BLS-315 Pro Lighting Stand Kit
User Manual
General information
This document contains important instructions for the safe operation of the product. Read and follow the safety instructions and all other instructions. Keep the document for future refer‐ ence. Make sure that it is available to all those using the product. If you sell the product to another user, be sure that they also receive this document.
Our products and documentation are subject to a process of continuous development. They are therefore subject to change. Please refer to the latest version of the documentation, which is ready for download under www.thomann.de.
1.1 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are used in this document.
| Signal word | Meaning |
| DANGER! | This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. |
| CAUTION! | This combination of symbol and signal word indicates a possible dangerous situation that can result in minor injury if it is not avoided. |
| NOTICE! | This combination of symbol and signal word indicates a possible dangerous situation that can result in material and environmental damage if it is not avoided. |
| Warning signs | Type of danger |
 |
Warning – danger zone. |
Safety instructions
Intended use
This speaker / light stand is used for stable fixing and height-adjustable installation of loudspeaker cabinets and lights. Use the product only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
This product may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this product only if they are supervised or instructed by a person who is responsible for their safety.
Safety
DANGER!
Risk of injury and choking hazard for children!
Children can suffocate on packaging material and small parts. Children can injure themselves when handling the product. Never allow children to play with the packaging material and the product. Always store packaging material out of the reach of babies and small children. Always dispose of packaging material properly when it is not in use. Never allow children to use the product without supervision. Keep small parts away from children and make sure that the product does not shed any small parts that children could play with.
CAUTION!
Risk of injury due to tipping of the stand during loaded transport!
If the stand is moved without having removed the installed devices, the stand may tip over and cause injuries and property damage. Remove the installed devices before transporting the stand.
CAUTION!
Risk of injury due to tipping of stand on an unsuitable ground!
When the stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage. Install the stand only on even and solid ground.
CAUTION!
Risk of injury due to tipping of the stand from excessive loading!
In case of excessive loading, the stand might tip over, causing injury and property damage. Never exceed the specified maximum load for the stand.
CAUTION!
Risk of injury due to tipping of the stand from excessive or one-sided loading of the truss beam.
In case of excessive or one-sided loading of the truss beam the stand might tip over, causing injury and property damage. Never exceed the specified maximum load for the truss beam. Spread the weight of the mounted devices evenly on the truss beam. NOTICE!
Possible staining due to plasticiser in rubber feet!
The plasticiser contained in the rubber feet of this product may react with the coating of the floor and cause permanent dark stains after some time. If necessary, use a suitable mat or felt slide to prevent direct contact between the device’s rubber feet and the floor.
Features
Professional speaker and light stand
- Material: Steel / magnesium compound
- Individually reinforced legs for high stability
- Height: 150 to 310 cm
- Stand space diameter 120 cm
- Pipe diameter: 28 mm
- 35 mm adapter for suitable speaker box
- 28 mm adapter with M8×15 thread for single mounting of a spotlight (item no. 293511)
- Centric load capacity up to 30 kg
- Optional accessories:
– Cross beam 100 cm (Item no. 293501)
– Cross beam 120 cm (Item no. 293504)
– Bag (item no. 293512) - Made in Europe
Operation
Unpack and check carefully there is no transportation damage before using the product. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
CAUTION!
Risk of injury due to tipping of the stand during loaded transport!
If the stand is moved without having removed the installed devices, the stand may tip over and cause injuries and property damage.
Remove the installed devices before transporting the stand.
CAUTION!
Risk of injury due to tipping of stand on an unsuitable ground!
When the stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage.
Install the stand only on even and solid ground.
CAUTION!
Risk of injury due to tipping of the stand from excessive loading!
In case of excessive loading, the stand might tip over, causing injury and property damage.
Never exceed the specified maximum load for the stand.
CAUTION!
Risk of injury due to tipping of the stand from excessive or one-sided loading of the truss beam.
In case of excessive or one-sided loading of the truss beam the stand might tip over, causing injury and property damage.
Never exceed the specified maximum load for the truss beam.
Spread the weight of the mounted devices evenly on the truss beam.
NOTICE!
Possible staining due to plasticiser in rubber feet!
The plasticiser contained in the rubber feet of this product may react with the coating of the floor and cause permanent dark stains after some time.
If necessary, use a suitable mat or felt slide to prevent direct contact between the device’s rubber feet and the floor.
Comply with regulations
When installing and operating, make sure to follow the standards and regulations that apply in your country.
Setup
- Unfold the feet of the stand until the cross braces are in a horizontal position.
- Fix this position with the safety screw on the carriage to which the three feet are attached.
- Pull out the two locking pins and loosen the two safety screws on the extension tubes.
- Pull out the upper extension tube to the required height and slide the locking pin through the corresponding grid hole.
- Fix the position of the upper extension tube with the safety screw on the upper tube clamp.
- Pull out the lower extension tube to the required height and slide the locking pin through the corresponding grid hole.
- Fix the position of the lower extension tube with the safety screw on the lower tube clamp.
- Mount a spotlight or a speaker. If necessary, screw one of the supplied adapters firmly to the upper extension tube. Observe the instructions of the respective manufacturers. The maximum total load capacity of 30 kg must not be exceeded.
Disassembly
- Remove the spotlight or speaker.
- Pull out the locking pin on the lower extension tube.
- Loosen the safety screw on the lower tube clamp and slide the lower extension tube all the way down.
- Tighten the safety screw on the lower tube clamp.
- Pull out the locking pin on the upper extension tube.
- Loosen the safety screw on the upper tube clamp and slide the lower extension tube all the way down.
- Tighten the safety screw on the upper tube clamp.
- Remove the adapter if applicable.
- Loosen the safety screw on the carriage to which the three feet are attached.
- Fold up the feet of the stand.
- Pack the individual parts of the system in their original packaging if possible, and store the package in a dry place protected against moisture.
Technical specifications
| Height, max. | 3.10 m |
| Adjustable stand height | 1.50 m … 3.10 m |
| Footprint | Æ 1.20 m |
| Stand tube diameter | Æ 28 mm |
| Mount type | Flange, Æ 35 mm Adapter, Æ 35 mm/36 mm Adapter, Æ 28 mm, M8×15 thread |
| Load, max. (with centric load) | 30 kg |
| Transport dimensions (W × H × D) | 137 mm × 1,240 mm × 131 mm |
| Weight | 5.6 kg |
| Colour | Black |
Further information
| Stand type | Stand for lights and speakers |
| Truss beam included | no |
| Crank | no |
| Material | Steel-magnesium compound |
| Truss beam 100 cm | Item no. 293501 (available as an option) |
| Truss beam 120 cm | Item no. 293504 (available as an option) |
| Bag | Item no. 293512 (available as an option) |
Protecting the environment
Disposal of the packing material
Environmentally friendly materials have been chosen for the packaging. These materials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are disposed of in the proper manner.
Do not dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the instructions and markings on the packaging. Observe the disposal note regarding documentation in France.
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
Internet: www.thomann.de
14.11.2023, ID: 511221 (V2)
Documents / Resources
 |
STAGEWORX BLS-315 Pro Lighting Stand Kit [pdf] User Manual BLS-315 Pro Lighting Stand Kit, BLS-315, Pro Lighting Stand Kit, Lighting Stand Kit, Stand Kit, Kit |
 |
STAGEWORX BLS-315 Pro Lighting Stand [pdf] User Manual BLS-315 Pro Lighting Stand, BLS-315, Pro Lighting Stand, Lighting Stand, Stand |
Buy musical instruments online from the market leader – Thomann United States 
