HORMANN V 6030 SEL High-Speed Door
PARTS AND TOOLS
INSTRUCTION INSTALLATION
Specifications
- Model: V 6030 SEL
- Product Type: High-Speed Door
- Language Options: German (DE), English (EN), French (FR), Dutch (NL), Spanish (ES), Italian (IT), Portuguese (PT)
- Stand: 11.2023
Dear Customer,
We are delighted that you have decided to choose a high-quality product from our company.
About These Instructions
- These instructions are divided into a text section and an illustrated section. The illustrated section can be found after the text section.
- These instructions are original as outlined in the EC Directive 2006 / 42 / EC. Read through all of the instructions carefully: they contain important information about the product. Pay attention to and follow the instructions provided particularly the safety instructions and warnings.
- Please keep these instructions in a safe place and make sure that they are available to all users at all times.
The manufacturer is not liable for any damage caused as a result of non-compliance with the operating instructions and the information contained therein or due to non-customary use of the industrial door.
Competent operation and proper maintenance influence the performance and availability of your industrial door to a considerable degree. Operating errors and inadequate maintenance lead to avoidable failures. Only competent operation and proper maintenance will guarantee satisfactory, long-term operational safety
Our customer service department will be happy to assist you. Please contact them if you have any questions after working through these operating instructions
Further applicable documents
Depending on the ordered accessories, the delivery includes further instructions, e.g. instructions on how to control the door. Also, read these instructions carefully and thoroughly. Pay attention to and follow the instructions provided herein, particularly the safety instructions and warnings.
Warnings used
The general warning symbol indicates a danger that can lead to injury or death. In the text, the general warning symbol will be used in connection with the caution levels described below. In the illustrated Section, an additional instruction refers back to the explanation in the text.
- DANGER
Indicates a danger that leads directly to death or serious injuries. - WARNING
Indicates a danger that can lead to death or serious injuries. - CAUTION
Indicates a danger that can lead to minor or moderate injuries. - ATTENTION
Indicates a danger that can lead to damage or destruction of the product.
Symbols Used
Abbreviations Used
- EN European Standard
- FFL Top edge of finished floor line
- LDB Clear passage width
- LDH Clear passage height
Safety Instructions
When used properly and for the intended purpose, industrial doors are reliable and safe to operate. Nevertheless, when used incorrectly or for purposes other than those intended, they can pose a risk. We therefore expressly draw your attention to the safety instructions contained in the individual chapters.
Intended use
- Industrial doors are used to close passage openings, to safely shut off rooms, make machines safe and secure, save energy costs, improve the room air conditions, and to accelerate the flow of materials.
- Intended use also includes paying attention to these instructions and observing inspection and maintenance conditions.
- Any other or further use is regarded as non-intended use. The manufacturer/supplier is not liable for any damage resulting from this. The risk is borne solely by the user.
Qualification of personnel
- Only qualified and instructed personnel may fit, operate and maintain the industrial door.
- Before commencing work the assigned personnel must read these instructions, particularly chapter 2.
- For safety reasons, specify distinct responsibilities for operation, maintenance, and repairs to ensure that there are no unclear assignments.
Standards and regulations
At the least, observe the following European standards and directives, as well as country-specific safety requirements, standards and regulations.
European Standards
- EN 12445 Doors – Safety in the use of power operated doors: Test methods
- EN 12453 Doors – Safety in the use of power-operated doors: Requirements
- EN 12604 Doors – Mechanical aspects: Requirements
- EN 12978 Doors – Safety devices for power-operated doors:
Requirements and test methods
- EN 60335-1 Safety of electrical equipment for domestic use and similar purposes – part 1: General requirements
- EN 61508 Functional safety of electrical/electronic/programmable electronic safety-related systems
VDE Regulations
- VDE 0113: Electrical installations with electronic equipment
- VDE 0700: Safety of electronic devices for domestic use and similar purposes
Accident prevention regulations
- BGV A3: Electrical installations and equipment Technical Rules for Workplaces
- ASR A1.7: Technical Rules for Workplaces
General safety instructions
- In addition, also observe the generally applicable statutory regulations and other binding regulations for accident prevention and environmental protection, country-specific regulations, and the recognized specialist technical rules for safe and competent working must be observed. Before beginning work, instruct personnel under these rules and regulations.
- Always keep these instructions ready to hand at the location where the industrial door is used.
- Without the supplier’s prior approval, do not carry out any modification, attachment, or conversion work on the industrial door which might compromise safety.
- Do not make any modifications to the software on programmable control systems.
- The location and operation of fire extinguishers must be indicated by appropriate information signs. Observe the statutory fire alarm and fire-fighting regulations.
- All work on the industrial door (such as maintenance, cleaning work, and inspections) may only be performed during an operational shutdown.
- Only qualified electricians may perform work on the main supply.
- Before undertaking any work, disconnect the system from the main supply and ensure that it cannot be inadvertently turned on. If available, deactivate the emergency opening lever.
Safety instructions for operation
- Before actuating the door, make sure that no persons or objects are located in the door’s area of travel. Do not reach into the guide or guide area while the door is in operation.
- Only actuate the industrial door if it is safe and functional. All protective devices and safety-related devices (e.g. detachable protective devices and emergency-OFF devices) must be present and functioning.
- Do not modify or put the safety devices out of operation.
Safety instructions for maintenance and troubleshooting
- Perform inspection and maintenance work as described in Chapter 6. Comply with the maintenance intervals and note the information on the replacement of parts / partial equipment.
- Maintenance and troubleshooting may only be carried out by specialist personnel.
- Only use spare parts that comply with the technical requirements specified by the manufacturer. This is always guaranteed when original spare parts are used.
- Only carry out welding, burning, and grinding work on the industrial door if this work has been expressly approved. For example, there may be a risk of fire and explosion! Prior to welding, burning and grinding, remove dust and combustible materials from the industrial door and its surroundings and ensure that there is adequate ventilation (risk of explosion)!
- Before disassembling the operator, fix the shaft on the operator’s side (e.g. with a forklift).
Fitting
DANGER
Mains voltage!
Contact with the mains voltage presents the danger of a deadly electric shock. For that reason, observe the following warnings under all circumstances:
- Only qualified electricians may perform work on the mains supply.
- Make sure that the on-site electrical installation complies with the applicable safety requirements.
- Ensure that the national regulations governing the operation of electrical equipment are complied with.
- Install the control unit for the industrial door operator within sight of the door.
- Before undertaking any electrical work, disconnect the system from the mains supply and ensure that it cannot be inadvertently turned on.
ATTENTION
External voltage
External voltage on the connecting terminals of the control will destroy the electronics.
- Do not apply any external voltage (e.g. mains voltage) to the connecting terminals of the control unit.
ATTENTION
Pull forces on electric cables
Pull forces on electric cables will destroy the electronics.
- Never pull on the connecting leads of the electrical components.
NOTE:
The included fixing material is approved for the following subsurfaces.
| Concrete screws: | Fitting subsurface cracked concrete C20 / 25, uncracked concrete
C20 / 25 and brickwork. |
| Long shaft plug: | Fitting subsurface concrete
C12 / 15, gas concrete, sand-lime solid brick and solid brick. |
| Metric screws: | Fitting subsurface steel, a suitable material thickness and strength must be observed. |
For deviating subsurfaces, suitable fixing material must be selected (not in the scope of delivery).
NOTE: Also, follow the other enclosed instructions for the installation of electrical connections and fitting additional electrical control elements.
To fit the door:
- Take precautionary measures to make the site safe.
- Check the on-site fitting conditions for the door (check measurements).
- Check the quality of the structure for its strength.
- Choose suitable fastenings.
- Unpack the door and check for damage.
- If delivered by a freight forwarder: Report any damage immediately.
- Check that the delivery is complete.
- Dispose of the packaging material.
- Fit the door as shown in the illustrated section.
Putting into Service
WARNING
Faulty door: A faulty door may injure persons or damage objects.
- Only put the door into service if it is in perfect condition.
WARNING
Door movements
Door travel may injure persons or damage objects.
- Make sure that no persons or objects are in the door’s closing area during operation.
- Never use the door to lift objects or persons.
- Never reach into the guide, guide area, chain, toothed wheel or return pulley during door operation.
Setting the End-of-travel Positions
The end-of-travel positions of the door are set on the control cabinet.
NOTE: Please follow the instructions supplied by the operator and control unit.
CLOSE end-of-travel position
ATTENTION
Exceeding the CLOSE end-of-travel position
If the door travels beyond the Close end-of-travel position, the bottom profile may be compressed. This could disrupt the diode deactivation of the light grille.
- Never exceed the CLOSE end-of-travel position.
- Set the CLOSE end-of-travel position so that the bottom profile makes full contact with the floor. If the guide is supported or the floor uneven, select the bottom edge of the side element as the end-of-travel position.
OPEN end-of-travel position
ATTENTION
Exceeding the OPEN end-of-travel position
If the door travels beyond the OPEN end-of-travel position, there is a risk of the door curtain slipping out of the side guides and sustaining damage.
- Never exceed the OPEN end-of-travel position.
- Set the OPEN end-of-travel position so that the lower edge of the bottom profile corresponds to the dimension for the door height.
Test run
- After fitting the door, test the functional safety according to the acceptance / handing-over report.
- Verify in the test log book (dated and signed) that a test run has been completed.
- Hand the entire door documentation over to the owner or operator of the door.
Operation
WARNING
Door movements
Door travel may injure persons or damage objects.
- Make sure that no persons or objects are in the door’s closing area during operation.
- Make sure that the door has opened completely before driving in or out! Never drive or walk through doorways unless the door has reached the OPEN end-of-travel position.
- Whenever driving in or out of the opening, always check that the door curtain has traveled up far enough to provide the necessary passage height. Never use the door to lift objects or persons.
- Do not reach into the guide or guide area while the door is in operation.
ATTENTION
Emergency operation devices
Too frequent use of emergency operation devices may damage them. This will also void the warranty for the door.
Only use the emergency operation devices in the case of a power failure or during repair work.
ATTENTION
Aggressive media, wind, and heat
Aggressive media, wind, and heat may damage the door.
- Protect the door from aggressive media:
- Saltpeter from stone or concrete
- Cement
- Plaster
- Acids
- Alkali
- Road salt
- Aggressive paints or sealants
- Aggressive sealants
- Do not open or close the door if it is windy (no outside door).
- Avoid temperatures greater than 50 °C near the door.
Instructed personnel
The door may only be operated by persons who have been instructed in its proper use. A person is considered to be instructed (EN 12453), if he / she has received instruction as to how to operate the door safely and has received permission from the owner to use the door system.
Normal wear
The design of the door represents state-of-the-art technology. Pressure marks and abrasive wear are design-related and cannot be avoided.
Emergency-OFF
In emergencies, de-energize the control by actuating the main switch, pulling the mains plug or, if available, actuating the red emergency-OFF button.
Inspection and Maintenance
WARNING
Unmaintained doors
There is a danger of injury and damage if the door is not regularly maintained. This will also void the warranty.
- Inspect and maintain the door regularly as described in these instructions or entrust this work to the manufacturer’s service department.
DANGER
Mains voltage!
Contact with the mains voltage presents the danger of a deadly electric shock.
- Before undertaking any electrical work, disconnect the system from the main supply and ensure that it cannot be inadvertently turned on.
WARNING
Door movements
There is a danger of injury and damage if the door is actuated during inspection or maintenance work.
- Before undertaking any work, disconnect the system from the main supply and ensure that it cannot be inadvertently turned on.
- If available, deactivate the emergency opening lever/handle.
WARNING
Falling parts
During dismantling, parts may fall and injure persons or damage property.
Cladding (option)
Fix the cladding (e.g. with a forklift) before dismantling.
Shaft
Fix the shaft (e.g. with a forklift) before dismantling the operator.
Only dismantle this door if you are qualified to do so
(i.e. are a competent person by EN 12635). In other words, you have the suitable training, specialist knowledge, and practical experience to allow you to dismantle the door correctly and safely.
Observe all the applicable regulations governing work safety when dismantling the door.
To dismantle and dispose of the door:
- Open the door fully.
- Carefully roll up the door manually (emergency manual operation).
- Tape around the door curtain several times with strong adhesive tape (e.g. packing tape) to prevent it from unrolling.
- Drive a forklift truck with a suitable pallet or supporting frame underneath the shaft, so that the shaft rests on the pallet or supporting frame.
- Release the fastenings securing the bearing and the operator.
- Lift the shaft or top part together with the operator of the support brackets.
CAUTION: The operator may slide off the barrel journal
When letting the shaft or top part down, take care to keep it level. - Dismantle the side guides or side elements and support brackets.
- Disassemble the door into parts and dispose of them properly.
Dissemination as well as duplication of this document and the use and communication of its content are prohibited unless explicitly permitted. Noncompliance will result in damage compensation obligations. All rights reserved in the event of patent, utility model or design model registration. Subject to changes.
FAQ
(Frequently Asked Questions)
- Q: Where can I find the installation instructions?
- A: The installation instructions can be found in the “Installation” section of the manual.
- Q: How often should I perform maintenance on the high-speed door?
- A: Follow the recommended maintenance intervals provided in the manual to ensure optimal performance of the high-speed door.
- Q: What should I do in case of an emergency?
- A: Familiarize yourself with the emergency stop procedure and use it in case of any emergencies.
- Q: Can I modify or expand the high-speed door?
- A: Refer to the “Expansion and Modification” section of the manual for guidance on modifying or expanding the high-speed door.
Documents / Resources
 |
HORMANN V 6030 SEL High Speed Door [pdf] Instruction Manual V 6030 SEL High Speed Door, V 6030 SEL, High Speed Door, Speed Door, Door |
