XTPRO Autonomous Rancher App User Guide

XTPRO Autonomous Rancher App

Product Usage Instructions

• Compliance
  • Changes or modifications to the product may void the user’s authority to operate the equipment. It is important to adhere to the following guidelines:
    • Please ensure at least 20 cm separation from the user when the device is in use.
    • Do not attempt any unauthorized modifications to the product.
    • Follow all safety instructions provided in the user manual.

FAQs

• Q: Can I modify the product?
  • A: No, any changes or modifications may void your authority to operate the equipment.
• Q: How far should the user be from the device during operation?
  • A: Please ensure at least a 20 cm separation between the user and the device when it is in use.

INSTALLATION STEPS

• STEP 1
  • Place the 2 pins and tag in the applicator.
• STEP 2
  • Place the tag on the front of the animal’s ear with the flexible arm routed beneath the top leading edge of the ear.
  • Ensure the heart rate sensor is facing the ear and the solar panel is facing upwards once installed.

Autonomous Rancher App

Assigning your Tpro Tags in the Autonomous Rancher App

If your animals ARE in the App

1. Open the Autonomous Rancher app on your device.
2. Go to the menu bar > Working Cattle > “+” > “Assign 701x Device” > “Save.”
3. Open the working cattle station you just created called “Assign 701x Device.”
4. Tap “Station: Default Station.”
5. As the animal loads into the chute, type in the visual ear tag number and select the animal.
6. Tap the QR code icon to scan the tag OR tap “Select a Tag” and select the tag with matching device identification.
7. Tap “Save.” Your 701x device is now assigned to an animal.

If your animals ARE NOT in the App

1. Open the Autonomous Rancher app on your device.
2. Go to the menu bar > “Livestock” > “My Herd” > “+” and fill in all required fields.
3. As the animal loads into the chute, tap the QR code icon to scan the tag OR tap “Select a Device” and select the tag with matching device identification.
4. Tap “Save.” Your 701x device is now assigned to an animal.

FCC

Compliance

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications may void the user’s authority to operate the equipment. Please ensure at least 20 cm separation from the user when the device is in use.

Documents / Resources

XTPRO Autonomous Rancher App [pdf] User Guide 2AZT3-701XT2, 2AZT3701XT2, 701xt2, Autonomous Rancher App, Rancher App, App

References

• User Manual