Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-logo

Kenwood KMR-D378BT Marine/Motorsports CD AM/FM Radio, Bluetooth

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-imgg

Specifications

  • Product Dimensions
    9.5 x 9 x 4 inches
  • Item Weight
    3.1 pounds
  • Connectivity Technology
    Bluetooth, USB
  • Supported Internet Services
    SiriusXM
  • Compatible Devices
    Smartphone, Speaker
  • Control Method
    Remote
  • Audio Output Type
    Speakers
  • Controller Type
    Amazon Alexa
  • Format
    WAV
  • Brand
    Kenwood

Introduction

With Kenwood’s KMR-D378BT Marine CD Receiver, you may listen to your favorite music while making and receiving calls wirelessly. Built-in Bluetooth (version 4.2) allows you to connect up to five devices simultaneously. You can play music, listen to audiobooks, operate smart home devices, receive directions, and more with Alexa Built-in. Install the Alexa app on your smartphone (iOS or Android) and tap the receiver’s dedicated “Alexa” button.

The KMR-D378BT supports Spotify and Pandora music streaming, as well as CDs, CD-Rs, CD-RW discs, and USB devices. Add a SiriusXM tuner to the receiver (available separately) and listen to music, sports, and news on the radio. Features a 13-band EQ for fine-tuning, Sound Reconstruction Technology to recover acoustic characteristics in compressed recordings, a low-pass filter, sub level control, and a speaker size selection to accommodate various speaker sizes and kinds.

SOFTWARE LICENSE AGREEMENT

The software embedded in the Product (hereinafter the “Licensed Software”) provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement. This Agreement shall be deemed completed at the time the User (hereinafter the “User”) initially used the Product in which the “Licensed Software” is embedded. The Licensed Software may include the software which has been licensed to the Licensor directly or indirectly from any third party. In such cases, some third parties require the Users to follow their conditions for use separately from this Software License Agreement. Such software shall not be subject to this Agreement, and the Users are urged to read the “Important Notice concerning the Software” to be provided separately below.

General Provision
The Licensor shall grant to the User a non-exclusive and non-transferable (other than the exceptional case referred to in Article 3, Paragraph 1) licensed to use the Licensed Software within the country of the User. (the country where the User bought the Product (hereinafter the “Country”)

Article 2 

License

  1. The license granted under this Agreement shall be the right to use the Licensed Software in the Product.
  2. The User shall not duplicate, copy, modify, add, translate or otherwise alter, or lease the Licensed Software and any related documents, whether in whole or in part.
  3. The use of the Licensed Software shall be limited to personal purpose, and the Licensed Software shall not be distributed, licensed or sub-licensed whether it is for commercial purpose or not.
  4. The User shall use the Licensed Software according to the directions described in the operation manual or help file, and is prohibited to use or duplicate any data in a manner violating the Copyright Law or any other laws and regulations by applying whole or a part of the Licensed Software.

Article 3  

Conditions for Grant of License

  1. When the User transfers the Product, it may also transfer the license to use the Licensed Software embedded in the Product (including any related materials, updates, and upgrades) on the condition that no original, copies or related materials continue in the possession of the User, and that the User shall cause the transferee to comply with this Software License Agreement.
  2. The User shall not carry out reverse engineering, disassembling, decompiling or any other code analysis works in connection with the Licensed Software.

Article 4 

Right pertaining to the Licensed Software

Any and all copyrights and other rights pertaining to the Licensed Software and related documents shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or sublicenses for the Licensed Software (hereinafter the “Original Rightholder”), and the User shall not be entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any related documents.

Article 5

Indemnification of Licensor

  1.  Neither the Licensor nor the Original Rightholder shall be liable for any damage incurred by the User or any third party due to the exercise of the license granted to the User under this Agreement unless otherwise restricted by law.
  2.  The Licensor will offer no guarantee for the merchantability, convertibility, and consistency with the certain objectives of the Licensed Software.

Article 6 

Liability to Third Party

If any dispute has arisen with any third party due to an infringement upon copyright, patent, or any other intellectual property right that was caused by the User’s use of the Licensed Software, the User shall settle such dispute at its own cost and hold the Licensor and the Original Rightholder harmless from any inconvenience it may cause.

Article 7

Confidentiality

The User shall keep the confidentiality of such portion of the Licensed Software, related documents thereof or any other information to be granted under this Agreement, as well as the conditions of this Agreement as has not yet entered the public domain, and shall not disclose or divulge the same to any third party without approval of the Licensor.

Article 8 

Termination

In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event:

  1.  when the User violated any provision of this Agreement; or
  2.  when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.

Article 9 

Destruction of the Licensed Software

If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed Software, any related documents and copies thereof within two (2) weeks from such date of termination.

Article 10 

Protection of Copyright

  1. The copyright and all the other intellectual property rights relating to the Licensed Software shall belong to the Licensor and the Original Rightholder, and in no event shall they be under the ownership of the User.
  2. The User shall, whenever it uses the Licensed Software, comply with any laws relating to the copyright and other intellectual property rights.

Article 11 

Export Restriction

  1.  It is prohibited to export the Licensed Software and any related documents outside the country of the User (including transmission thereof outside the country of the User via the Internet of other communication tools).
  2.  The User shall understand that the Licensed Software shall be subject to the export restrictions adopted by the country of User and any other countries.
  3.  The User shall agree that the software will be subject to any and all applicable international and domestic laws (including the export control regulation of the country of User and
    any other countries, and any restrictions concerning the end-users, the use by end-users and importing countries to be provided by the country of User and any other countries, and any other governmental authorities).

Article 12 

Miscellaneous

  1.  In the event any part of this Agreement is invalidated by operation of law, the residual provisions shall continue in force.
  2.  Matters not stipulated in this Agreement or any ambiguity or question raised in the construction of this Agreement shall be provided or settled upon good-faith consultation between the Licensor and the User.
  3.  The Licensor and the User hereby agree that this Agreement is governed by the laws of Japan, and any dispute arising from and relating to the rights and obligations under, this Agreement shall be submitted to the exclusive jurisdiction of the Tokyo District Court for its first instance.

Important Notice concerning the Software

Copyright (c) 2009-2012 Petri Lehtinen <petri@digip.org>
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES, OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT, OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

BEFORE USE

IMPORTANT

  • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe the Warnings and Cautions in this manual.
  •  Please keep the manual in a safe and accessible place for future reference.

WARNING

  • Do not operate any function that takes your attention away from safe driving.
  • Do not ingest the battery, Chemical Burn Hazard.
  • The remote control supplied with this product contains a coin/button cell battery.
  • If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
  • Keep new and used batteries away from children.
  • If the battery compartment does not close securely, stop using the product and keep it away from children.
  • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Caution

Volume setting:

  •  Adjust the volume so that you can hear sounds outside the car to prevent accidents.
  •  Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

  •  Avoid using the external device if it might hinder safe driving.
  •  Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.
  •  Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.
  •  If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.
  •  USB rating is indicated on the main unit. To view, detach the faceplate. (Page 3)
  • Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected

Remote control (RC-406):

  • Do not leave the remote control in hot places such as on the dashboard.
  • The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.
  • The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

How to read this manual

  • Operations are explained mainly using buttons on the faceplate of KDC X303
  • English indications are used for the purpose of explanation. You can select the display language from the [FUNCTION] menu. (Page 5)
  • [XX] indicates the selected items.
  • (Page XX) indicates references are available on the stated page.

BASICS

Faceplate

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-1

 

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-2

To On the faceplate On the remote control
Turn on the power Press BSRC.

•   Press and hold to turn off the power.*2

Press and hold SRC to turn off the power.

( Pressing SRC does not turn on the power. )

Adjust the volume Turn the volume knob. Press VOL      or VOL  .

•   Press and hold VOL    to continuously increase the volume to 15.

Press ATT during playback to attenuate the sound.

•   Press again to cancel.

Select a source Press BSRC repeatedly. Press SRC repeatedly.
Change the display information*3 Press DISP repeatedly. (Page 33, 34) ( Not available )

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-43

GETTING STARTED

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-5

Select the display language and cancel the demonstration

When you turn on the power for the first time (or [FACTORY RESET] is set to [YES], see page 5), the display shows: “SEL LANGUAGE”  “PRESS”  “VOLUME KNOB”

  1. Turn the volume knob to select [ENG] (English) or [SPA] (Spanish), then press the knob. [ENG] is selected for the initial setup. Then, (except for ) the display shows: “CANCEL DEMO”  “PRESS”  “VOLUME KNOB”.
  2. Press the volume knob again. [YES] is selected for the initial setup.
  3. Press the volume knob again. “DEMO OFF” appears.

Set the clock and date

  1. Press the volume knob to enter [FUNCTION].
  2. Turn the volume knob to select [CLOCK], then press the knob.
    To adjust the clock
  3. Turn the volume knob to select [CLOCK ADJUST], then press the knob.
  4.  Turn the volume knob to make the settings, then press the knob. Hour  Minute
  5. Turn the volume knob to select [CLOCK FORMAT], then press the knob.
  6.  Turn the volume knob to select [12H] or [24H], then press the knob.
    To set the date
  7. Turn the volume knob to select [DATE FORMAT], then press the knob.
  8.  Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob.
  9.  Turn the volume knob to select [DATE SET], then press the knob.
  10.  Turn the volume knob to make the settings, then press the knob. Day  Month  Year or Month  Day  Year
  11. Press and hold to exit. To return to the previous setting item, press the search button.

Set the initial settings

  1.  Press B SRC repeatedly to enter STANDBY.
  2.  Press the volume knob to enter [FUNCTION].
  3.  Turn the volume knob to select an item (see the following table), then press the knob.
  4.  Repeat step 3 until the desired item is selected or activated.
  5.  Press and hold to exit.

To return to the previous setting item, press the search.

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-6

[DISPLAY]
[EASY MENU]        (For                      /                              /                        /

)

When entering [FUNCTION]…

[ON]: [ZONE 1] illumination changes to white color. ;

[OFF]: [ZONE 1] illumination remains as [COLOR SELECT] color. (Page 29)

•     [ZONE 2] illumination changes to light blue color when you enter

[FUNCTION], irregardless of the [EASY MENU] setting.

•     Refer to the illustration on page 28 for zone identification.

[TUNER SETTING]
[PRESET TYPE]     [NORMAL]: Memorizes one station for each preset button in each band (FM1/FM2/FM3/AM). ; [MIX]: Memorizes one station or SiriusXM channel for each preset button, regardless of the selected band or SiriusXM channel.
[SYSTEM]
[KEY BEEP]            [ON]: Activates the keypress tone. ; [OFF]: Deactivates.
[SOURCE SELECT]
[PANDORA SRC]     [ON]: Enables PANDORA/PANDORA BT in source selection. ; [OFF]: Disables. (Page 11)
[IHEART SRC]      [ON]: Enables IHEARTRADIO in source selection. ; [OFF]: Disables. (Page 12)
[SPOTIFY SRC]      [ON]: Enables SPOTIFY/SPOTIFY BT in source selection. ; [OFF]: Disables. (Page 13)
[BUILT-IN AUX]       [ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 10)
[CD READ]            [1]: Automatically distinguishes between audio file disc and music CD. ; [2]: Forces to play as a music CD. No sound can be heard if an audio file disc is played.
[USER S.REMO]      (For                                 )

See page 30 for details.

[F/W UPDATE]
[UPDATE SYSTEM]
[F/W UP xxxx]  [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not activated).

For details on how to update the firmware, visit

<www.kenwood.com/cs/ce/>.

[FACTORY RESET]    [YES]: Resets the settings to default (except the stored station). ;

[NO]: Cancels.

[CLOCK]
[CLOCK DISPLAY]    (Except for                              ) [ON]: The clock time is shown on the display even when the unit is turned off. ; [OFF]: Cancels.
[ENGLISH] Select the display language for [FUNCTION] menu and music information if applicable.

By default, [ENGLISH] is selected.

[ESPANOL]

Register the marine remote ID (for KMR-D375BT)
Applicable only when you connect the KENWOOD Marine Remote Control unit (KCA-RC55MR, optional accessory) to this unit.

  •  For connection, see “Connecting external components” on page 41.
  •  Refer also to the supplied instruction manual of the KENWOOD Marine Remote Control unit for more information.

Preparation:
Press B SRC repeatedly to enter STANDBY, then press the volume knob to enter [FUNCTION].

  1.  Turn the volume knob to select an item, then press the knob. [SYSTEM] [REM SETTING] [REMOTE ID SET] Remote control ID list is displayed.
    [YES] indicates that this ID is already registered.
    [NO] indicates that this ID is available.
  2. Turn the volume knob to select an available ID [REM ID1]/[REM ID2]/ [REM ID3], then press the knob. “REGISTERING” appears on the display window. To register, on the KENWOOD Marine Remote Control unit:
    Press ENTER to register as [REM ID1].
    Press SRC to register as [REM ID2].
    Press DISP to register as [REM ID3].
    Once the ID is registered, “COMPLETED” appears.

To delete the registered ID

  1.  Turn the volume knob to select an item, then press the knob. [SYSTEM] [REM SETTING] [REMOTE ID DEL]
  2.  Turn the volume knob to select the ID to delete [ID1 DELETE]/[ID2 DELETE]/ [ID3 DELETE], then press the knob.
  3.  Turn the volume knob to select [YES] to delete the selected ID, and select [NO] to cancel.
    To exit, press and hold the search button
    To return to the previous setting item, press search button.

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-9

  • “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
  •  The unit switches to an FM alarm automatically when receiving an alarm signal from an FM broadcast.

Search for a station

  1. Press B SRC repeatedly to select RADIO.
  2. Press BAND repeatedly (or press #FM+/*AM– on the remote control) to select FM1/FM2/FM3/AM.
  3. Press S / T (or press S / T (+) on the remote control) to search for a station.

You can store up to 18 stations for FM and 6 stations for AM.

  • To store a station: Press and hold one of the number buttons (1 to 6).
  • To select a stored station: Press one of the number buttons (1 to 6) (or press one of the number buttons (1 to 6) on the remote control).

Direct Access Tuning (using the remote control)

  1. Press DIRECT to enter Direct Access Tuning.
  2. Press the number buttons to enter a station frequency.
  3. Press ENT IW to search for a station.
  • To cancel, press or DIRECT.
  • If no operation is done for 10 seconds after step 2, Direct Access Tuning is automatically canceled.

RADIO

Other settings

  1. Press the volume knob to enter [FUNCTION].
  2. Turn the volume knob to select an item (see the following table), then press the knob.
  3. Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item.
  4. Press and hold to exit.

To return to the previous setting item, press search button.

[TUNER SETTING]
[SEEK MODE] Selects the searching method for S / T buttons when pressed. [AUTO1]: Automatically search for a station. ; [AUTO2]: Search for a preset station. ; [MANUAL]: Manually search for a station.
[AUTO MEMORY] [YES]: Automatically starts memorizing 6 stations with good reception. ;

[NO]: Cancels.

•     Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 5)

[MONO SET] [ON]: Improves the FM reception, but the stereo effect will be lost. ;

[OFF]: Cancels.

[NEWS SET] (For                               ) [ON]: The unit will temporarily switch to News Programme if available. ;

[OFF]: Cancels.

[REGIONAL] (For                               ) [ON]: Switches to another station only in the specific region using the “AF” control. ; [OFF]: Cancels.
[AF SET] (For                               ) [ON]: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor. ; [OFF]: Cancels.
[TI] [ON]: Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up). ; [OFF]: Cancels.
[PTY SEARCH] (For                      /                              /                             /                        /

/                        /                              )

Select the available Program Type (for Radio Broadcast Data System, see page 32), then press S / T to start.

(For )

Turn the volume knob to select the available Program Type (for Radio Data System, see page 32), then press the knob.

Turn the volume knob to select the PTY language ([ENGLISH]/

[FRENCH]/[GERMAN]), then press the knob.

Press S / T to start searching.

[CLOCK]
[TIME SYNC] [ON]: Synchronizes the unit’s time to the Radio Broadcast Data System/ Radio Data System station time. ; [OFF]: Cancels.
  • [MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[TI]/[PTY SEARCH] is selectable only when the band is FM1/FM2/FM3.
  • If the volume is adjusted during reception of traffic information or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information or news bulletin is turned on.

CD/USB/iPod/ANDROID

Start playback

The source changes automatically and playback starts. CD

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-12

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-13

To On the faceplate On the remote control
Play back/pause Press 6 IW. Press ENT IW.
Reverse/Fast-forward*4 Press and hold S / T. Press and hold S / T (+).
Select a track/file Press S / T. Press S / T (+).
Select a folder*5 Press 2     / 1  . Press #FM+/ AM–.
  1.  KCA-iP102: 30-pin type, KCA-iP103: Lightning type
  2.  Do not leave the cable inside the car when not used.
  3.  You can control the Android device using the Android device itself via other media player applications installed in the Android device.
  4.  Not applicable for ANDROID.
  5.  For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ANDROID.
  6.  For iPod: Applicable only when [MODE OFF] is selected. (Page 9)
  7.  For CD: Only for MP3/WMA/AAC files.

Select music drive

While in the USB source, press 5 repeatedly.
Stored songs in the following drive will be played back.

  •  The selected internal or external memory of a smartphone (Mass Storage Class).
  •  The selected drive of a multiple drive device.

Settings to use KENWOOD Remote application

KENWOOD Remote application is designed to control the KENWOOD car receiver’s operations from the iPhone/iPod (via USB input terminal).

  • For KDCX303 KDC BT375U KDCBT33 KMR D375BT indicator on the display window lights up when the KENWOOD Remote application is connected.

Preparation

  •  Install the latest version of the KENWOOD Remote application on your device before connecting.
  •  For more information, visit <www.kenwood.com/cs/ce/>

You can make the settings in the same way as connection via Bluetooth. (Page 23)

Listen to TuneIn Radio/TuneIn Radio Pro
While listening to TuneIn Radio or TuneIn Radio Pro, connect the iPod/iPhone to the USB input terminal of the unit. The unit will output the sound from these applications.

Select-control mode

While in iPod USB source (or iPod BT source), press 5 repeatedly.

[MODE ON]: Control iPod using the iPod itself. However, you can still perform play/pause, file skip, fast-forward or fast-reverse from this unit.
[MODE OFF]: Control iPod from this unit.

Select a file from a folder/list

For iPod, applicable only when [MODE OFF] is selected.

  1.  Press SEARCH BUTTON
  2.  Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.

Quick search (applicable only for CD and USB sources)
If you have many files, you can search through them quickly.
Turn the volume knob quickly to browse through the list quickly.

Skip search (applicable only for iPod USB source or iPod BT source) Press froward or backward to search at a preset skip search ratio. (Page 10)

  • Pressing and holding S / T searches at a 10% ratio.

Alphabet search (applicable only for iPod USB source or iPod BT source) You can search for a file according to the first character.

  1. Turn the volume knob quickly to enter the character search.
  2. Turn the volume knob to select the character.
    Select  *  to search for a character other than A to Z, 0 to 9.
  3.  Press forward /backward to move to the entry position.
    You can enter up to 3 characters.
  4.  Press the volume knob to start searching.
  • To return to the root folder/first file/top menu, press 5. (Not applicable for BT AUDIO source.)
  • To return to the previous setting item, press search button
  • To cancel, press and hold search button.

Direct Music Search (using the remote control)

  1.  Press DIRECT.
  2.  Press the number buttons to enter a track/file number.
  3.  Press ENT IW to search for music.
  •  To cancel, press or DIRECT.
  •  Not available if Random Play is selected.
  •  Not applicable for iPod USB and ANDROID source.

Other settings

  1.  Press the volume knob to enter [FUNCTION].
  2.  Turn the volume knob to select an item (see the following table), then press the knob.
  3.  Repeat step 2 until the desired item is selected or activated.
  4.  Press and hold to exit.
    To return to the previous setting item, press search button
[USB]
[MUSIC DRIVE]     [DRIVE CHANGE]: The next drive ([DRIVE 1] to [DRIVE 4]) is selected automatically and playback starts.

Repeat steps 1 to 3 to select the following drives.

[SKIP SEARCH]    [0.5%]/[1%]/[5%]/[10%]: While listening to iPod USB source (or iPod BT source), selects the skip search ratio over the total files.

AUX

Preparation

  • Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. (Page 5)

Start listening

  1. Connect a portable audio player (commercially available).

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-14

  1.  Press B SRC repeatedly to select AUX.
  2.  Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit…

  1.  Press the volume knob to enter [FUNCTION].
  2.  Turn the volume knob to select [SYSTEM], then press the knob.
  3.  Turn the volume knob to select [AUX NAME SET], then press the knob.
  4.  Turn the volume knob to select an item, then press the knob. [AUX] (default)/[DVD]/[PORTABLE]/[GAME]/[VIDEO]/[TV]
  5.  Press and hold to exit.
    To return to the previous setting item, press SEARCH BUTTON.

Pandora

Preparation
Install the latest version of the Pandora application on your device (iPhone/iPod touch), then create an account and log in to Pandora.

  • Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. (Page 5)

Start listening

  1.  Start up the Pandora application on your device.
  2.  Connect your device to the USB input terminal.
    Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-15
  3. Press B SRC repeatedly to select PANDORA. Broadcast starts automatically.

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-18

  1.  KCA-iP102: 30-pin type, KCA-iP103: Lightning type
  2.  Do not leave the cable inside the car when not used.
  3.  If thumbs down is selected, the current track is skipped.

Create and store a new station

  1. Press search button.
  2. Turn the volume knob to select [NEW STATION], then press the knob.
  3.  Turn the volume knob to select [FROM ARTIST] or [FROM TRACK], then press the knob.
    A new station is created based on the current artist or current song.
  4. Press and hold one of the number buttons (3, 4 or 5) to store.
    To select a stored station: Press one of the number buttons (3, 4 or 5).

Search for a registered station

  1. Press search button
  2.  Turn the volume knob to select an item, then press the knob.
    [SORT BY DATE]: According to the registered date
    [SORT BY A-Z]: By alphabetical order
  3. Turn the volume knob (or press J / K on the remote control) to select the desired station.
  4. Press the volume knob (or press ENT IW on the remote control) to confirm.
    To cancel, press and hold search button

Bookmark current song information

Press and hold the volume knob.
“BOOKMARKED” appears and the information is stored to your device.

  • The bookmark is available on your Pandora account but not on this unit.

Delete a station
While listening to PANDORA.

  1. Press search button.
  2. Turn the volume knob to select [STATION DEL], then press the knob.
  3. Turn the volume knob to select [SORT BY DATE] or [SORT BY A-Z], then press the knob.
  4. Turn the volume knob to select the desired station to delete, then press the knob.
  5. Turn the volume knob to select [YES], then press the knob.
  6. Press and hold to exit.
    To return to the previous setting item, press search button.

iHeartRadio

Preparation
Install the latest version of iHeartAuto application on your device (iPhone/iPod touch), then create an account and log in to iHeartRadio.

  • Select [ON] for [IHEART SRC] in [SOURCE SELECT]. (Page 5)

Start listening

  1. Start up the iHeartAuto application on your device.
  2. Connect your device to the USB input terminal.
    Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-19
  3. Press B SRC repeatedly to select IHEARTRADIO. Broadcast starts automatically
  • KCA-iP102: 30-pin type, KCA-iP103: Lightning type
  • Do not leave the cable inside the car when not used.

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-20

Search and store a station

  1. Press search button
  2. Turn the volume knob to select a category, then press the knob.
  3. Turn the volume knob (or press J / K on the remote control) to select the desired station.
    Press the volume knob (or press ENT IW on the remote control) to confirm. When a city list appears, you can search cities in alphabetical order by turning the volume knob quickly.
    To cancel, press and hold the search button.

To store a station: Press and hold one of the number buttons (3, 4, or 5).
To select a stored station: Press one of the number buttons (3, 4, or 5).

Spotify

Preparation
Install the latest version of the Spotify application on your device (iPhone/iPod touch), then create an account and log in to Spotify.

  • Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. (Page 5)

Start listening

  1. Start up the Spotify application on your device.
  2. Connect your device to the USB input terminal.

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-19

  1. Press B SRC repeatedly to select SPOTIFY. Broadcast starts automatically

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-20

  1.  KCA-iP102: 30-pin type, KCA-iP103: Lightning type
  2.  Do not leave the cable inside the car when not used.
  3.  Available for premium account users only.
  4.  This feature is available for tracks in Radio only. If thumbs down is selected, the current track is skipped.
  5.  Available for tracks in Playlists only.

Save favorite song information
While listening to the Radio on Spotify…

Press and hold the volume knob.
“SAVED” appears and the information is stored to “Your Music” or “Your Library” on your Spotify account.

To unsave, repeat the same procedure. “REMOVED” appears and the information is removed from “Your Music” or “Your Library” on your Spotify account.

Search for a song or station

  1. Press search button.
  2. Turn the volume knob to select a list type, then press the knob. The list types displayed differ depending on the information sent from Spotify.
  3. Turn the volume knob (or press J / K on the remote control) to select the desired song or station.
  4. Press the volume knob (or press ENT IW on the remote control) to confirm.
    You can browse through the list quickly by turning the volume knob quickly.
    To cancel, press and hold search button.

SiriusXM® Radio (for Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-44

Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit <www.siriusxm.com>.

Preparation
Connect the optional SiriusXM Vehicle Tuner (commercially available).

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-21 Check your Radio ID for activation.
The SiriusXM Radio ID is required for activation and can be found by tuning to Channel 0 as well as on the label found on the SiriusXM Vehicle Tuner and its packaging. The Radio ID does not include the letters I, O, S or F.

Activate the subscription.
For users in the U.S.A.:
Online: Go to <www.siriusxm.com>
Phone: Call 1-866-635-2349

For users in Canada:

Press B SRC repeatedly to select SIRIUS XM to start updating.

Start listening

  1. Press B SRC repeatedly to select SIRIUS XM.
  2. Press BAND repeatedly to select a band.
  3. Press . “ search button” lights up.
  4. Turn the volume knob to select a category, then press the knob.
    If “ALL CHANNELS” is selected, all the available channels will be shown. 5 Turn the volume knob to select a channel, then press the knob. (or)(or) Press forward/backward to search for a channel manually.
    Pressing and holding forward/backward changes the channel rapidly.

If a locked channel or a mature channel is selected, a pass code input screen appears. Enter the pass code to receive the channel. (Page 16)

Direct Access Tuning (using the remote control)

  1. Press DIRECT to enter Direct Access Tuning.
  2. Press the number buttons to enter a channel number.
  3. Press ENT IW to search for the channel.
  • To cancel, press or DIRECT.
  • If no operation is done for 10 seconds after step 2, Direct Access Tuning is automatically canceled.

SiriusXM Key mode

Press and hold the volume knob to change the key mode (channel or replay). (Default: Channel key mode)lights up when replay key mode is selected. When channel key mode is selected.

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-22

SmartFavorites and TuneStart™
User stored channels are recognized as SmartFavorite channels*. The SiriusXM Vehicle Tuner automatically buffers the broadcast content in the background.

  • SmartFavorites feature is available with SXV200 or later SiriusXM Vehicle Tuner.
  • SXV300 (and later) SiriusXM Vehicle Tuner can use all 18 stored channels as SmartFavorites. The SXV200 SiriusXM Vehicle Tuner can use 6 stored channels from the current band as SmartFavorites.

When you select a SmartFavorite channel, you can rewind and replay up to 30 minutes of any of the missed news, talk, sports or music content.

  • Playback starts from the beginning of the song if [TUNE START] is set to [ON] (page 16) for most music channels stored as a SmartFavorite.
    Press one of the number buttons (1 to 6) to select a stored channel.

TuneScan™
You can get a short preview of the songs that you have missed on each of your SmartFavorites music channels or a music channel currently tuned into.

Press and hold BAND to start scanning the first 6 seconds of the recorded music contents.

  •  To listen to the current song, press the volume knob to stop scanning. The unit continues playing the current song.
  •  To select the previous/next song, press S / T.
  •  To cancel scanning, press and hold the volume knob. Playback returns to the channel before you entered TuneScan.

SiriusXM® Radio (for Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-44

SiriusXM settings

  1.  Press the volume knob to enter [FUNCTION].
  2. Turn the volume knob to select an item (see the following table), then press the knob.
  3. Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item.
  4. Press and hold to exit.
    To return to the previous setting item, press search button.

 

[SIRIUS XM]
[SEEK MODE] Selects the tuning method for S / T buttons when pressed. [CHANNEL]: Manually search for a channel. ; [PRESET]: Search for a preset channel of the selected band.
[CHANNEL LOCK] To unlock settings:

Turn the volume knob to select a number.

Press S / T to move to the entry position.

Repeat steps 1 and 2 to enter the current pass code. (Initial pass code is 0000.)

Press the volume knob to confirm.

  [CODE SET] Turn the volume knob to select a number.

Press S / T to move to the entry position.

Repeat steps 1 and 2 to enter a new 4-digit pass code.

Press the volume knob to confirm.

Repeat steps 1 to 4 to reconfirm the pass code.

•     Make a note of the new pass code to enter channel lock settings for next time.

 

[LOCK SETTING] [MATURE CH]: Selects the SiriusXM-defined lock setting. ; [USER DEFINED]: Selects the individual channels the user wants to lock. ; [OFF]: Cancels.
[CHANNEL EDIT]*1 Turn the volume knob to select a category, then press the knob.

Turn the volume knob to select a channel you want to lock, then press the knob.

“L” appears in front of the channel number.

Press and hold                to exit.

[CHANNEL CLEAR]*1 [YES]: Clears all the locked channels. ; [NO]: Cancels.
[TUNE START]*2 [ON]: All qualified music channels in the SmartFavorites will start playback from the beginning of the song. ; [OFF]: Cancels.
[SIGNAL LEVEL] Shows the strength ([NO SIGNAL]/[WEAK]/[GOOD]/[STRONG]) of the current received signal.
[BUFFER USAGE] Shows the memory usage ([0%] to [100%]) for Replay buffer.
[SXM RESET] [YES]: Resets all SiriusXM settings to default. ; [NO]: Cancels.
  1.  Displayed only when [LOCK SETTING] is set to [USER DEFINED].
  2.  Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later that supports SmartFavorites.

BLUETOOTH®

Supported Bluetooth profiles

  •  Hands-Free Profile (HFP)
  •  Advanced Audio Distribution Profile (A2DP)
  •  Audio/Video Remote Control Profile (AVRCP)
  •  Serial Port Profile (SPP)
  •  Phonebook Access Profile (PBAP)

Supported Bluetooth codecs

  •  Sub Band Codec (SBC)
  •  Advanced Audio Coding (AAC)

 Connect the microphone

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-23

Depending on the operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit.

 Pair and connect a Bluetooth device for the first time

  1. Press B SRC to turn on the unit.
  2. Search and select the name of your receiver (“KDC-X3 ”/“KDC-BT3 ”/“KDC-BT3 /BT2 ”/ “KDC-MP3 ”/“KMR-D3 ”) on the Bluetooth device.
    “PAIRING” “PASS XXXXXX” “Device name” “PRESS” “VOLUME KNOB” appears on the display.
    For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code immediately after searchinG.
  3. Press the volume knob to start pairing.
    “PAIRING OK” appears when pairing is completed.

Once pairing is completed, Bluetooth connection is established automatically.

  • Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-44faceplate lights up.
  • Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-44: “BT1” and/or “BT2” on the display window lights up.
  1.  This unit supports Secure Simple Pairing (SSP).
  2.  Up to five devices can be registered (paired) in total.
  3.  Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. To delete the paired device, see [DEVICE DELETE] on page 21.
  4.  A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time.
    However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices. (Page 22)
  5. Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually.
  6. Refer to the instruction manual of the Bluetooth device for more information.

Auto Pairing
When you connect iPhone/iPod touch to the USB input terminal, pairing request (via Bluetooth) is automatically activated.

Press the volume knob to pair once you have confirmed the device name.
Automatic pairing request is activated only if:

  •  Bluetooth function of the connected device is turned on.
    [AUTO PAIRING] is set to [ON]. (Page 21)

BLUETOOTH — Mobile phone

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-24

Receive a call

When there is an incoming call:

  • Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-44
    ZONE 2 illuminates in green color and flashes.
  • The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. (Page 19)

During a call:

  • Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-44ZONE 1 illuminates according to the settings made for [DISPLAY] (page 29) and ZONE 2 illuminates in green color.
  • If you turn off the unit or detach the faceplate, Bluetooth is disconnected.

The following operations may differ or be unavailable depending on the connected phone.

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-45

  1. This adjustment will not affect the volume of the other sources.
  2. Press and hold VOL to continuously increase the volume to 15.
  3. Operations may vary according to the connected Bluetooth device.

Improve the voice quality
While talking on the phone…

  1.  Press the volume knob to enter [FUNCTION].
  2.  Turn the volume knob to select an item (see the following table), then press the knob.
  3.  Repeat step 2 until the desired item is selected or activated.
  4.  Press and hold to exit.
    To return to the previous setting item, press.
[MIC GAIN]          [–10] to [+10] ([–4]): The sensitivity of the microphone increases as the number increases.
[NR LEVEL]          [–5] to [+5] ([0]): Adjust the noise reduction level until the least noise is being heard during a phone conversation.
[ECHO CANCEL]    [–5] to [+5] ([0]): Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation.

Make the setting for answering a call

  1.  Press to enter Bluetooth mode.
  2.  Turn the volume knob to select [SETTINGS], then press the knob.
  3.  Turn the volume knob to select [AUTO ANSWER], then press the knob.
  4.  Turn the volume knob to select the time (in seconds) for the unit to answer the call automatically, then press the knob.[01] to [30], or select [OFF] to cancels. (Default: [OFF])
  5. Press and hold to exit.
    To return to the previous setting item, press search button,

Make a call

You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature.

  1.  Press to enter Bluetooth mode.
    “(First device name)” appears.
    If two Bluetooth phones are connected, press again to switch to the other phone. “(Second device name)” appears.
  2. Turn the volume knob to select an item (see the following table), then press the knob.
  3.  Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item.
  4.  Press and hold to exit.

To return to the previous setting item, press

[CALL HISTORY]     (Applicable only if the phone supports PBAP.)

Press the volume knob to select a name or a phone number.

•     “I” indicates call received, “O“ indicates call made, “M” indicates call missed.

•     Press DISP to change the display category (NUMBER or NAME).

•     “NO DATA” appears if there is no recorded call history or call number.

Press the volume knob to call.

 

[PHONE BOOK]    (Applicable only if the phone supports PBAP.)

Turn the volume knob quickly to enter alphabet search mode (if the phonebook contains many contacts).

The first menu (ABCDEFGHIJK) appears.

•     To go to the other menu (LMNOPQRSTUV or WXYZ1 ), press 2  / 1 .

•     To select the desired first letter, turn the volume knob or press

S / T, then press the knob.

Select “1” to search with numbers and select “ ” to search with symbols.

Turn the volume knob to select a name, then press the knob.

Turn the volume knob to select a phone number, then press the knob to call.

•    The phonebook of the connected phone is automatically transferred to the unit when pairing.

•    Contacts are categorized as: HM (home), OF (office), MO (mobile), OT (other), GE (general)

•    This unit can display only non-accent letters. (Accent letters such as “Ú” are shown as “U”.)

[NUMBER DIAL]  1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).

Press S / T to move the entry position.

Repeat steps 1 and 2 until you finish entering the phone number.

Press the volume knob to call.

(or using the remote control)

Press the number buttons (0 to 9) to enter the phone number.

Press  to call.

[VOICE]          Speak the name of the contact you want to call or the voice command to control the phone functions. (See “Make a call using voice recognition”.)
[LOW]/[MID]/[FULL]: Shows the strength of the battery.*
[NO SIGNAL]/[LOW]/[MID]/[MAX]: Shows the strength of the current received signal.*

Make a call using voice recognition

  1.  Press and hold to activate the voice recognition of the connected phone.
  2.  Speak the name of the contact you want to call or the voice command to control the phone functions.
    Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details.

Settings in memory

Store a contact in memory

You can store up to 6 contacts into the number buttons (1 to 6).

  1.  Press to enter Bluetooth mode.
  2.  Turn the volume knob to select [CALL HISTORY], [PHONE BOOK] or [NUMBER DIAL], then press the knob.
  3.  Turn the volume knob to select a contact or enter a phone number. If a contact is selected, press the volume knob to show the phone number.
  4.  Press and hold one of the number buttons (1 to 6). “STORED” appears when the contact is stored. To erase a contact from the preset memory, select [NUMBER DIAL] in step 2 and store a blank number.

Make a call from memory

  1.  Press to enter Bluetooth mode.
  2.  Press one of the number buttons (1 to 6).
  3.  Press the volume knob to call.
    “NO MEMORY” appears if there is no contact stored.

Other settings

  1.  Press the volume knob to enter [FUNCTION].
  2.  Turn the volume knob to select an item (see the following table), then press the knob.
  3.  Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item.
  4.  Press and hold to exit. To return to the previous setting item, press .
[BT MODE]
[PHONE SELECT]* Selects the phone or audio device to connect or disconnect. “ ” appears in front of the device name when connected. “  ” appears in front of the current playback audio device.
[AUDIO SELECT]*
[DEVICE DELETE] Turn the volume knob to select a device to delete, then press the knob.

Turn the volume knob to select [YES] or [NO], then press the knob.

[PIN CODE EDIT] (0000) Changes the PIN code (up to 6 digits).

Turn the volume knob to select a number.

Press S / T to move the entry position.

Repeat steps 1 and 2 until you finish entering the PIN code.

Press the volume knob to confirm.

[RECONNECT] [ON]: The unit is automatically reconnected when the last connected Bluetooth device is within the connectable range. ; [OFF]: Cancels.
[AUTO PAIRING] [ON]: The unit is automatically paired with the supported Bluetooth device (iPhone/iPod touch) when it is connected through USB input terminal. Depending on the operating system of the connected device, this function may not work. ; [OFF]: Cancels.

You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device at any time.

[INITIALIZE]            [YES]: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; [NO]: Cancels.

Bluetooth test mode
|You can check the connectivity of the supported profile between the Bluetooth device and the unit.

Make sure there is no Bluetooth device paired.

  1.  Press and hold.
    “PLEASE PAIR YOUR PHONE PIN 0000” appears on the display.
  2. Search and select the name of your receiver (“KDC-X3 ”/“KDC-BT3 ”/ “KDC-BT3 /BT2 ”/“KDC-MP3 ”/“KMR-D3 ”) on the Bluetooth device.
  3.  Operate the Bluetooth device to confirm pairing. “TESTING” flashes on the display.

The connectivity result (OK or NG) appears after the test.

PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility
PB DL: Phonebook Access profile (PBAP) compatibility

To cancel test mode, press and hold B SRC to turn off the unit.

BLUETOOTH — Audio

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-26

While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices.

Audio player via Bluetooth

  1.  Press B SRC repeatedly (or press SRC on the remote control) to select BT AUDIO.
    Pressing enters BT AUDIO directly.
  2.  Operate the audio player via Bluetooth to start playback.
To On the faceplate On the remote control
Play back/pause Press 6 IW. Press ENT IW.
Select group or folder Press 2     / 1  . Press #FM+/ AM–.
Reverse skip/ Forward skip Press S / T. Press S / T (+).
Reverse/Fast- forward Press and hold S / T. Press and hold S /

T (+).

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-27

Pressing the “Play” key on the connected device itself also causes the switching of sound output from the device. Operations and display indications may differ according to their availability on the connected device.

Settings to use KENWOOD Remote application

KENWOOD Remote application is designed to control the KENWOOD car receiver’s operations from the iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via Bluetooth).

  • Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-44 “R.APP” indicator on the display window lights up when the KENWOOD Remote application is connected.

Preparation

  •  Install the latest version of KENWOOD Remote application on your device before connecting.
  •  For more information, visit <www.kenwood.com/cs/ce/>
  1. Press the volume knob to enter [FUNCTION].
  2. Turn the volume knob to select an item (see the following table), then press the knob.
  3. Repeat step 2 until the desired item is selected or activated.
  4.  Press and hold to exit.
    To return to the previous setting item, press.
[REMOTE APP]
[SELECT]         Selects the device (IOS or ANDROID) to use the application.
  [IOS]             [YES]: Selects iPhone/iPod to use the application via Bluetooth or connected via USB input terminal. ; [NO]: Cancels.

If IOS is selected, select iPod BT source (or iPod USB source if your iPhone/iPod is connected via USB input terminal) to activate the application.

•    The connectivity of the application will be interrupted or disconnected if:

–  You change from iPod BT source to any playback source connected via the USB input terminal.

–  You change from iPod USB source to iPod BT source.

  [ANDROID]      [YES]: Selects Android smartphone to use the application via Bluetooth. ; [NO]: Cancels.

 

[ANDROID LIST]*        Selects the Android smartphone to use from the list.
[STATUS]            Shows the status of the selected device. [IOS CONNECTED]: You are able to use the application using the iPhone/ iPod connected via Bluetooth or USB input terminal. [IOS NOT CONNECTED]: No IOS device is connected to use the application. [ANDROID CONNECTED]: You are able to use the application using the Android smartphone connected via Bluetooth. [ANDROID NOT CONNECTED]: No Android device is connected to use the application.

Displayed only when [ANDROID] of [SELECT] is set to [YES].

Listen to iPhone/iPod via Bluetooth

You can listen to the songs on the iPhone/iPod via Bluetooth on this unit. Press B SRC repeatedly to select iPod BT.

  • You can operate the iPod/iPhone in the same way as iPod/iPhone via USB input terminal. (Page 8)
  • If you plug in an iPhone/iPod to the USB input terminal while listening to iPod BT source, the source automatically changes to iPod USB. Press B SRC to select iPod BT if the device is still connected via Bluetooth.

Internet radio via Bluetooth

  • You can listen to internet radio (Pandora, iHeartRadio and Spotify) on the iPhone/iPod touch/Android device via Bluetooth on this unit.
  • Make sure the USB input terminal is not connected to any device.

Listen to Pandora

Preparation
Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. (Page 5)

  1.  Startup the Pandora application on your device.
  2.  Connect your device via Bluetooth connection. (Page 17)
  3.  Press B SRC repeatedly to select PANDORA (for iPhone/iPod) or PANDORA BT (for Android device). The source switches and the broadcast starts automatically.
    You can operate Pandora in the same way as Pandora via a USB input terminal. (Page 11)

Listen to iHeartRadio

Preparation:
Select [ON] for [IHEART SRC] in [SOURCE SELECT]. (Page 5)

  1.  Startup the iHeartAuto application on your device.
  2.  Connect your device via Bluetooth connection. (Page 17)
  3. Press B SRC repeatedly to select IHEARTRADIO. The source switches and the broadcast start automatically.

You can operate iHeartRadio in the same way as iHeartRadio via USB input terminal. (Page 12)

Listen to Spotify
Preparation
Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. (Page 5)

  1.  Start up the Spotify application on your device.
  2.  Connect your device via Bluetooth connection. (Page 17)
  3.  Press B SRC repeatedly to select SPOTIFY (for iPhone/iPod) or SPOTIFY BT (for Android device). The source switches and the broadcast start automatically.
    You can operate Spotify in the same way as Spotify via USB input terminal. (Page 13)

AUDIO SETTINGS

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-28

  1.  Press the volume knob to enter [FUNCTION].
  2.  Turn the volume knob to select an item (see the following table), then press the knob.
  3.  Repeat step 2 until the desired item is selected or activated.
  4.  Press and hold to exit. (or using the remote control)
  5. Press AUD to enter [AUDIO CONTROL].
  6.  Press J/K a to select an item, then press ENT IW.

To return to the previous setting item, press search button.

[AUDIO CONTROL]
[SUB-W LEVEL] [LEVEL –50] to [LEVEL +10] ([LEVEL 0]): Adjusts the subwoofer output level.
[EASY EQ] Adjusts your own sound settings.
  •    The settings are stored to [USER] in [PRESET EQ].
  •     The settings made may affect the current settings of [MANUAL EQ].
  [SW]:  [LEVEL –50] to [LEVEL +10]             (Default: [LEVEL 0]
  [BASS]: [LEVEL –9] to [LEVEL +9]                           [LEVEL 0]
  [MID]:  [LEVEL –9] to [LEVEL +9]                           [LEVEL 0]
  [TRE]: [LEVEL –9] to [LEVEL +9]                           [LEVEL 0])
[MANUAL EQ] Adjusts your own sound settings for each source.

•    The settings are stored to [USER] in [PRESET EQ].

•    The settings made may affect the current settings of [EASY EQ].

[62.5HZ] [LEVEL]           [LEVEL –9] to [LEVEL +9] ([LEVEL 0]): Adjusts

the level to memorize for each source.

(Before making an adjustment, select the source you want to adjust.)

[BASS EXTEND] [ON]: Turns on the extended bass. ; [OFF]: Cancels.
[100HZ]/[160HZ]/ [250HZ]/[400HZ]/ [630HZ]/[1KHZ]/ [1.6KHZ]/[2.5KHZ]/ [4KHZ]/[6.3KHZ]/ [10KHZ]/[16KHZ] [LEVEL –9] to [LEVEL +9] ([LEVEL 0]): Adjusts the level to memorize for each source.

(Before making an adjustment, select the source you want to adjust.)

[Q FACTOR] [1.35]/[1.50]/[2.00]: Adjusts the quality factor.
[PRESET EQ] [NATURAL]/[ROCK]/[POPS]/[EASY]/[TOP40]/[JAZZ]/[POWERFUL]/ [USER]: Selects a preset equalizer suitable to the music genre. (Select [USER] to use the settings made in [EASY EQ] or [MANUAL EQ].)
[BASS BOOST]          [LV1] to [LV5]: Selects your preferred bass boost level. ; [OFF]: Cancels.
[LOUDNESS] [LV1]/[LV2]: Selects your preferred low or high frequencies boost to produce a well-balanced sound at low volume. ; [OFF]: Cancels.
[SUBWOOFER SET] [ON]: Turns on the subwoofer output. ; [OFF]: Cancels.
[FADER] [R15] to [F15] ([0]): Adjusts the front and rear speaker output balance.
[BALANCE] [L15] to [R15] ([0]): Adjusts the left and right speaker output balance.
[VOLUME OFFSET] [–15] to [+6] ([0]): Presets the initial volume level of each source by comparing to the FM volume level.

(Before adjustment, select the source you want to adjust.)

[SOUND EFFECT]
[SOUND RECNSTR]

(Sound reconstruction)

(Not applicable for RADIO source, AUX source and SIRIUS XM source.) [ON]: Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression. ; [OFF]: Cancels.
[SPACE ENHANCE] (Not applicable for RADIO source.) [SML]/[MED]/[LRG]: Virtually enhances the sound space. ;

[OFF]: Cancels.

[SND REALIZER] [LV1]/[LV2]/[LV3]: Virtually makes the sound more realistic. ;

[OFF]: Cancels.

[STAGE EQ] [LOW]/[MID]/[HI]: Virtually adjusts the sound position heard from the speakers. ; [OFF]: Cancels.
[DRIVE EQ] [ON]: Boosts the frequency to reduce the noise heard from outside the car or running noise of the tyres. ; [OFF]: Cancels.
[SPEAKER SIZE] The frequency and slope settings are automatically set for the crossover of the selected speaker.
[FRONT] [SIZE]           [3.5”]/[4”]/[4.75”]/[5”]/[6.5”]/[6.75”]/[7”]/[4×6]/ [5×7]/[6×8]/[6×9]/[7×10]: Selects according to the connected speaker size for optimum performance. [TWEETER]    [SMALL]/[MIDDLE]/[LARGE]: Selects according to the size range of the connected tweeter for optimum performance. ; [NONE]: Not connected.
[REAR] [3.5”]/[4”]/[4.75”]/[5”]/[6.5”]/[6.75”]/[7”]/[4×6]/[5×7]/[6×8]/ [6×9]/[7×10]: Selects according to the connected speaker size for optimum performance. ; [NONE]: Not connected.
[SUBWOOFER] [6.5”]/[8”]/[10”]/[12”]/[15” OVER]: Selects according to the connected speaker size for optimum performance. ; [NONE]: Not connected.
[X ‘ OVER]
[TWEETER] [FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/ [6.3KHZ]/[8KHZ]/[10KHZ]/[12.5KHZ]: Adjusts the

crossover frequency for the tweeter speaker.

[GAIN LEFT] [–8] to [0]: Adjusts the output volume of the left tweeter.
[GAIN RIGHT] [–8] to [0]: Adjusts the output volume of the right tweeter.
[FRONT HPF] [F-HPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/ [90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/ [220HZ]/[250HZ]: Adjusts the crossover frequency for the selected speakers (high pass filter). ; [THROUGH]: All signals are sent to the selected speakers.
[F-HPF SLOPE]  [–6DB]/[–12DB]/[–18DB]/[–24DB]: Adjusts the

crossover slope.

(Selectable only if a setting other than [THROUGH] is selected for [F – HPF FRQ].)

[F-HPF GAIN]       [–8] to [0]: Adjusts the output volume of the

selected speaker.

[REAR HPF] [R-HPF FRQ] [R-HPF SLOPE] [R-HPF GAIN] (Refer to [FRONT HPF] settings above.)
[SUBWOOFER LPF] [SW LPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/ [90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/ [220HZ]/[250HZ]: Adjusts the crossover frequency for the subwoofer (low pass filter). ; [THROUGH]: All signals are sent to the subwoofer.
[SW LPF SLOPE] [–6DB]/[–12DB]/[–18DB]/[–24DB]: Adjusts the

crossover slope.

(Selectable only if a setting other than [THROUGH] is selected for [SW LPF FRQ].)

[SW LPF          [REVERSE] (180°)/[NORMAL] (0°): Selects the

PHASE]           phase of the subwoofer output to be in line with the speaker output for optimum performance.

[SW LPF GAIN]  [–8] to [0]: Adjusts the output volume of the

subwoofer.

[DTA SETTINGS] For settings, see “Digital Time Alignment settings” on the right column.
[CAR SETTINGS]

 

• (For Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-44
The following item is selectable only if [SWITCH PREOUT] is set to [SUB-W] (page 4):

  •  [SUB-W LEVEL]
  •  [SUBWOOFER SET]
  •  [SW LEVEL] of [EASY EQ]
  •  [SUBWOOFER] of [SPEAKER SIZE]
  •  [SUBWOOFER LPF] of [X ‘ OVER]
  •  [SUBWOOFER] of [DISTANCE] and [GAIN] in [DTA SETTINGS]

• The following item is selectable only if [SUBWOOFER SET] is set to [ON] (page 25):

  •  [SUB-W LEVEL]
  •  [SW LEVEL] of [EASY EQ]
  •  [SUBWOOFER] of [SPEAKER SIZE]
  •  [SUBWOOFER LPF] of [X ‘ OVER]
  •  [SUBWOOFER] of [DISTANCE] and [GAIN] in [DTA SETTINGS]

• The following item is selectable only if a setting other than [NONE] is selected for [TWEETER], [REAR] and [SUBWOOFER] of [SPEAKER SIZE]:

  • – [TWEETER], [REAR HPF], [SUBWOOFER LPF] of [X ‘ OVER]

Digital Time Alignment settings
Digital Time Alignment sets the delay time of the speaker output to create a more suitable environment for your vehicle.

  • For more information, see “Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]” on page 28.
[DTA SETTINGS]
[POSITION] Selects your listening position (reference point).

[ALL]: Not compensating ; [FRONT RIGHT]: Front right seat ;

[FRONT LEFT]: Front left seat ; [FRONT ALL]: Front seats
[DISTANCE] [0FT] to [20.01FT]: Fine adjust the distance to compensate.

(Before making an adjustment, select the speaker you want to adjust.)

[GAIN] [–8DB] to [0DB]: Fine adjust the output volume of the selected speaker.

(Before making an adjustment, select the speaker you want to adjust.)

[DTA RESET] [YES]: Resets the settings ([DISTANCE] and [GAIN]) of the selected [POSITION] to default. ; [NO]: Cancels.
[CAR SETTINGS] Identify your car type and rear speaker location in order to make the adjustment for [DTA SETTINGS].
[CAR TYPE] [COMPACT]/[FULL SIZE CAR]/[WAGON]/[MINIVAN]/[SUV]/ [MINIVAN(LONG)]: Selects the type of vehicle. ; [OFF]: Not compensating.
[R-SP LOCATION]     Selects the location of the rear speakers in your vehicle to calculate the furthest distance from the listening position selected (reference point).

•    [DOOR]/[REAR DECK]: Selectable only when [CAR TYPE] is selected as [OFF], [COMPACT], [FULL SIZE CAR], [WAGON] or [SUV].

•    [2ND ROW]/[3RD ROW]: Selectable only when [CAR TYPE] is selected as [MINIVAN] or [MINIVAN(LONG)].

  • Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS], select the speaker you want to adjust: [FRONT LEFT]/[FRONT RIGHT]/[REAR LEFT]/[REAR RIGHT]/[SUBWOOFER]
  • You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a setting other than [NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE].
  • [R-SP LOCATION] of [CAR SETTING] is selectable only if a setting other than [NONE] is selected for [REAR] of [SPEAKER SIZE].

Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-29

If you specify the distance from the center of the currently set listening position to every speaker, the delay time will be automatically computed and set.

  1. Determines the center of the currently set listening position as the reference point.
  2.  Measures the distances from the reference point to the speakers.
  3. Calculates the differences between the distance of the furthest speaker (rear speaker) and other speakers.
  4.  Sets the [DISTANCE] calculated in step 3 for individual speakers.
  5.  Adjusts [GAIN] for individual speakers. Example: When [FRONT ALL] is selected as the listening position

DISPLAY SETTINGS

Zone identification for color settings and brightness settings

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-30

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-46

Zone identification for brightness setting

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-31

Set the dimmer
Press and hold DISP (DIM) to turn on or off the dimmer. If you have set [DIMMER TIME] (page 29), it will be canceled once you press and hold this button.

Other settings

  1.  Press the volume knob to enter [FUNCTION].
  2.  Turn the volume knob to select an item (see the following table), then press the knob.
  3.  Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item.
  4.  Press and hold to exit.
    To return to the previous setting item, press search button
[DISPLAY]
[COLOR SELECT] (For                        /                             /                         /                              )

Selects illumination colors for [ALL ZONE], [ZONE 1] and [ZONE 2]

separately.

Select a zone ([ZONE 1], [ZONE 2], [ALL ZONE]). (See the illustration on page 28.)

Select a color for the selected zone.

[INITIAL COLOR]/[VARIABLE SCAN]/[CUSTOM R/G/B]/[RED1]/[RED2]/ [RED3]/[PURPLE1]/[PURPLE2]/[PURPLE3]/[PURPLE4]/[BLUE1]/ [BLUE2]/[BLUE3]/[SKYBLUE1]/[SKYBLUE2]/[LIGHTBLUE]/[AQUA1]/ [AQUA2]/[GREEN1]/[GREEN2]/[GREEN3]/[YELLOWGREEN1]/ [YELLOWGREEN2]/[YELLOW]/[ORANGE1]/[ORANGE2]/[ORANGERED]

Default:

/                             /                        : [VARIABLE SCAN]

: [INITIAL COLOR]

 

To make your own color, select [CUSTOM R/G/B]. The color you have made will be stored in [CUSTOM R/G/B].

Press the volume knob to enter the detailed color adjustment.

Press S/T to select the color ([R]/[G]/[B]) to adjust.

Turn the volume knob to adjust the level ([0] to [9]), then press the knob.

[DIMMER]          Dims the illumination. [ON]: Dimmer is turned on. [OFF]: Dimmer is turned off. [DIMMER TIME]: Set the dimmer on and off time.

Turn the volume knob to adjust the [ON] time, then press the knob.

Turn the volume knob to adjust the [OFF] time, then press the knob. Default: [ON]: [6:00PM] ; [OFF]: [6:00AM]

[BRIGHTNESS]    1 Select a zone. (See the illustration on page 28.)

2 [LVL 00] to [LVL 31]: Set the brightness level for the selected zone.

[TEXT SCROLL]  [ONCE]: Scrolls the display information once. ; [AUTO]: Repeats scrolling at 5-second intervals. ; [OFF]: Cancels.
[LEVEL METER]  (For                      /                             /                         /                              )

[ON]: Shows the level meter on the display window (as shown below). ;

[OFF]: Cancels.

Level meter

LEARNING STEERING REMOTE CONTROL

You can control the unit with the steering remote control keys on your vehicle. After connection, you can configure the control keys according to your preference.

  •  You can only make this configuration if your vehicle is equipped with the electrical steering remote control.
  •  If the steering remote control in your car is not compatible, the configuration may not be completed and an error message may appear. (Page 35)

Make the connection

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-32

Configure the control keys

  1.  Press B SRC repeatedly to enter STANDBY.
  2.  Press the volume knob to enter [FUNCTION].
  3.  Turn the volume knob to select [SYSTEM], then press the knob.
  4.  Turn the volume knob to select [USER S.REMO], then press the knob.
  5.  Turn the volume knob to select [SET KEY], then press the knob.
    A key list of 16 assignable keys appears.
    [K## NONE]: No function has been assigned.
  6. Turn the volume knob to select any key from the key list to assign the function, then press the knob.
    “PRESS KEY TO ASSIGN K##” appears.
  7. Press and hold any control keys on your steering remote control which you want to assign.
    A list of key functions will appear on the display.
    [NONE] (default)/[ATT]/[SEEK UP]/[SEEK DOWN]/[VOL UP]/[VOL DOWN]/[MODE]/[ON HOOK]/[OFF HOOK]/[VOICE]/[ENTER
  8. Turn the volume knob to select a function to assign, then press the knob. The selected key function is assigned to the steering remote control key you have selected in step 7. The display returns to the key list as in step 5.
    [K## (Function)]: When a certain function has been assigned to a key.
  9. Repeat steps 6, 7 and 8 to assign other control keys.
  10. Press and hold to exit.

To reassign the control keys

  1. Press B SRC repeatedly to enter STANDBY.
  2.  Press the volume knob to enter [FUNCTION].
  3.  Turn the volume knob to select [SYSTEM], then press the knob.
  4.  Turn the volume knob to select [USER S.REMO], then press the knob.
  5.  Turn the volume knob to select [RESET KEY], then press the knob.
  6.  Turn the volume knob to select [YES], then press the knob.
    All the control keys will be reset. Selecting [NO] will cancel the operation.

To return to the previous setting item, press the search button.

When [FACTORY RESET] is set to [YES] (page 5), it will also reset the learning steering remote control.

 REFERENCES

Maintenance Cleaning the unit
Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Cleaning the connector
Detach the faceplate and clean the connector gently with a cotton swab. Be careful not to damage the connector.

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-33

Handling discs

  •  Do not touch the recording surface of the disc.
  •  Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
  •  Do not use any accessories for the disc.
  •  Clean from the center of the disc and move outward.
  •  Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
  •  When removing a disc from this unit, pull it out horizontally.
  •  Remove burrs from the center hole and disc edge before inserting a disc. More information

More Infromation

For: – Latest firmware updates and latest compatible item list

General

  • This unit can only play the following CDs:

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-34

 Playable files

  • Playable audio file:
    For disc: MP3 (.mp3), WMA (.wma), AAC (.aac) For USB mass storage class device:
    MP3 (.mp3), WMA (.wma), AAC (.aac), AAC (.m4a), WAV (.wav), FLAC (.flac)
  •  Playable disc media: CD-R/CD-RW/CD-ROM
  •  Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name
  •  Playable USB device file system: FAT12, FAT16, FAT32
    Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or devices.
    The AAC (.m4a) file in a CD encoded by iTunes cannot be played on this unit.

Unplayable discs

  •  Discs that are not round.
  •  Discs with coloring on the recording surface or discs that are dirty.
  •  Recordable/ReWritable discs that have not been finalized.
  •  8 cm CD. Attempting to insert using an adapter may cause malfunction.

About USB devices

  •  You cannot connect a USB device via a USB hub.
  •  Connecting a cable whose total length is longer than 5 m may result in abnormal playback.
  •  This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1.5 A.

About iPod/iPhone

  • •Via USB input terminal:
    Made for
  • iPod touch (5th and 6th generation)
  •  iPod nano (7th generation)
  •  iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X

Via Bluetooth:
Made for

  •  iPod touch (5th and 6th generation)
  •  iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X• It is not possible to browse video files on the “Videos” menu in [MODE OFF].
  1.  The song order displayed on the selection menu of this unit may differ from that of the iPod/iPhone.
  2.  You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod.
  3.  Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit.

About Android device

  •  This unit supports Android OS 4.1 and above.
  •  Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory (AOA) 2.0.
  •  If the Android device supports both mass storage class device and AOA 2.0, this unit always playback via AOA 2.0 as a priority.

About Pandora

  •  Pandora is only available in certain countries.
    For more information, visit <www.pandora.com/legal>
  •  Because Pandora is a third-party service, the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired, or some or all of the services may become unavailable.
  •  Some functions of Pandora cannot be operated from this unit.
  •  For issues using the application, please contact Pandora at <pandora-support@pandora.com>

About iHeartRadio

  •  iHeartRadio® is a third-party service, therefore the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable.
  •  Some iHeartRadio® functionality cannot be operated from this unit.

About Spotify

Spotify application supports:

  •  iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus (iOS 8 or above)
  •  iPod touch (5th and 6th generation)
  •  Android OS 4.0.3 or above
  •  Spotify is a third-party service, therefore the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable.
  •  Some functions of Spotify cannot be operated from this unit.
  •  For issues using the application, please contact Spotify at <www.spotify.com>

About Bluetooth

  •  Depending on the Bluetooth version of the device, some Bluetooth devices may not be able to connect to this unit.
  •  This unit may not work with some Bluetooth devices.
  •  Signal conditions vary, depending on the surroundings.

About Program Type
For Radio Broadcast Data System:

[SPEECH]:

  • [NEWS], [INFORM] (information), [SPORTS], [TALK], [LANGUAGE], [REL TALK] (religious talk), [PERSNLTY] (personality), [PUBLIC], [COLLEGE], [HABL ESP] (spanish talk), [WEATHER][MUSIC]:
  • [ROCK], [CLS ROCK] (classic rock), [ADLT HIT] (adult hits), [SOFT RCK] (softrock), [TOP 40], [COUNTRY], [OLDIES], [SOFT], [NOSTALGA] (nostalgia), [JAZZ], [CLASSICL] (classical), [R & B] (rhythm and blues), [SOFT R&B] (soft rhythm and blues), [REL MUSC] (religious music), [MUSC ESP] (spanish music), [HIP HOP]

For Radio Data System:[SPEECH]:

[NEWS], [AFFAIRS], [INFO] (information), [SPORT], [EDUCATE], [DRAMA], [CULTURE], [SCIENCE], [VARIED], [WEATHER], [FINANCE], [CHILDREN], [SOCIAL], [RELIGION],
[PHONE IN], [TRAVEL], [LEISURE], [DOCUMENT]

[MUSIC]:
[POP M] (music), [ROCK M] (music), [EASY M] (music), [LIGHT M] (music), [CLASSICS], [OTHER M] (music), [JAZZ], [COUNTRY], [NATION M] (music), [OLDIES], [FOLK M] (music)

The unit will search for the Program Type categorized under [SPEECH] or [MUSIC] if selected.

Change the display information

  • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg. station name) appears or display will be blank.

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-35

Source name Display information: Main display
STANDBY Source name Date back to the beginning
RADIO Frequency Date back to the beginning
For FM Radio Broadcast Data System/FM Radio Data System stations only: Station name/Program type Radio text Radio text+ Radio text+ song title/Radio text+ artist Frequency Date back to the beginning
CD or USB For CD-DA:

Disc title/Artist Track title/Artist Playing time Date back to the beginning

For MP3/WMA/AAC/WAV/FLAC files:

Song title/Artist Album title/Artist Folder name File name Playing time Date back to the beginning

iPod USB/iPod BT When [MODE OFF] is selected (page 9):

Song title/Artist Album title/Artist Playing time Date back to the beginning

Source name Display information: Main display
ANDROID Source name Date back to the beginning
PANDORA/ PANDORA BT Station name Shared/Radio Song title Artist Album title Playing time Date back to the beginning
IHEARTRADIO Station name Song title/Artist  Date  back to the beginning
SPOTIFY/ SPOTIFY BT Context title Song title Artist Album title Playing Time Date back to the beginning
SIRIUS XM Channel number Channel name Artist Song title Content information Category name Date back to the beginning
BT AUDIO Song title/Artist Album title/Artist Playing time Date back to the beginning
AUX Source name Date back to the beginning
  • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg. station name) appears or display will be blank.

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-36

Source name Display information: Main display
STANDBY Source name/Clock Clock Turns off the display* back to the beginning
RADIO Source name/Clock Frequency Clock Turns off the display* back to the beginning
For FM Radio Broadcast Data System/FM Radio Data System stations only: Source name/Clock Station name/Program type Radio text

Radio text+ Radio text+ song title/Radio text+ artist Frequency Clock Turns off the display* back to the beginning

CD or USB For CD-DA:

Source name/Clock Disc title/Artist Track title/Artist Playing time Clock Turns off the display* back to the beginning

For MP3/WMA/AAC/WAV/FLAC files:

Source name/Clock Song title/Artist Album title/Artist Folder name File name Playing time Clock Turns off the display* back to

the beginning

iPod USB/iPod BT When [MODE OFF] is selected (page 9):

Source name/Clock Song title/Artist Album title/Artist Playing time Clock Turns off the display* back to the beginning

Source name Display information: Main display
ANDROID Source name/Clock Clock Turns off the display* back to the beginning
PANDORA/ PANDORA BT Source name/Clock Station name Shared/Radio Song title Artist Album title Playing time  Clock  Turns off the display*  back to

the beginning

IHEARTRADIO Source name/Clock Station name Song title/Artist Clock Turns off the display* back to the beginning
SPOTIFY/ SPOTIFY BT Source name/Clock Context title Song title Artist Album title Playing Time Clock Turns off the display*  back to the beginning
BT AUDIO Source name/Clock Song title/Artist Album title/Artist Playing time Clock Turns off the display* back to the beginning
AUX Source name/Clock Clock Turns off the display* back to the beginning

 

TROUBLESHOOTING

Symptom Remedy
General Sound cannot be heard. •    Adjust the volume to the optimum level.

•    Check the cords and connections.

“MISWIRING CHECK WIRING     Turn the power off, then check to be sure the terminals of THEN PWR ON” appears.                the speaker wires are insulated properly. Turn the power

on again.

“PROTECTING SEND SERVICE”

appears.

Send the unit to the nearest service center.
Source cannot be selected. Check the [SOURCE SELECT] setting. (Page 5)
•     Sound cannot be heard.

•     The unit does not turn on.

•     Information shown on the display is incorrect.

Clean the connectors. (Page 31)
The unit does not work at all. Reset the unit. (Page 3)
Correct characters are not displayed. •    This unit can only display uppercase letters, numbers, and a limited number of symbols.

•    Depending on the display language you have selected (page 5), some characters may not be displayed correctly.

(For )

“SET ERROR”/“DEL ERROR”

Setting/deleting the remote control ID is unsuccessful. Turn the power off, then turn on the power and perform the operation again.(Page 5)
(For  )

“ERROR”/”FAILED”

Your steering remote controller is not compatible, learning may not be completed. Consult your car audio dealer for details.
Radio •     Radio reception is poor.

•     Static noise while listening to the radio.

Connect the antenna firmly.
Symptom Remedy
CD/USB/iPod Disc cannot be ejected. Press and hold to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit (page 3).
Noise is generated. Skip to another track or change the disc.
“PLEASE EJECT” appears. Reset the unit (page 3). If this does not solve the problem, consult your nearest service center.
Playback order is not as intended. The playback order is determined by the order in which files were recorded (disc) or the file name (USB).
Elapsed playing time is not correct. This depends on the recording process earlier (disc/USB).
“READING” keeps flashing.         • Do not use too many hierarchical levels and folders.

•    Reload the disc or reattach the device (USB/iPod/ iPhone).

“UNSUPPORTED DEVICE”

appears.

•    Check whether the connected USB device is compatible with this unit and ensure the file systems are in supported formats. (Page 31)

•    Reattach the USB device.

“UNRESPONSIVE DEVICE”      Make sure the USB device is not malfunction and reattach appears.                                        the USB device.
“USB HUB IS NOT

SUPPORTED” appears.

This unit cannot support a USB device connected via a USB hub.
•     The source does not change to “USB” when you connect a USB device while listening to another source.

•     “USB ERROR” appears.

The USB port is drawing more power than the design limit. Turn the power off and unplug the USB device. Then, turn on the power and reattach the USB device.

If this does not solve the problem, turn the power off and on (or reset the unit) before replacing with another USB device.

Symptom Remedy
CD/USB/iPod The iPod/iPhone does not      • Check the connection between this unit and iPod/iPhone. turn on or does not work.        • Disconnect and reset the iPod/iPhone using hard reset.
“LOADING” appears when you enter search mode by pressing . This unit is still preparing the iPod/iPhone music list. It may take some time to load, try again later.
“NO DISC” Insert a playable disc into the loading slot.
“TOC ERROR” Make sure the disc is clean and inserted properly.
“NA FILE”                                     Make sure the media (disc/USB) contain supported audio files. (Page 31)
“COPY PRO” A copy-protected file is played (disc/USB).
“NO DEVICE” Connect a device (USB), and change the source to USB again.
“NO MUSIC”                                  Connect a device (USB) that contains playable audio files.
“iPod ERROR” •     Reconnect the iPod.

•     Reset the iPod.

ANDROID •     Sound cannot be heard          • Reconnect the Android device.

during playback.                    • Launch any media player application on the Android

•     Sound output only from             device and start playback.

the Android device.               • Relaunch the current media player application or use

another media player application.

•    Restart the Android device.

•    If this does not solve the problem, the connected Android device is unable to route the audio signal to unit.

(Page 32)

•    If USB connection does not work, connect the Android device via Bluetooth or through auxiliary input jack.

“NO DEVICE” or “READING”         • Reconnect the Android device.

keeps flashing.                          • If USB connection does not work, connect the Android

device via Bluetooth or through auxiliary input jack.

Symptom Remedy
ANDROID Playback is intermittent or sound skips. Turn off the power saving mode on the Android device.
“NO MUSIC”/“ANDROID ERROR” •    Make sure Android device contains playable audio files.

•    Reconnect the Android device.

•    Restart the Android device.

Pandora “ADD ERROR” New station creation is unsuccessful.
“CHECK DEVICE” Check the Pandora application on your device.
“NO SKIPS” The skip limit has been reached.
“NO STATIONS” No stations are found.
“STATION LIMIT” The number of registered stations has reached its limit. Retry after deleting unnecessary stations from your device.
“UPGRADE APP” Make sure you have installed the latest version of the Pandora application on your device.
“CONNECT ERROR” Communication is unstable.
“RATING ERROR” Registration of thumbs up/thumbs down has failed due to insufficient network connectivity.
“THUMBS N/A” Registration of thumbs up/thumbs down is not allowed.
“LICENSE ERROR” You try to access from a country which Pandora is not deliverable.
iHeartRadio Station cannot be selected. If “Explicit Content” in [Account Settings] is checked in the web version of iHeartRADIO, custom stations become unavailable.
“NOT CONNECTED” Link to the application is impossible.
Symptom Remedy
Spotify “DISCONNECTED” USB is disconnected from the head unit. Please make sure the device is connected properly through USB.
“CONNECTING” •     Connected via USB input terminal: The device is connecting to the head unit. Please wait.

•     Connected via Bluetooth: The Bluetooth is disconnected. Please check Bluetooth connection and make sure both the device and unit are paired and connected.

“CHECK APP” The Spotify application is not connected properly or user is not login. End the Spotify application and restart. Then, log in to your Spotify account.
SiriusXM® Radio “CH LOCKED LOCK The selected channel is locked. Enter the correct pass code to
CODE?” unlock. (Page 16)
“CHAN UNSUB” The selected channel is unsubscribed.

Call 1-866-635-2349 in the U.S.A. or 1-877-438-9677 in

Canada to subscribe. (Page 14)

“CH UNAVAIL” The selected channel is unavailable. For more information about the SiriusXM channel lineup, visit

<www.siriusxm.com>.

“CHECK ANTENNA” Check that the antenna and its connection are in good condition.
“CHECK TUNER” Make sure the SiriusXM Vehicle Tuner is connected to the unit.
“NO SIGNAL” Make sure the antenna is mounted outside the vehicle.
“SUBSCRIPTION UPDATED Your subscription is updated. Press the volume knob to
– PRESS ENTER TO continue.
CONTINUE.”  
Symptom Remedy
SiriusXM® Radio “CODE ERROR” Make sure you have entered the correct pass code. (Page 16)
“NO CONTENT” There is insufficient content to start TuneScan.
“SCAN CANCEL” TuneScan has been aborted.
Bluetooth® No Bluetooth device is detected. •    Search from the Bluetooth device again.

•    Reset the unit. (Page 3)

Pairing cannot be made. •    Make sure you have entered the same PIN code to both the unit and Bluetooth device.

•    Delete pairing information from both the unit and the Bluetooth device, then perform pairing again. (Page 17)

Echo or noise is heard during a phone conversation. •    Adjust the microphone unit’s position. (Page 17)

•    Check the [ECHO CANCEL] setting. (Page 19)

Phone sound quality is poor. •    Reduce the distance between the unit and the Bluetooth device.

•    Move the car to a place where you can get a better signal reception.

Voice calling method is not  • Use voice calling method in a more quiet environment. successful.                               • Reduce the distance from the microphone when you speak

the name.

•    Make sure the same voice as the registered voice tag is used.

Sound is being interrupted  • Reduce the distance between the unit and the Bluetooth or skipped during playback       audio player.

of a Bluetooth audio player.  • Turn off, then turn on the unit and try to connect again.

•    Other Bluetooth devices might be trying to connect to the unit.

Symptom Remedy
Bluetooth® The connected Bluetooth audio player cannot be controlled. •    Check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). (Refer to the instructions of your audio player.)

•    Disconnect and connect the Bluetooth player again.

“NOT SUPPORT” The connected phone does not support Voice Recognition feature or phonebook transfer.
“NO ENTRY”/“NO PAIR” There is no registered device connected/found via Bluetooth.
“ERROR” Try the operation again. If “ERROR” appears again, check if the device supports the function you have tried.
“NO INFO”/“NO DATA” Bluetooth device cannot get the contact information.
“HF ERROR XX”/ “BT ERROR” Reset the unit and try the operation again. If this does not solve the problem, consult your nearest service center.
“SWITCHING NG”                        The connected phones might not support phone switching

feature.

The Bluetooth connection between the Bluetooth device and the unit is unstable. Delete the unused registered Bluetooth device from the unit. (Page 21)

INSTALLATION/CONNECTION

Warning

  • The unit can only be used with a 12 V DC power supply, negative ground.
  • Disconnect the battery’s negative terminal before wiring and mounting.
  • Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit.
  • To prevent short circuit:
    • Insulate unconnected wires with vinyl tape.
    • Be sure to ground this unit to the car’s chassis again after installation.
    • Secure the wires with cable clamps and wrap vinyl tape around the wires that comes into contact with metal parts to protect the wires.

Caution

  •  For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.
  •  Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.
  •  Do not connect the wires of speakers to the car chassis or Ground wire (black), or connect them in parallel.
  •  Mount the unit at an angle of less than 30º.
  •  If your vehicle wiring harness does not have the ignition terminal, connect the Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key.
  •  Keep all cables away from heat dissipating metal parts.
  •  After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.
  •  If the fuse blows, first make sure the wires are not touching the car’s chassis, then replace the old fuse with one that has the same rating.

Part list for installation

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-37

Basic procedure

  1.  Remove the key from the ignition switch, then disconnect the terminal of the car battery.
  2.  Connect the wires properly. See “Wiring connection” on page 40.
  3.  Install the unit to your car. See “Installing the unit (in-dash mounting)”.
  4.  Connect the terminal of the car battery.
  5.  Press B SRC to turn on the power.
  6.  Detach the faceplate and reset the unit within 5 seconds.

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-38

Installing the unit (without mounting sleeve)

  1.  Remove the mounting sleeve and trim plate from the unit.
  2.  Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied/commercially available).

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-39

Use only the specified screws. Using wrong screws might damage the unit.

Removing the unit

  1.  Detach the faceplate.
  2.  Fit the catch pin on the extraction keys into the holes on both sides of the trim plate, then pull it out.
  3.  Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the illustration.

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-40

 Wiring connection

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-41

IMPORTANT
We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer.

Connecting external components

Kenwood-KMR-D378BT-Marine-Motorsports-CD-AM-FM-Radio-Bluetooth-fig-42

Frequently Asked Questions

  • Is it waterproof
    It’s water-resistant not waterproof water gets between the faceplate and the deck and poof no more sound.
  • Will this connect to my Kenwood Kia-rc50mr remote control on my boat?
    I would assume so…if it’s a 7-pin connector. I use a RC55MR remote.
  • Can i buy a remote for this head unit
    Yes, there are at least two different units available.
  • can you use a wired remote with this receiver?
    Yes. I use a Kenwood KCA-RC55MR on my application. I suspect only a Kenwood remote will work…but don’t know that for sure.
  • Does it have a sub output?
    Yes it does

https://manual.kenwood.com/files/B5A-2599-10.pdf

References

Leave a comment

Your email address will not be published. Required fields are marked *