FORTIN 2017 Nissan Juke Push Button Remote Starters and Alarm Systems Installation Guide

FORTIN 2017 Nissan Juke Push Button Remote Starters and Alarm Systems

Product Information

The product is an immobilizer bypass system designed for Nissan Juke vehicles with push-to-start functionality from 2011 to 2017. It allows for remote control of various vehicle functions such as locking, unlocking, arming, disarming, disabling the RAP (Retained Accessory Power), controlling parking lights, monitoring door, trunk, and hood status, monitoring hand-brake and foot-brake status, and OEM remote monitoring. The product also includes a push-to-start control feature. The firmware version of the product is 72.[43]. It requires the use of the FLASH LINK UPDATER or FLASH LINK MOBILE tool (sold separately) to add firmware versions and options. The unit option for the product is C1, and the description is Push-to-Start. For installation, it is mandatory to have a functional hood pin switch. If the vehicle can be remote started with the hood open, the function A11 should be set to OFF. The installation of safety elements such as the hood pin is essential for security purposes. The product must be installed by a qualified technician to avoid any wrong connections that may cause permanent damage to the vehicle. Additional parts required for installation (not included) are 1X Fuse, 1X multimeter, and 1X Diode. To update the firmware and program the options, you can use either the FLASH LINK UPDATER with a Microsoft Windows computer with an internet connection or the FLASH LINK MOBILE with an Android or iOS smartphone with an internet connection (provider charges may apply).

Product Usage Instructions

1. Ensure that the vehicle is equipped with a functional hood pin switch. If not, install one before proceeding.
2. If the vehicle can be remote started with the hood open, set the function A11 to OFF.
3. Follow the mandatory installation steps provided in the user manual to install the product. Make sure to connect the product correctly to avoid any damage to the vehicle.
4. If required, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool to update the firmware version and program the desired options.
5. For remote start using the OEM remote, press the LOCK button on the OEM remote three times consecutively. Alternatively, use a smartphone with the FLASH LINK MOBILE app to start the vehicle.
6. Before working on the vehicle, make sure to turn on the safety switch located under the dashboard.
7. Refer to the product manual for remote monitoring, controlling parking lights, and other supported functions.
8. In case of any issues, refer to the diagnostic codes provided by the module’s red LED. The number of flashes indicates different diagnostic codes.
9. For additional safety instructions, cut the provided warning card and stick it on a visible place or use the package RSPB (sold separately).

STAND ALONE INSTALLATION

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.

Vehicle functions supported in this diagram (functional if equipped) | Fonctions du véhi- cule supportées dans ce diagramme (fonctionnelles si équipé)

VEHICLE VEHICULES

YEARS ANNÉES

Immobilizer bypass Contournement d’immobilisateur

Lock

Unlock

Arm

Disarm

RAP Disable

Parking Light

Tachometer

Door Status

Trunk Status

Hood Status*

Hand-Brake Status

Foot-Brake Status

OEM Remote monitoring

Push-to-Start Control

NISSAN

Juke

Push-to-Start- AT

2011-2017

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

NOTES
The vehicles OEM remote and SmartKey are still operable during remote start.

Parts required (Not included)

• 1X Fuse
• 1X multimeter
• 1X Diode

MANDATORY INSTALL
* HOOD PIN
HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

PARTS REQUIRED (NOT INCLUDED)

1x FLASH LINK UPDATER,
1x FLASH LINK MANAGER
SOFTWARE | PROGRAMME
Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet

1x FLASH LINK MOBILE
1x FLASH LINK MOBILE APP
Smartphone AndroId or iOS with Internet connection (provider charges may apply).
Téléphone Intelligent Android ou iOS avec connection Internet (frais du fournisseur Internet peuvent s’appliquer).

MANDATORY
HOOD PIN

REMOTE START SAFETY OVERRIDE SWITCH

Notice: the installation of safety elements are mandatory.
The hood pin and the valet switch are essential security elements and must be installed.

STAND ALONE CONFIGURATION

REMOTE STARTER FUNCTIONALITY

• All doors must be closed.
• Press the OEM remote’s Lock button 3x to remote-start (or remote-stop) the vehicle.
• The vehicle will START.

REMOTE STARTER WARNING CARD
CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: or use the package RSPB, Sold separately.

WARNING
REMOTE STARTER
THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.

DESCRIPTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

PROGRAMMING PROCEDURE 1/2 | PROCÉDURE

Remove the valet key from the back of the OEM remote.
Remove the battery from the OEM remote.
Keep the other OEM remotes at least 3 meters (10 feet) away from the vehicle to proceed.

1. Press and hold Insert the programming button: the 4-Pin (Data-Link) connector.
   1. The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.
2. Release the programming button when the LED is YELLOW.
   Release the programming button when the LED is YELLOW.
3. Insert the required remaining connectors.
4. Press and release the programming button three (3x) times.
   • The YELLOW LED will flash 3 times each second.
   • WAIT for the YELLOW LED to turn ON solide.
5. Place the OEM remote (no battery) close to the front of Start/StOP BUTTON Exactly as shown. Transponder is located behind the logo.
6. Press and release the foot-brake pedal.
   • The RED LED will turns ON.
   • The YELLOW LED turns OFF. Wait until the message ”press brake” disappears. (This may take up to 12 seconds).
7. Hold the OEM remote close to the front of START/STOP button
   • Press and release the foot-brake pedal.
   • The RED LED is ON.
   • The BLUE LED turns ON. If the BLUE LED flash rapidly, wait until the LED turns OFF.
8. Press the START/STOP button twice to turn ON the ignition.
   • The BLUE LED will Flash rapidly.
   • The RED LED will turns OFF.
9. Press the START/STOP button once to turn OFF the ignition.
   • Wait until the BLUE LED flash slowly.
10. Disconnect all the connectors and after the Data-Link (4-pins) connector

AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.

The module is now programmed.
REMOTE STARTER / ALARM VERIFICATION PROCEDURE

OPTIONAL RF-KIT PROGRAMMING

REMOTE STARTER FUNCTIONALITY

• All doors must be closed.
• Remote start the vehicle.
• Unlock the doors with either:
  • The OEM remote
  • The remote-starter remote
  • Or the proximity remote
• Enter the vehicle with the Intelligent Key.
• The vehicle can now be put in to gear and driven.

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

If the vehicle is not unlocked with one of these conditions the remote-starter will shut down as soon as any door is opened.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN

ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Documents / Resources

FORTIN 2017 Nissan Juke Push Button Remote Starters and Alarm Systems [pdf] Installation Guide 2017, 2017 Nissan Juke Push Button Remote Starters and Alarm Systems, Nissan Juke Push Button Remote Starters and Alarm Systems, Juke Push Button Remote Starters and Alarm Systems, Push Button Remote Starters and Alarm Systems, Remote Starters and Alarm Systems, Starters and Alarm Systems, Alarm Systems, Systems

References

• The domain name off.la is for sale
• wah damn solid
• Remote Car Starters, Car Alarms, Immobilizer Bypass and Connected Vehicle Solutions | Fortin Electronic Systems
• Remote Car Starters, Car Alarms, Immobilizer Bypass and Connected Vehicle Solutions | Fortin Electronic Systems
• User Manual