the correct input voltage.
- Failure to do so may cause explosion, fire, or malfunction.
- Plug in the power cord firmly so that it cannot easily be disconnected.
- Failure to do so may cause a fire.
- Do not cover the product with any material.
- Doing so may cause external deformation of the product or fire.
- Use the product and peripherals in a well-ventilated location.
In The Box
- Check the box for each of the following items before installing the dash cam.
Note
- To improve the performance of the product, the contents of this manual are subject to change without prior notice.
Specifications
Product Diagram
Note
The clock is displayed during normal recording, while the recording duration of the locked video segment is displayed during emergency recording.
Getting Started
The camera is designed to power up and record automatically when it receives power. Then saves the video record and turns off automatically when the car shuts off.
- Auto Power ON/OFF:
Plug Car charger into the cigarette lighter socket. When the car engine is on, a dash cam will turn ON and start recording automatically. When the car key is turned to the LOCK position, the dash cam automatically saves the recording and turns OFF. - Manual Power ON/OFF
Manually Turn ON: Press the power button once. Manually Turn OFF: Press and hold the power button for at least 2 seconds.
Note
- A 64GB microSD card is provided with the LINGDU dashcam when you purchase the product. Be sure to format your microSD card with your dash cam for the first time use.
- Please ALWAYS connect with power when using. As it is a built-in Super Capacitor (Only has a 1mAh Lithium Metal Battery used to memorize time).
- Setting Date & Time: Please calibrate the date/time based on your location under the TIME ZONE SETTING by going to the APP system settings menu, please refer to page EN-16.
- Some trucks/cars’s 12V cigarette outlets are always HOT, which means they provide constant power even when the car is turned off and locked. If this is the case for your vehicle, then the auto ON/OFF feature will not work. And if you leave the camera continuously recording when the car is turned off, then it will drain your car/truck’s battery and you might not have enough power to start your car for next time. To remedy this situation, you can do one of the two options:
- Hardwire your dash cam to your car’s fuse box with a 3-lead Auto Trigger Hardwire Kit.
- Change the connection in the fuse box for your 12V outlet to a socket that only supplies power when the car key is turned to ACC or ON position.
Installation
Install the front camera behind the rearview mirror. Install the rear camera at the top of the back windshield. Remove any foreign matter and clean and dry the windshield before installation.
- Turn off the engine, and gently push the card into the slot until it locks into place. (Please use class 10 or above high-speed U3 micro-SD card) |
- Find a suitable place on the windshield that doesn’t obstruct the driver’s field of vision remove any foreign matter and clean and dry the windshield before installation. Tear off the protective layer of the electrostatic sticker and adhere the electrostatic sticker to the windshield to prevent marking/glue on your windshield after removing it.
- Peel off the protective film from the double-sided tape and attach the front camera to the electrostatic sticker. Adjust the angle of the lens by rotating the body of the front camera.
- Peel off the protective film from the double-sided tape and attach the rear camera to the rear windshield. Adjust the angle of the lens by rotating the body of the rear camera, and connecting the front camera and the rear camera.
- Use the pry tool to lift the edges of the rubber window sealing and moulding and tuck in the rear camera connection cable.
- Plug the cigarette lighter power cable into the cigarette lighter socket and the front camera. Use the pry tool to lift the edges of the windshield trim/moulding and tuck in the power cord.
- Turn on the engine. The dashcam will power up and start recording. Video files are stored on the microSD card. Turn off the engine. The dashcam will automatically stop recording and power down.
Playing Video Files Using Your Smartphone
- Check real-time video using your smartphone
Download the video files onto your smartphone
The app won’t show the live video on your phone. Does it only show a picture of the beach?
The cellular data will cause the live video not to be viewed. If the APP won’t show the live video, please disable the ‘LINGDU’ cellular data of your phone. Sure that the Local Network of the ‘LINGDU’ is turned on.
- For the Latest iOS System: Setting→LINGDU→Click ‘Wireless Data’→Select ‘WLAN’.
- For Older iOS System: Setting→LINGDU→Disable the Cellular Data.
Note
- WiFi Direct lets you directly connect your smartphone to your dash cam via WiFi within a range of 10FT.
- Once it is connected to the LINGDU APP it will automatically update the date/time.
- The LINGDU is available for devices running Android 5.0 and higher, or iOS 9.0 and higher.
What is a WiFi Feature?
The WiFi feature has been designed so you can pair your dash camera wirelessly with your smartphone and access your recording instantly from the dash cam. Here you can view, download and share your videos easily with your friends and family. Just like how you would connect your Bluetooth speaker to your smartphone for wireless music play, the same way dash cameras use a WiFi signal (instead of Bluetooth) to pair your smartphone with LINGDU D600.
Can I watch the videos around my car remotely?
NO. LINGDU D600 dash cam is NOT made to broadcast footage over the cloud or internet. It is NOT a cloud or an IP camera and it is NOT meant to do that. You can get live video and footage on the LINGDU dashcam’s APP as long as you stay within the 10FT range from the dashcam.
What is the WiFi Range?
The WiFi signal range is about 10FT when there are NO obstructions in the middle. Please NOTE that just like your home WiFi network, you don’t have a Wi-Fi signal outside your home, in the same way, the WiFi range is 10FT from this small device.
For Android phones
- When installing the LINGDU APP, it will have two pop-up prompts, select ‘While using the APP’ to allow LINGDU to access this device’s location, and select ‘Allow’ to allow LINGDU to access photos and media on your device.
- There is one extra step you will have to take for the first time. Once you connect to the WiFi of D600, it will say ‘No Internet’.
- Which is fine. Wait about 10-15 seconds until you see the below popup or notification. You just have to tap on the pop-up notification that will show up in a few seconds to select that you still want to stay connected even though there is NO Internet. Once you select this OK, you are set to go.
For iPhone
Calibrate Date/Time
LINGDU D600 has built-in GPS, need to set the Timezone first in the APP so that the video date/time stamp will be correct. Please connect to LINGDU APP, using the function menu to set limezone.
Format Micro-SD Card
There are two ways to format Micro-SD card
- Press and hold the WiFi button for 8 seconds to format and default settings, you will hear the sound “di” when format successfully.
- Please connect to the LINGDU APP, using the function menu named “Format” to do.
General Setting
Video Settings
Video Resolution
Allow to choose the desired video resolution and fos(frames per second).
- 3840x2160P 25fps+1920x1080P 25fps(Default)
- 2560x1440P 25fps+1920x1080P 25fps
- 2304 x1296P 25fps+1920x1080P 25fps
- 1920 x1080P 25fps+1920x1080P 25fps
Loop Recording – 1min (Default) / 3mins/ 5mins
- Here select the length(1/3/5 min) of each video clip for the loop recording. This function allows the dash cam to continuously record.
- Please notice: The dash cam will keep deleting the oldest files automatically when memory card gets full so that it can keep recording over and over.
Audio Recording – On(Default)/Off
The dashcam has built-in microphone to record audio with video. You can choose to record mute video by choosing OFF.
Exposure —-2.0/ -1.0/ +0.0(Default)/ +1.0/+2.0
To adjust video exposure setting for either brighter or darker video accordingto your preference.
G-Sensor – Off/ Low/ MID(Default) / High
G-sensor is a 3-axis impact gravitational accelerometer, designed to detect physical and gravitational forces on the dash cam. Once G-sensor has been triggered due to physical or gravitational impact force on the camera, the current video file will be locked as an emergency file so it won’t be deleted by loop cycle function. The higher the G-Sensor sensitivity is, the less force will be needed to trigger automatic file protection.
Parking Mode
- This function will ONLY work when 3-Lead Hardwire Kit is installed properly, the output current of Hardwire Kit needs to reach 2.5A.
- Then select parking mode. This parking mode has two options to choose from.
Note
- Please download and update the latest firmware from the manual.
- Custom-designed Micro 3-Lead Hardwire Kit is required to use this new feature. Not included in the packaging, on Amazon search: Micro 3-Lead Hardwire Kit for D600 Dash Cam
Time-Lapse Parking Mode
- When you turn OfF the car’s engine and turn the key to the lock position. Then the camera will STOP the continuous video recording and it will go into the timelapse 1ps recording mode automatically.
- Now while this timelapse is being recorded, if someone hits your car and if the impact reaches the set G-Sensor level, then the camera will start to record 1-min continuous video, save & lock that video in Event folder > then return to the timelapse 1fps recording.
- Now when you start your car for the next time, the camera will automatically STOP the timelapse parking mode. Then it will go into normal video mode automatically to start the continuous video recording.
Collision Detection Parking Mode
- When you turn OFF the car’s engine and turn the key to the lock position. Then the camera will STOP the continuous video recording and it will go into the impact detection mode and the camera will turn OFF.
- Now while the camera stays in impact detection mode, if someone hits your car and if the impact reaches the set G-Sensor level, then the camera will turne ON > then it will start to record 1-min continuous video, save & lock that video in Event folder > then the camera will turn OFF.
- Now when you start your car for the next time, the camera will automatically go back into normal video mode automatically to start the continuous video recording.
Time-Lapse Parking Mode Working Time
- This setting allows you to choose the Working Time of Time-Lapse Parking Mode.
Fatigue Driving Reminder— Off(Default)/ 2H
- When you activate this feature, the dash cam will beep every 2 hours to remind you if you are experiencing fatigue while driving.
Screen Save— Always Light(Default)/ Screen Off After 1-Min
- Screen Saver Off: This screen will always be on.
- Screen Off After 1-Min: The screen will turn off after 1 minute of inactivity.
Volume – Off/ Low/ MID(Default)/ High
- This feature allows you to set the volume level for the boot sound volume, prompt volume through camera’s internal built-in speaker.
Boot Ringtone — On(Default)/ Off
- This feature allows you to turn ON/OFF the camera’s Boot Ringtone.
Voice Control — On(Default)/ Off
- ONLY support English: turn on WiFi, take picture, turn off recording, turn off WiFi, open recording, lock the video
Voice Command
Say a command, but ONLY support English
- To turn on WiFi, say Turn on WiFi
- To take a picture, say Take picture
- To stop recording, say Turn off recording
- To turn off Wifi, say Turn off WiFi
- To start recording, say Open Recording
- To lock the current video files, say Lock the video
Frequency — 50HZ/ 60HZ(Default)
- Here you should choose the frequency accordingly to your power supply specification used in your country based on your geographical location.
Rear Mirror
- This feature works only on the rear camera image.
- On: The image of the rear camera is as same as in the rear mirror, what’s on the left in reality-> it’s on the right of the dash cam screen;
- Off: The rear camera image is as same as what you see,what’s on the left in reality- it’s on the left of the dash cam screen.
Rear Rotate
This feature will allow you to flip your video 180 degree so you can still have a correct side of image when the camera is mounted upside-down.
Date/Time Format
Thie feature allows you to select the date format.
Timezone
- UTC/GMT -7:00 (Default)
- UTC/GMT -12:00 to UTC/GMT +12:00
- Here you can choose your desired or local time zone setting based on UTC/ GMT value.
Speed Unit — km/h/MPH(Default)
You can choose desired speed option stamp to be displayed and recorded on video stamp based on your selection.
GPS Information
Check the satellite number / Longitude / Latitude / Speed.
Car Plate Number
You can set your license plate number, and it will be displayed as a watermark in the video.
WiFi Bands
D600 is built in 2.4GHz and 5GHz Dual-frequency WiFi module, the default value is 5GHz.
If your phone can’t search LD01 Wifi, it meas your phone ONLY support 2.4GHz band, You can choose 2.4GHz band.
SD Card Information
Storage information of memory card can be found here.
Video Stamps
Turn On/Off the LINGDU logo / Date/Time / GPS Information / Speed / Car Plate Number Stamp shown on recorded files separately.
System Setting
WiFi
Here you can change the WiFi Password in APP, the default password: 12345678
Format SD Card
The formatting process will make sure that the card’s file system format is optimized for the camera.
Note: For stable performance, it is recommended that you format the memory card every 1-2 months.
Default Settings
Reset the Dash Cam to default settings. Your recordings will not be affected.
APP Version
Here you can check the current APP version installed on your phone.
Firmware Version
Here you can check the current firmware version installed on your camera. You will need this information in the future to check if newer version of firmware is available.
Playing Video Files Using Your Computer
- Remove the microSD card from the dashcam.
- Insert the card into the microSD card reader and connect it to a computer.
- Download LINGDU GPS Player from www.lingdu.us › Support > Downloads and install it on your computer.
- Install the LINGDU GPS Player on your computer. (Note: Please close or ignore the prompt of the anti-virus software, we confirm that it will not bring any security impact to your computer.)
- You can click the ‘Open Files’ button to browse and select the Video or Event folder of the microSD card on the LINGDU GPS Player. It will show all files in the Normal or Event or Parking folder. Or you can also drag the video files directly to the launcher screen.
- There are two ways to play video.
- A: Click File-Open icon to choose the folder which you want to play, click to start play.
(Note that you can ONLY select one folder to play and see no vicen files) I
- B: Select from ‘My Computer’ and find the memory card disk, choose the video file you want to play, you can drag and drop the file directly to the player. You can get the GPS information on the plaver.
Firmware Update
- Remove the microSD card from the dashcam.
- Insert the card into the microSD card reader and connect it to a computer.
- Download the latest D600 Firmware from www.lingdu.us > Support > Downloads on your computer.
- Unzip the downloaded firmware (Zip file) and copy all firmware files to the root directory of microSD card.
- Connect the camera to the car charger to start the firmware update process. You should see the red light will be solid which means your D600 dash camera is updating the new firmware.
Please NOTE
The firmware update may take up to about 1mins. So please be patient. Make sure the POWER does NOT get disconnected while the firmware is being updated. Once the firmware is updated, the camera will turn ON automatically. - You can turn on and check the latest firmware version by going into the APP’s settings > Firmware Version.
Voice Prompts
FAQ
Q: Camera turns ON / OFF automatically?
Ensure that the output current can reach V/2.5A and use our car charger. And ensure that the ear camera are connected correctly. It is to improve stability that the dashcam reboots automatically once if it detects that there are different cameras connected.
Q: Video Image is blurred?
Remove the protective lens film, clean the lens, make sure the windshield is clean and clear of grease, dirt, and debris.
Q: Camera gets HOT?
It is normal for your camera to run slightly hot. Due to video being recorded at high speed, the dash cam may be hot during using. (No more than 158°F/70°C).
Q: No power to my Dash Cam but it works upon my computer?
The cigarette power cable is not working. nspect the fuse in the Car Power Cable plug. If the fuse is found to be blown, inspect the power cable for damage which may have caused the fuse to blow.
Q: Video Files cannot be played on my computer? The video files from the Dash Cam are in MP4 format and may not be compatible with your PC if suitable playback software is not installed.
The video files from the Dash Cam are in MP4 format and may not be compatible with your PC if suitable playback software is not installed.
Q: Video has no sound?
Ensure that 'Record Audio' setting is turned ON. Ensure that 'Timelapse Record' setting is turned OFF within the APP Menu.
Q: Video is blurred?
The Dash Cam has a minimum focal range of around 2 meters. Objects closer than this are likely to become blurred.
Q: Voice prompt Memory Error?
Using unqualified SD or third party cards can affect dashcam's performance and in some cases, force the dashcam to reboot randomly during recording. If it still can not work normally, it should be that the TF card is unqualified and can not meet the recording requirements of the dash cam. Please contact us to get a new emory card.
- Q: The sound is not synchronised with video during playback?
- A: The Codecs upon your PC may not be compatible or the latest standard. Download the latest LINGDU GPS Player from www.lingdu.us › Support > Downloads.
NOTICE
This product complies with the radio interface requirements of the European Community.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service. or the shoo where vou bouaht this product..
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followina measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
CONTACT
- Product Dash Cam
- Manufacturer Dongguan Lingdu Electronic Technology Co., Ltd
- Address 1 Longcheng Street, Qingxi Town, Dongguan City, Guangdong Province, China
- Product Warranty One-Year Limited Warranty
- Customer Support service@lingdu.us.
- www.lingdu.us.
Apple logo & App Store are trademarks of Apple Inc., Google logo and Google Play are trademarks of Google Inc.
Documents / Resources
 |
Lingdu D600 Dash Cam [pdf] User Manual D600 Dash Cam, D600, Dash Cam, Cam |