DAYLYRIDE YG90 E-bike Hand Control Panel 1000W 48V 17Ah Instruction Manual

DAYLYRIDE YG90 E-bike Hand Control Panel 1000W 48V 17Ah

Specifications

• Outer shell material: ABS
• Liquid crystal transparent window material: High hardness acrylic
• Work voltage: DC 24V, 36V, 48V, 60V (customizable)

Product Usage Instructions

Hand Control Panel Operation
Make sure to familiarize yourself with the hand control panel on the E-bike.

Connection Mode
Connect the E-bike to the power source following the line sequence provided in the manual.

Function Description
The display screen provides various functions such as speed display, power level indication, mileage tracking, headlight control, and more. Refer to the manual for detailed instructions on each function.

1. Headlight Operation
   You can manually turn on the headlight or set it to automatically adjust based on light sensitivity.
2. Battery Power Display
   Monitor the battery power level through the display screen.
3. Cycling Model
   Choose between different cycling modes including walk boost mode, constant speed cruise mode, and power file positions.
4. Speed Display
   View maximum speed, average speed, and choose between MPH or KM/H units.
5. Vehicle Status Display
   Check for any fault icons or status prompts on the screen to ensure safe operation.
6. Installation Settings
   Adjust settings such as backlight brightness, mileage unit,voltage level, dormancy time, PAS mode, and wheel diameter value for accurate readings.

Frequently Asked Questions (FAQ)

Q: How do I adjust the backlight brightness?
A: You can adjust the backlight brightness level from the darkest to the brightest using the settings on the control panel.

Q: What is the purpose of the wheel diameter setting?
A: Setting the wheel diameter accurately is crucial for the meter to calculate the true speed based on signal data. Enter the correct wheel diameter value in inches within the specified range for optimal performance.

Out shell Size and Material

Out shell material is ABS, Liquid crystal transparent window material is high hardness acrylic。

31.8mm stent is available 22.2mm, 25.4mm, 28.6mm

Transfer Ring Selection

Work Voltage and connection mode

1. Work voltage: DC24V, 36V, 48V, 60V, (which you can choose on the meter),the others you can customized.
2. Connection mode :
   Line sequence of the label connector

Instrument Outlet

Table: Line sequence of the label connector table

Order of line	Color of line	Function
1	Red（VCC）	Instrument power cord
2	Blue（K）	Controller power line
3	Black（GND）	Meter earth wire
4	Green（RX）	Meter data receiving line
5	Yellow（TX）	Data transmission line of instrument

Notes: Part of the products lead wire use waterproof connection. User cannot see the color of lead line.

Function description

1. Display function
   Speed display, power level display, power indicator, failure warning, total mileage, single mileage, headlight display, single driving time display
2. Control, setting up functions
   Power switch control, headlight switch control, 6Km/h point control, wheel diameter setting,maximum speed setting, idle automatic hibernation time setting, backlight brightness setting, voltage level setting
3. Communication protocol：UART

All the contents of the display screen(full display in boot 1S)

Show content introduction

1. Headlight The instrument can be manually turned on and the brightness of the sensing environment is automatically turned on(light sensitivity support is required).
2. Battery power display
3. Multifunctional display area Total mileage ODO, single mileage TRIP A, single mileage TRIP B, battery current voltage VOL, current operating current CUR, remaining mileage RM; Instrument boot time TM
4. Cycling model
   Walk boost mode; Cruise: constant speed cruise mode; PAS: Power file position: 0 ~ 9 adjustable;
5. Speed display area
   Maximum speed MAX, average speed AVG
   Unit MPH, KM/H
   The meter will calculate the true speed based on the wheel diameter and signal data
6. Vehicle Status Display Area

Vehicle Status Code Meaning：

Status Code(Decimal)	State Meaning	Remarks
E00	Normal
E02	Brakes
E06	Battery undervoltage
E07	Motor failure
E08	Turn malfunctioning
E09	Controller failure
E10	Communication reception failure
E11	Communication dispatch failure

install

• P01：Backlight brightness： the darkest level 1, the brightest level 3;
• P02: mileage unit： 0: KM; 1: MILE;
• P03: Voltage level: 24V, 36V, 48V, 60V;
• P04: Dormancy time： 0, not dormancy; Other numbers are dormancy times, range: 1-60; Unit minutes;
• P05: PAS number selection: 0, 3 file mode: 1,5 gear mode:
• P06: Wheel setting: unit, inch; wheel diameter value: 5.0 ~ 50 Precision: 0.1 inch
  This parameter is related to the meter display speed and needs to be entered correctly;
• P07: Speed gauge magnetic steel number: range: 1-100;
  This parameter is related to the meter display speed and needs to be entered correctly;
  If it is an ordinary hub motor, the number of magnetic steel is input directly;
  If it is a high-speed motor, it is also necessary to calculate the deceleration ratio, and the input data = the number of magnetic steel × deceleration ratio;
  For example: number of motor magnets 20, deceleration ratio 4.3: input data is: 86 = 20 × 4.3
• P08: Speed limit setting: Agreement No. 2 range 0-100km / H, 100 means no speed limit;
  The input data here represents the maximum operating speed of the vehicle: for example,input 25, indicating that the maximum operating speed of the vehicle will not exceed 25km/h; The drive speed is maintained at the set value,Error: ± 1km/h; (The speed limit for power and turning is equal)
• Note: The value here is based on kilometers. When the unit setting is converted from kilometers to miles, the speed value of the display interface automatically converts to the correct mile value, but the speed limit value data set at this menu under the mile interface is not converted. Is inconsistent with the actual speed limit of the mile speed;
• P09: zero start, non-zero start setting： 0: zero start; 1: Non-zero start;(valid for protocol 2 only)
• P10: The drive mode is setting： 0: Power Drive(how much power is output is determined by the power file bit, and the switch is invalid at this time).(valid for protocol 2 only)
  1. Electric drive(by turning the handle drive, the power file bit is invalid at this time).
  2. Power Driven and Electric Driven Coexistence
• P11: Help sensitivity setting：range: 1-24;(valid for protocol 2 only)
• P12: Help start intensity setting：range: 1-5;(valid for protocol 2 only)
• P13: Power Magnetic Steel Disk Type Setting： 5, 8, 12 Magnetic Steel Types
• P14: Controller limit value setting：range: 1-20A
• P15: Controller undervoltage
• P16: ODO zero setting： length press key 5 seconds ODO zero
• P17 :Automatic cruise optional：0: No enabling cruising, 1: enabling cruising; (valid for protocol 2 only)；(valid for protocol 2 only)
• P18: Display speed ratio adjustment： range: 50 % ~ 150 %,
• P19:Zero PAS selection： 0: 0 file, 1: does not include 0 file
• P20 :0:2 Protocol 1:5 S Protocol 2: Standby 3: Standby

Key Introduction

The specific combination of keys is as follows

Press the button to use the brief
Key operation is divided into short press and long press, and combination key length press
Short press is used for rapid/frequent operations, such as the specific key combination position as follows

1. When riding, you need to modify the power/speed file, short-press
2. Toggle display data for multi-function areas during cycling, short click Single key length is mainly used to switch the mode/switch state Composite keys(long presses) are used to set parameters because the operation is complex, which can reduce errors
   (Short press does not make the composite key, because it is easy to trigger mistakenly, so it is too difficult to do）

Specific operational explanations:

1. modify the power ratio/power file Let’s say the current is power mode.
   1. Short press Help + 1
   2. Short pressHelp – 1
2. Toggle speed display
   Long press, Toggle speed display
3. Set / Disable 6Km/h Cruise, Switch Headlight, ODO Clear Zero
   Static state of vehicles，long press ，Will enter 6KM/h cruise mode, let go of cruise mode;long press Turn the lights on and off；
   P16Menu Interface，long press five seconds，ODO clear zero。
4. Switching liquid crystal display
   If the current display is working，long press Will turn off the screen, instead turn on the screen
5. Toggle multi-function display area content
   Short Can switch the value of the multifunction display area
6. Set Parameters
   Long press + Will enter the parameter setting interface. Parameters that can be set include,Wheel diameter(in: inches), number of magnetic steel, liquid crystal brightness, low pressure points, etc.(see settings: P01-P20)；
   Under Settings Interface，Can be short press ，or Set the value to perform a
   1. Short press Switch to Next Parameter；Exit settings and save parameters. If not operated, the modified parameters will automatically exit and be saved after 8 seconds.

Note: due to the upgrade of the e-bike, the content of the product will be different from the specifications, but it will not affect your normal use.

DAYLYRIDE Bikes

Address：NO.68 HOI YUEN ROAD,KWUN TONG,KOWLOON,HONG KONG
Contact Email: daylyridebikes@gmail.com
Contact Number：0519-69656597
Web: https://daylyridebikes.com/

Documents / Resources

DAYLYRIDE YG90 E-bike Hand Control Panel 1000W 48V 17Ah [pdf] Instruction Manual YG90 E-bike Hand Control Panel 1000W 48V 17Ah, YG90, E-bike Hand Control Panel 1000W 48V 17Ah, Hand Control Panel 1000W 48V 17Ah, Control Panel 1000W 48V 17Ah, Panel 1000W 48V 17Ah

References

• 【web】什么意思_英语web的翻译_音标_读音_用法_例句_在线翻译_有道词典
• DAYLYRIDE E-Bike | Best Electric Bikes for Sale
• User Manual