AcraDyne Gen 4 HT Series Gen IV High Torque Series DC Nutrunner Instruction Manual

Gen 4 HT Series Gen IV High Torque Series DC Nutrunner

“`html

Specifications

  • Product Name: Gen 4 HT Series Gen 3 5000 HT Angle Series
  • Type: High Torque DC Nutrunners
  • Maximum Tool Cable Length: 20 meters

Product Usage Instructions

Safety Information

It is essential to follow safety guidelines when operating the
Gen 4 HT Series Gen 3 5000 HT Angle Series high torque DC
nutrunners:

  • Keep the work area clean, well-lit, and free of clutter.
  • Avoid operating the tool in explosive atmospheres.
  • Keep children and bystanders away during operation.

Operation

Ensure the following components are properly set up for
operation:

  • Controller
  • Power cord
  • Tool
  • Tool Cable (not exceeding 20 meters in length)
  • Reaction Bar (application specific)

Maintenance

Regular maintenance is crucial for the optimal performance and
longevity of the tool system. Follow these maintenance
recommendations:

  • Refer to the recommended maintenance schedule provided in the
    manual.
  • Keep the tool clean and free of debris.
  • Check and tighten any loose components regularly.

Recommended Maintenance

The manufacturer recommends the following maintenance tasks:

  • Cleaning the tool after each use.
  • Regularly inspecting cables for damage.
  • Lubricating moving parts as per the guidelines.

FAQ

Q: Can I use the tool in wet conditions?

A: No, it is not safe to expose the power tool to rain or wet
conditions as it increases the risk of electric shock.

Q: How long can the tool cable be?

A: The tool cable should not exceed 20 meters in length for safe
and efficient operation.

“`

Gen 4 HT Series Gen 3 5000 HT Angle Series
Operation Manual
High Torque DC Nutrunners
10000 SE Pine St., Portland OR 97216 · 503-254-6600 · 800-852-1368 www.aimco-global.com

Table of Contents

Safety Information

3

Operation

4

Reaction Bar Safety

7

Environmental & Electrical Specifications

8

Tool Specifications

10

Accessories

14

Recommended Maintenance

15

AIMCO Limited Warranty

16

Introduction
Thank you for your purchase of an AcraDyne® HT Series Electric Transducerized Nutrunner. These Nutrunners deliver true, traceable Torque and Angle tightening events with data recording abilities delivered by the connected AcraDyne Controllers.
A complete tool system consists of the following items:

Controller

Power cord

Tool

Tool Cable
Not to exceed 20M in length

Reaction Bar
Application specific

2

Safety Information
CAUTION ­ DO NOT USE THE ACRADYNE® HT NUTRUNNING SYSTEM WITHOUT FULLY READING THIS MANUAL AND HAVING A COMPLETE UNDERSTANDING OF THE CORRECT USAGE OF A HIGH TORQUE DELIVERING TOOL AND ANY ASSOCIATED REACTION BARS/ACCESSORIES.
SAVE THESE INSTRUCTIONS

1) WORK AREA
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
3) PERSONAL SAFETY
Indicates Caution is required. Failure to exercise caution and correct operating technique can result in serious personal injury, loss of limb or death.
a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
b) Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. If the maximum duty cycle of the attached tool is exceeded or the tool temperature exceeds 50° C., then the operator should wear protective hand wear (gloves).

c) Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c) This product is designed to be used in combination with the AcraDyne iEC DC tool controller for intermittent hand-held or fixtured assembly processes.

3

Operation
CAUTION IS REQUIRED. FAILURE TO EXERCISE CAUTION AND CORRECT OPERATING TECHNIQUE CAN RESULT IN SERIOUS PERSONAL INJURY, LOSS OF LIMB OR DEATH.
AcraDyne® HT Series Nutrunners are a part of a complete system including Controller, Tool Cable and Tool. Specific instructions on setup, programming and features are described in greater detail within the AcraDyne® Controller Manuals and ToolWare software manuals that are provided with those components.

AEP Pistol Model

3

2 4
1
AED Rear Mounted Pistol Model 3 5

32
Gen III 5000 Series AEN Angle Model

4

32

5

4

1

Gen IV 6000 & 7000 Series

AEN Angle Model

AEJ Axial Type Model

2 4
3

4 3 5

1

2

4

5 3 2
4

2 4

AEF Fixtured Model

3

AES Straight Model

32 4

AEF Dual Lever Model

2

4

# Part 1 Square/Hex Drive 2 Multi-Function Button 3 LED Status Lights 4 Trigger/Lever 5 Cable Connection

1
AEJ Dual Lever HTXD Model

4

Operation

Make sure that power is not turned on at the controller before making any connections to tool.
1) Connect the tool cable to the iEC controller and the tool:
AcraDyne recommends not exceeding 20m length of cable The tool cable has curved alignment tabs and slots built into the connectors at each end to ensure proper alignment and connection with the tool and controller.
Align the female connector on the cable with the male connector on the tool and insert the cable onto the tool, then slide the connector nut onto the threads on the cable and turn clockwise until hand-tight.
Align the male connector tab on the other end of the tool cable with the female slot on the controller and insert the cable into the connector, then slide the metal outer cover onto the connection threads on the controller and turn clockwise until hand-tight.
2) Multifunction Button Operation:
The tool will flash all LED lights three times when power is first turned on at the controller. After the controller finishes initializing and displays a target torque value, the multifunction button (MFB) is used to toggle the tool from clockwise mode (FWD) to counter-clockwise operation mode (REV). The MFB is the small button opposite the trigger. The MFB is user configurable in the controller software so this applies to factory default settings only.
The tool will initially start in clockwise mode and will have no LED lights turned on. If the trigger is pressed, the tool will turn on the blue LED once In Cycle Torque is reached meaning the tightening operation is underway. Pressing the MFB will cause all tool LED lights to flash. Pressing the MFB again will switch the tool back to FWD mode and will indicate this with no LED lights turned on (factory default setting). For further functionality, see the AcraDyne iEC controller manual.

3) Start Lever Operation:
To start the tool, depress the start lever. Blue LED lights will be displayed while tightening a bolt once In Cycle Torque is reached. The tool will stop automatically when it senses its target torque value or if no torque is sensed in a specified time period. After a cycle is complete, the tool will display green LED lights for a success, or red LED lights for failure to reach torque/angle. Previous cycle result will remain lit until a new cycle is started and surpasses In Cycle Torque setting.
4) Free Run Timeout (Controller Program Setting):
For tools with Catalog rated speeds below 60 RPM, it is recommended that the Free Run Timeout in the Controller DSP menu under Timeout Settings be changed to 30 seconds from the default setting of 5 seconds.

LED Light Assignment

The Buzzer and Multi-Function Button are programmable in the DSP Menu of ToolWare.

Light Color

Meaning

Green Solid

OK

Red Flashing

Torque Low

Red Solid

Torque High

Yellow Flashing Angle Low

Yellow Solid

Angle High

Blue Solid

Tool In-Cycle/Tool Armed

Blue Flashing P-Set Change thru MFB

All On Flashing Tool in Disassembly

Buzzer

Bad Assembly/Tool in Disassembly/Power Up

5

Operation

Slip Ring Models
An optional feature (AEx4Bxxxxxxx models) on AcraDyne HT Series Nutrunners is a Slip Ring that allows the Gearbox to
rotate 360 degrees in either direction related to the motor/handle assembly. This feature is useful in enabling the operator to position the reaction bar against a reactive point of sufficient structure prior to commencing tightening of the bolt. Operators MUST ensure that no hands, body parts, or other non-sufficiently structural elements are between the reaction bar and reactive point when positioning the reaction bar. Care MUST be taken to avoid tool start while positioning of the reaction bar is undertaken. Failure to practice safe reaction bar handling can result in SEVERE injury to person or damage
to tool/application.

ENSURE THAT POWER TO THE CONTROLLER IS DISCONNECTED OR PROPER LOCK OUT/TAG OUT PROCEDURES ARE BEING FOLLOWED

Gen III 5000 Series Angle Tools

· Orient the Reaction Bar so that the recess above the spline on the Reaction Bar is oriented towards the rear of the tool and any reaction foot is oriented away from the tool anvil
· Install the Reaction Bar onto the splines of the gearbox ensuring that the Reaction Bar is staying true to the splines.
· Install the Reaction Bar retaining ring/ plate onto the end of the Gearbox securing the Reaction Bar in place on the Gearbox. FAILURE TO SECURE THE REACTION BAR PROPERLY CAN RESULT IN SEVERE INJURY TO THE OPERATOR AND/OR DAMAGE TO THE TOOL/APPLICATION
· Restore power/disengage Lock Out/Tag Out and prepare for use
THE TOOL HANDLE MUST NOT BE LOCATED AGAINST AN OBJECT OR RESTRICTION DURING OPERATION OF THE TOOL TO AVOID CREATION OF A PINCH POINT. AN OEM SOURCED OR APPROVED REACTION BAR OR PROPER REACTION ABSORPTION DEVICE MUST BE IN USE AND IN GOOD CONDITION ANY TIME THE TOOL IS OPERATED. PROPER TORQUE REACTION MANAGEMENT PRACTICES MUST BE OBSERVED AT ALL TIMES. FAILURE TO UNDERSTAND AND EMPLOY SAFE OPERATING TECHNIQUES CAN RESULT IN TOOL DAMAGE, APPLICATION DAMAGE, SEVERE PERSONAL INJURY, OR DEATH

Retaining Ring

Gear Box Reaction Bar

6000 & 7000 Series Tools
Reaction Bar

Retaining Ring

Gear Box

8900 Series Tools

Y Series Tools

When ready to begin tightening:

· Swivel the reaction bar (Slip Ring Equipped Models only) into position minimizing or ideally eliminating any gap between the Reaction Bar and the Reaction Surface of the application. On Fixed Gearcase models, ensure that reaction absorption device is configured properly.
· Complete the tightening event.
6

Gen IV 6000/7000 Series Angle Tools 8000 Series Tools X Series Tools

Reaction Bar Safety
AcraDyne® HT Nutrunning Systems deliver high amounts of torque to an application in a continuous drive manner. As is the nature with all tool systems that function in this manner, high amounts of torque reaction will occur. AcraDyne® HT systems work with Reaction Bars that engage the tool with a secure spline and when used correctly counteract the natural torque reaction in use by pressing against a part detail or adjacent nut/bolt.
It is essential that these forces are understood completely by the operator and that the Reaction Bars have been chosen with the application’s specific geometry in mind.
AcraDyne® offers a range of Reaction Bars from stock and will design specific Reaction Bars to suit specific applications upon request.
It is the user’s responsibility to ensure that the correct Reaction Bar or Tool Holding Fixture is in place PRIOR to use of the AcraDyne® HT Series Nutrunner.

Reaction Bar Guidelines

Sockets

CAUTION IS REQUIRED. FAILURE TO EXERCISE CAUTION AND CORRECT OPERATING TECHNIQUE CAN RESULT IN SERIOUS PERSONAL INJURY, LOSS OF LIMB OR DEATH.
The guidelines offered below are only guidelines. Should there be any doubt as to the integrity of a proposed reaction strategy, it is strongly advised to consult with an AcraDyne® authorized representative prior to executing strategy.
Reaction force is equal to the point being applied. The magnitude of the reaction force is dependent upon the perpendicular distance between the point of reaction and the centerline of the gearbox. In other words, the greater the distance the lower force experienced. For this reason, the point of reaction should be kept as far away from the centerline of the tool gearbox as possible.

CAUTION IS REQUIRED. FAILURE TO EXERCISE CAUTION AND CORRECT OPERATING TECHNIQUE CAN RESULT IN SERIOUS PERSONAL INJURY, LOSS OF LIMB OR DEATH.
Only Impact Grade, Industrial Sockets should be used with AcraDyne® HT Series Nutrunners. Mechanic-grade chrome sockets are not to be used as they do not have sufficient structural strength required to deliver the higher torque loads that an AcraDyne® HT Series Nutrunner is capable of delivering. In addition, the use of Socket Extensions of any length are strongly discouraged as they also will experience failure to an extent where tool damage or operator injury may occur.
Pinch Point

CAUTION IS REQUIRED. FAILURE TO EXERCISE CAUTION AND CORRECT OPERATING TECHNIQUE CAN RESULT IN SERIOUS PERSONAL INJURY, LOSS OF LIMB OR DEATH.

The nature of a Reaction Bar in any continuous drive tool is to press against an object to counteract Torque Reaction as the tool is delivering Torque.

The operator must take great care to keep body parts or foreign matter clear of the area between the Reaction Bar and the surface it is reacting against.

Figure 1 ­ Safe reaction window

ANY BODY PART OR FOREIGN MATTER RESIDING IN A SPACE BETWEEN THE REACTION BAR AND THE SURFACE IT WILL REACT AGAINST WILL ENCOUNTER SIGNIFICANT FORCES THAT CAN CAUSE INJURY, LOSS OF LIMB OR DEATH.

7

Environmental & Electrical Specifications
Environmental · Operating Temperature: 0°C to 32°C · Storage Temperature: 0°C to 65°C · Humidity:
– 5% to 90% RH, Non-Condensing, for temperatures 0°C to 40°C – 5% to 60% RH, Non-Condensing, for temperatures 0°C to 65°C · Maximum Altitude of Operation: 3000m · Maximum decibel level: 77 dB(A) Electrical · Motor Type: BLDC – Motor Phase Voltage: 320 Volts Pulse DC @
Controller Supply Voltage of 120 RMS, or 320 Volts Pulse DC @ Controller Supply Voltage of 230 RMS · Duty Cycle: The nutrunner tools are intended for intermittent operation with a recommended maximum duty cycle of 25% at 80% of maximum torque capacity on a standard B-joint application Note: Actual maximum duty cycles are dependent upon several factors including: Ambient Temperature, Tool Selection, Joint Conditions, Operating Parameter Set Programming, and Operator Handling. For optimum Duty Cycle determination, please contact your authorized AcraDyne® Product Representative. · Motor Speed Setting Guidelines ­ All settings of AcraDyne HT Series Nutrunners should be made only by experienced, well-trained technicians. Tools with maximum RPM ratings of 25 RPM or lower should be set to run at the tool’s maximum rated speed. Specific application demands may require additional stages to achieve optimal results. Consult the appropriate AcraDyne Tool Controller manual for guidelines and specific information related to programming procedures and techniques.
If attempting to use tooling below 0°C, allow the system to warm up by running in a no-load state until acceptable temperatures are reached.
8

Gen 3 5000 Series HT Angle Tools

Tool Specifications

5000 Series HT DC Angle Tools

Model

Series

Torque Range

NM

FT-LB

5000 Series

Fixed Gearcase

AEN356540A

5000

135 ­ 540

AEN356910AG

5000

225 ­ 900

AEN3571000A

5000

250 ­ 1,000

AEN3571600A AEN3572600A

5000

400 ­ 1,600

5000 650 ­ 2,600

* Weight is tool only w/o Socket and Reaction Bar

100 ­ 398 166 ­ 664 184 ­ 737 295 ­ 1,180 479 ­ 1,917

Free Speed RPM
109 27.9 61 33 21

Weight * KG LB
5.95 13.1 5.5 12.2 7.39 16.3 7.57 16.7 8.40 18.5

Length

(Minus Reaction Bar)

MM

IN

Height (Minus Sq. Dr)
MM IN

Dia. MM IN

Drive IN

607

23.9 120.6 4.75 67.4 2.7 3/4

496

19.5 150.6 5.93 65.8 2.6 3/4

621

24.5 136.1 5.36 77.4 3.1 1

612

24.1

136.1 5.36 71.4 3.1 1

621

24.5 171.9 6.77 77.4 3.1 1

Sound Level dB(A)
66 66 66 66 66

Gen 4 6000 Series HT Angle Tools

6000 Series HT DC Angle Tools

Model

Series

Torque Range

NM

FT-LB

6000 Series

Fixed Gearcase

AEN4A66250B

6000

50 ­ 250

AEN4A66425B

6000

85 ­ 425

AEN4A66625B

6000

125 ­ 625

AEN4A66925B

6000

185 ­ 925

360° Swivel Gearcase

AEN4A66250B

6000

50 ­ 250

AEN4A66425B

6000

85 ­ 425

AEN4A66625B AEN4A66925B

6000

125 ­ 625

6000

185 ­ 925

* Weight is tool only w/o Socket and Reaction Bar

37 ­ 184 63 ­ 313 92 ­ 461 136 ­ 682
37 ­ 184 63 ­ 313 92 ­ 461 136 ­ 682

Free Speed RPM
188 97 64 43.2
188 97 64 43.2

Weight *

KG

LB

5.6 12.4 5.6 12.4 5.6 12.4 5.6 12.4
6.3 13.9 6.3 13.9 6.3 13.9 6.3 13.9

Length

(Minus Reaction Bar)

MM

IN

Height (Minus Sq. Dr)
MM IN

Dia. MM IN

Drive IN

417

16.4

150 5.9 67.3 2.7 3/4

417

16.4

150 5.9 67.3 2.7 3/4

417

16.4

150 5.9 67.3 2.7 3/4

417

16.4

150 5.9 67.3 2.7 3/4

417

16.4

188 7.4 67.3 2.7 3/4

417

16.4

188 7.4 67.3 2.7 3/4

417

16.4

188 7.4 67.3 2.7 3/4

417

16.4

188 7.4 67.3 2.7 3/4

Sound Level dB(A)
66 66 66 66
66 66 66 66

Gen 4 7000 Series HT Angle Tools

7000 Series HT DC Angle Tools

Model

Series

Torque Range

NM

FT-LB

Free Speed RPM

Add “DL” to Model Numbers for Dual Handles

7000 Series

360° Swivel Gearcase – Tools for Servicing Blades on Wind Turbines

AEN4B771200B(DL)

7000

240 ­ 1,200 177 ­ 885

38

AEN4B773000B(DL) 7000 600 ­ 3,000 443 ­ 2,200

15

* Weight is tool only w/o Socket and Reaction Bar

Weight *

KG

LB

Length

(Minus Reaction Bar)

MM

IN

Height (Minus Sq. Dr)
MM IN

Dia. MM IN

Drive IN

8.1 17.9

422

9.3 20.4

422

9

16.6

229 9 77.5 3.1 1″

16.6

229 9 77.5 3.1 1″

Sound Level dB(A)
66 66

Fixed Gearcase HT Tools

Tool Specifications

Pistol Type (AEP)

Rear Mounted Pistol (AED)

Straight Lever Type (AES)

Axial Type (AEJ)

Fixtured Type (AEF)

HT Fixed Gearcase Tools

Model

Approx. Approx.

Torque

Speed Weight

NM FT-LB RPM KG LB

Total Length

(incl sq. dr)

MM

IN

Dia.

Drive Sound Level

MM IN IN

dB(A)

HT Series Fixed Gearcase Models (R) = Pistol Tool with Rear Exit Cable (B) = Fixtured Model with Bottom Exit Cable

6000 Series

AE (P) 4A66250B (R) AE (D) (S) (J) (F) 4A66250B AE (P) 4A66425B (R) AE (D) (S) (J) 4A66425B AE (F) 4A66425B (B) AE (P) A66625B (R) AE (D) (S) (J) 4A66625B AE (F) 4A66625B (B) AE (P) 4A66925B (R) AE (D) (S) (J) (F) 4A66925B

250 185 425 315 625 460 925 682

315 4.6 10.5

66 2.6 0.75

P = 289 11.4

165

4.6

10.5

P(R) = 331 D = 388

13 15.3

66 2.6

0.75

S = 440 17.3

106

4.8

10.5

J = 331 F = 331

13 13

66 2.6 0.75

F(B) = 353 13.9

72 4.8 10.5

66 2.6 0.75

66 66 66 66

7000 Series

AE (F) 4A76200BB

200 148 432 5.2 11.5 313 12.3 67.3 2.7 0.75

66

P = 302 11.9

AE (P) (D) (S) (J) (F)4A771000B 1,000 738

D = 397 15.6 65 6.6 14.5 S = 453 17.8 77.5 3.1 1

66

J = 343 13.5

F = 343 13.5

P = 337 13.3

AE (P) (D) (S) (J) 4A772500B AE (F) 4A772500B (B)

2,500 1,844

25

D = 433 17.0 7.5 16.5 S = 488 19.2 77.5 3.1 1
J = 379 14.9

66

F = 379 14.9

8000 Series

AE (P) (D) (J) (F) 4A884200B1 AE (P) (D) (S) (J) (F) 4A884200B

4,200

3,100

12

11.1

24.5

P = 384 D = 480

15.1 18.9

B1 = 1 B = 1.5

66

S = 546 21.5 91.2 3.6

AE (P) (D) (J) (F) 4A885000B 5,000 3,700 9.3 11.1 24.5 J = 410 16.1

1.5

66

F = 410 16.1

AE (P) (D) (J) (F) 4A896500B AE (F) 4A896500B (B)

6,500 4,800

7

15.7

34.5

P = 438 D = 533

17.2 21

S = 599 23.6 103.8 4.1 1.5

66

AE (P) (D) (S) (J) (F) 4A898100B 8,100 6,000 5 15.7 34.5 J = 463 18.2

F = 462 18.2

* 8,100 Nm ­ 17,000 Nm models are not supported by the Gen III controller platform. The Gen IV controller platform is required.

10

360° Swivel Gearcase HT Tools

Tool Specifications

Pistol Type (AEP)

Rear Mounted Pistol (AED)

Axial Type (AEJ)

HT 360° Swivel Gearcase Tools

Model

Approx. Torque

NM

FT-LB

Approx. Speed RPM

Weight

Length (incl sq. dr)

KG LB

MM

IN

HT Series 360° Swivel Gearcase Models (R) = Pistol Tool with Rear Exit Cable

6000 Series

AE (P) 4B66250B(R) AE (D) (J) 4B66250B

250

185

315

5.3 12

AE (P) 4B66425B(R) AE (D) (J) 4B66425B
AE (P) 4B66625B(R) AE (D) (J) 4B66625B

425

315

625

460

165

5.3

12

P = 327 12.9 P(R) = 368 14.5

106

5.5

12

D = 429 J = 369

16.9 14.5

AE (P) 4B66925B(R) AE (D) (J) 4B66925B

925

682

72

5.5 12

7000 Series AE (P) (J) 4B771000B
AE (P) (J) 4B772500B

1,000

738

2,500

1,844

65

7.3

16

P = 339 J = 381

13.4 15

25

8.2

18

P = 377 J = 418

14.8 16.5

8000 Series

AE (P) (D) (J) 4B884200B1 AE (P) (D) (J) 4B884200B

4,200

3,100

P = 422 16.6

12

11.8 26 D = 518 20.4

J = 446 17.6

AE (P) (J) 4B896500B AE (P) (D) (J) 4B898100B* AE (P) 4B998100B*

6,500

4,800

8,100

6,000

8,100

6,000

7

16.4

36

P = 475 J = 499

18.7 19.7

P = 475 18.7

5

16.4 36 D = 571 22.5

J = 499 19.7

5

21.8 48 532

20.9

Models for Extreme Duty / Low Power Environments

Wind Series

AE (P) (J) 4W872800B

2,800

2,065

9

10.0

22

P = 406 J = 430

16 17

AE (P) (D) (J) 4W885000B1* AE (P) (D) (J) 4W885000B*

5,000

3,700

P = 422 16.6

4.5

11.8 26 D = 518 20.4

J = 446 17.6

* 8,100 Nm ­ 17,000 Nm models are not supported by the Gen III controller platform. The Gen IV controller platform is required.

Dia. MM IN
67.3 2.7
77.5 3.1
91.2 3.6 103.8 4.1 103.8 4.1 112 4.4 76 3.0 91.2 3.6

Drive IN
0.75 0.75 0.75 0.75
1
B1 = 1 B = 1.5
1.5 1.5 1.5
1 B1 = 1 B = 1.5

Sound Level dB(A)
66 66 66 66
66
66 66 66 66
66 66

11

Dual-Lever Fixed Gearcase HT Tools

Tool Specifications

HT Fixed Gearcase Dual-Lever Tools

AEP Type

AES Type

Dual Lever Model

Approx. Torque NM FT-LB

Approx. Speed RPM

Weight

KG

LB

Length (incl sq. dr)
MM IN

Dia. MM IN

HT Series Fixed Gearcase: Dual-Lever Models

For Straight Type Tools Only: (L) = Left-Side Handle (R) = Right-Side Handle

6000 Series

AE (P) (F) 4A66250BDL AE (S) 4A66250BDL (L) (R)

250

185

315

3.9

9

AE (P) (F) 4A66425BDL AE (S) 4A66425BDL (L) (R) AE (P) (F) 4A66625BDL AE (S) 4A66625BDL (L) (R)

425

315

625

460

165 106

3.9

9 P = 314 12.4

F = 331 13 67.3 2.7

4.1

9 S = 440 17.3

AE (P) (F) 4A66925BDL AE (S) 4A66925BDL (L) (R)

925

682

72

4.1

9

7000 Series

AE (P) (F) 4A771000BDL AE (S) 4A771000BDL (L) (R)

1,000 738

65

P = 324 12.7

5.9

13 F = 343 13.5 77.5 3.1

S = 453 17.8

AE (P) (F) 4A772500BDL AE (S) 4A772500BDL (L) (R)

2,500 1,844

25

P = 359 14.1

6.8

15 F = 379 14.9 77.5 3.1

S = 488 19.2

8000 Series

AE (F) 4A884200B1DL AE (F) 4A884200BDL

4,200 3,100

12

AE (F) 4A885000BDL

5,000 3,700

9.3

AE (P) (F) 4A896500BDL

6,500 4,800

7

AE (F) (J) 4A898100BDL*

8,100 6,000

5

10.4

23 410

16.1 91.2 3.6

10.4

23 410

16.1 91.2 3.6

15.0

33

P = 438 17.2 F = 462 18.2

102.4

4

15.0

33

F = 462 18.2 J = 462 18.2

102.4

4

* 8,100 Nm ­ 17,000 Nm models are not supported by the Gen III controller platform. The Gen IV controller platform is required.

Dual-Lever 360° Swivel Gearcase HT Tools

AEJ Type

Drive IN

Sound Level dB(A)

0.75

66

0.75

66

0.75

66

0.75

66

1

66

1

66

B1 = 1 B = 1.5

66

1

66

1.5

66

1.5

66

Dual-Handle Configuration

AEP Type
HT 360° Swivel Gearcase Dual-Lever Tools

AES Type

Dual Lever

Length

Approx. Torque

Approx. Speed

Weight

(incl sq. dr)

Dia.

Model

NM

FT-LB

RPM

KG

LB

MM IN MM IN

HT Series 360° Swivel Gearcase: Dual-Lever Models

6000 Series AE (P) (F) 4B66250BDL AE (S) 4B66250BDL (L) (R) AE (F) 4B66425BDL AE (S) 4B66425BDL (L) (R) AE (F) 4B66625BDL AE (S) 4B66625BDL (L) (R) AE (F) 4B66925BDL AE (S) 4B66925BDL (L) (R)

250

185

425

315

625

460

925

682

7000 Series

AE (P) (F) 4B771000BDL AE (D) 4B771000BDL (L) AE (S) 4B771000BDL (L) (R)

1,000

738

For Straight Type Tools Only: (L) = Left-Side Handle (R) = Right-Side Handle

315

4.6 10.5

165

4.6 10.5 P = 353 13.9

F = 369 14.5 67.3 2.7

106

4.8 10.5 S = 630 24.8

72

4.8 10.5

P = 361 14.2

65

6.6

14.5

F = 343 13.5 D = 438 17.2

77.5

3.1

S = 492 19.4

AE (D) 4B771800BDL (L)

1,800

1,328

28

7.5 16.5 475 18.7 77.5 3.1

AE (P) (F) 4B772500BDL AE (D) 4B772500BDL (L) AE (S) 4B772500BDL (L) (R) 8000 Series AE (P) (F) 4B896500BDL AE (J) 4B898100BDL*

2,500

1,844

6,500

4,800

8,100

6,000

P = 398 15.7

25

7.5

16.5

F = 379 14.9 D = 475 18.7

77.5

3.1

S = 528 20.8

5

16.4

36

P = 475 18.7 F = 499 19.7

104

4.1

5

16.4 36 499 19.7 104 4.1

* 8,100 Nm ­ 17,000 Nm models are not supported by the Gen III controller platform. The Gen IV controller platform is required.

12

AEJ Type

Drive IN

Sound Level dB(A)

66
66 0.75
66
66

1

66

1

66

1

66

1.5

66

1.5

66

HTXD Extreme Duty High Torque Tools

Tool Specifications

Dual J-Handle Models

Pistol Model 12,000 Nm

Fixtured Model 6,500 Nm

J-Handle Model 12,000 Nm

12,000 Nm

17,000 Nm

HT 360° Swivel Gearcase Bolting Tools for Extreme Duty

Model

Series

Approx. Torque

NM

FT-LB

Approx. Speed RPM

Weight *

KG

LB

AEJ = J Handle/Axial Type AEP = Pistol Type AEF = Fixtured Type Single-Handle Models Standard. Add “DL” to Model Numbers for Dual Handles (AEJ models only)

Fixed Gearcase

AEF4A996500B

9000

6,500

4,800

5.8

19 42

360° Swivel Gearcase

AEP4W998100B

9000

8,100

6,000

2.3

21.8 48

AEJ4W998100B

9000

8,100

6,000

2.3

21.8 48

AEJ4U998100BDL

9000

8,100

6,000

2.3

21.8 48

AEP4W9X12000B

9X

12,000 8,850

2

31.8 70

AEJ4W9X12000B

9X

12,000 8,850

2

31.8 70

AEJ4U9X12000BDL

9X

12,000 8,850

2

31.8 70

AEP4W9Y17000B

9Y

17,000 12,500

1

42.6 94

AEJ4W9Y17000B

9Y

17,000

AEJ4U9Y17000BDL

9Y

17,000

* Weight is tool only w/o Socket and Reaction Bar

12,500 12,500

1

42.6 94

1

42.6 94

Length (incl sq. dr)

MM

IN

494

19.5

544

21.4

544

21.4

427

16.8

572

22.5

572

22.5

441

17.4

381

15

381

15

458

18

Dia. MM IN

Drive IN

Sound Level dB(A)

104 4.1

1.5

66

104 4.1

1.5

66

104 4.1

1.5

66

104 4.1

1.5

66

131 5.2

1.5

66

131 5.2

1.5

66

131 5.2

1.5

66

153 6.0 2.5

66

153 6.0 2.5

66

153 60

2.5

66

13

Accessories

ACCESSORIES
Custom accessories are available for your application; contact an AIMCO Customer Service Associate for details, 1-503-254-6600, or toll free 1-800-852-1368.

Swivel Handle

Swivel Bail

Hoist Ring

REACTION BARS
HT tool includes a standard, spline attachment reaction device. Custom reaction devices are available. Contact an AIMCO Customer Service Associate for more details, 1-503254-6600, or toll free 1-800-852-1368.

Fixed Handle

Fixed Handle with Hoist Ring

Single Ended Flat Single Ended Offset

Model
26810 26800 25277 27255 30303
26815 26885 27200 26890 25274 25275 26840 30306 31273

Description
6000 Series 7000 Series 8000 Series 9000 Series X Series
2.375″ Offset, 6000 Series 4.00″ Offset, 6000 Series 3.10″ Offset, 7000 Series 4.00″ Offset, 7000 Series 3.35″ Offset, 8000 Series 4.00″ Offset, 8000 Series 3.35″ Offset, 9000 Series 5.00″ Offset, X Series 5.00″ Offset, Y Series

Double Ended Flat

26830 26820 25278

6000 Series 7000 Series 8000 Series

25276 Double Ended Offset

3.35″ Offset, 8000 Series

14

Model
26477 26327 25287 26630 26478 26328 25291 26479 26332 25289 26336 26337 28514 28549 27045 30300

Description
Swivel Bail, 6000 Series Swivel Bail, 7000 Series Swivel Bail, 8000 Series Swivel Bail, 8000/9000 Series Tools Swivel D-Handle, 6000 Series Swivel D-Handle, 7000 Series Swivel D-Handle, 8000 Series Stationary Bail, 6000 series (26336 handle not included) Stationary Bail, 7000 series (26336 handle not included) Stationary Bail, 8000 series (26336 handle not included) Fixed Handle (for use with 26479, 26332, 25289) Rear Fixed Hoist Ring, 6000/7000/8000 Series Pistols Rear Folding Hoist Ring Kit for 8000 Series Pistols Sliding Spindle, 6000 Series Sliding Spindle, 7000 Series Sliding Spindle, 8000 Series

HEAVY DUTY WATER-RESISTANT CASE FOR HT TOOLS

Case with molded foam insert

Made of ultra high-strength polypropylene copolymer resin, this water resistant utility case protects AcraDyne HT tools.
· Molded-in hinge, trigger-release latch system, and snap-down cushion grip handle
· Resistance to UV, solvents, corrosion, and impact damage

Model

Compatible Tools

Description

CC-6000-F 6000 series Case with molded foam insert

CC-6000-FIP 6000 series Case with foam in place

CC-7000-F 7000 series Case with molded foam insert

CC-7000-FIP 7000 series Case with foam in place

CC-8000-F 8000 series Case with molded foam insert

CC-8000-FIP 8000 series Case with foam in place

Please contact an AIMCO Customer Service Associate for details, 1-503-254-6600, or toll free 1-800-852-1368.

Accessories

CABLE ASSEMBLIES
The AcraDyne DC electric nutrunner tool system uses a single cable to carry all necessary conductors for superior ergonomics and durability.

24330 Standard Tool Cable

· Flexible polyurethane cover for maximum durability, abrasion and transmission fluid resistant
· Quick disconnects at both ends facilitate tool changeover and troubleshooting
· The CAN data/signal is via RJ45 for products such as the KDM socket tray or computer

Model Description Tool Cables 24330 G3/G4 Tool Cable 3M 25350 G3/G4 Tool Cable 5M 24320 G3/G4 Tool Cable 10M Extensions 24320 Extension cable 10M 25518 Extension cable 20M

BREAKAWAY CABLE CONNECTOR

Innovative Quick Disconnect Device reduces cable damage from dropping tools or pulling cables when in use.

25491 Breakaway Cable Connector

· Easily snaps into place, using magnetic force, at either the tool or the controller

· Adjust holding force by removing or adding magnets. Max holding force is 40 lbs / 18 kg

Controller connection

Tool connection

Length M Ft
3 9.8 5 16.4 10 32.8
10 32.8 20 65.6

Recommended Maintenance
Any service or preventative maintenance must be done by a trained technician or AcraDyne Authorized Service Center · The tool gear train should be cleaned, inspected and re-greased every 25,000 tightening cycles · Parts should be inspected for wear and any worn parts should be replaced · In addition to this service, it is recommended that the tool should have its calibration checked at least annually or every 50,000 tightening cycles, whichever comes first.

15

AIMCO Limited Warranty

NEW TOOL AND ACCESSORY WARRANTY
Any new tool or accessory branded with the AIMCO, Uryu, AcraDyne or Eagle Group name, and purchased from AIMCO, or through one of its authorized distributors or agents, is warranted to the original buyer against defects in materials and workmanship for a period of one (1) year* from date of delivery. Under the terms of this warranty, AIMCO agrees, without charge, to repair or replace, at its option and Ex-Works (EXW) its authorized service centers, any product or accessory warranted hereunder proving to AIMCO’s satisfaction to be defective as a result of defective workmanship or material. In order to qualify for this warranty, written notice to AIMCO must be given immediately upon discovery of such defect, at which time AIMCO will issue an authorization to return the tool. The defective item must be promptly returned to an authorized AIMCO service center with all freight charges prepaid.
REPAIRED TOOL WARRANTY
Once a tool is beyond the new product warranty period as detailed above, AIMCO will provide repair subject to the following warranty periods: pneumatic tools: 90 days*; electric tools and Acra-Feed: 90 days; battery tools: 30 days*; DC Electric tools: 90 days*
EXCLUSION FROM WARRANTY
This warranty is valid only on products purchased from AIMCO, or through its authorized distributors or agents. AIMCO shall have no obligation pursuant to the AIMCO Warranty with respect to any tools or accessories which in AIMCO’s sole judgment have been altered damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer, or any other person other than an authorized representative of AIMCO, has made any attempt to service or modify the tool or accessory prior to its return to AIMCO under this Warranty.
The warranty provision with respect to each such product may be amended by AIMCO from time to time in its sole discretion. The liability of AIMCO hereunder shall be limited to replacing or repairing, at its option, any defective products which are returned freight pre-paid to AIMCO or, at AIMCO’s option, refunding the purchase price of such products.

AIMCO reserves the right to make periodic changes in construction or tool design at any time. AIMCO specifically reserves the right to make these changes without incurring any obligation or incorporating such changes or updates in tools or parts previously distributed.
THE AIMCO WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND AIMCO EXPRESSLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY SETS FORTH THE SOLE AND EXCLUSIVE REMEDY IN CONTRACT, TORT, STRICT LIABILITY, OR OTHERWISE.
THIS WARRANTY IS THE ONLY WARRANTY MADE BY AIMCO WITH RESPECT TO THE GOODS DELIVERED HEREUNDER, AND MAY BE MODIFIED OR AMENDED ONLY BY A WRITTEN INSTRUMENT SIGNED BY A DULY AUTHORIZED OFFICER OF AIMCO.
LIMITATION OF LIABILITY AIMCO’S LIABILITY PURSUANT TO WARRANTY OF THE PRODUCTS COVERED HEREUNDER IS LIMITED TO REFUND OF THE PURCHASE PRICE. IN NO EVENT SHALL AIMCO BE LIABLE FOR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS BY THE BUYER. IN NO EVENT SHALL AIMCO BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL OR OTHER DAMAGES (INCLUDING WITHOUT LIMITATION, LOSS OF PROFIT) WHETHER OR NOT AIMCO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS, HOWEVER CAUSED, WHETHER FOR BREACH OR REPUDIATION OF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE OR OTHERWISE. THIS EXCLUSION ALSO INCLUDES ANY LIABILITY WHICH MAY ARISE OUT OF THIRD PARTY CLAIMS AGAINST BUYER. THE ESSENTIAL PURPOSE OF THIS PROVISION IS TO LIMIT THE POTENTIAL LIABILITY OF AIMCO ARISING OUT OF THIS AGREEMENT AND/OR SALE.
NOTE: The AIMCO Warranty confers specific legal rights, however some states or jurisdictions may not allow certain exclusions or limitations within this warranty. *Note ­ All warranty periods addressed herein are determined using a standard shift, eight-hour work day.

CORPORATE HEADQUARTERS 10000 SE Pine Street Portland, Oregon 97216 Phone: (503) 254­6600 Toll Free: 1-800-852-1368
16

AIMCO CORPORATION DE MEXICO SA DE CV

Ave. Cristobal Colon 14529

Chihuahua, Chihuahua. 31125

Mexico

Phone: (01-614) 380-1010 Fax: (01-614) 380-1019

LIT-MAN-G4-HT Rev. 02-20-24 ©2024 AIMCO

Documents / Resources

AcraDyne Gen 4 HT Series Gen IV High Torque Series DC Nutrunner [pdf] Instruction Manual
Gen 4 HT Series Gen IV High Torque Series DC Nutrunner, Gen 4 HT Series, Gen IV High Torque Series DC Nutrunner, Torque Series DC Nutrunner, Series DC Nutrunner

References

Leave a comment

Your email address will not be published. Required fields are marked *