Nikon NIKKOR AF-S DX 18-200mm f Lens User Manual

Nikon NIKKOR AF-S DX 18-200mm f Lens

Product Information

The AF-S OX NIKKOR 18-200mm f/3.5-5.6G EO VR II lens is designed for use with Nikon digital-SLR cameras. The lens picture angle, when mounted on Nikon OX-format cameras, is equivalent to approximately 1.5x the focal length in 35mm format. It comes with a Vibration Reduction (VR) system, which reduces the effects of camera shake under normal shooting conditions, and ACTIVE mode, which reduces the effects of more noticeable camera shake such as that which occurs when taking pictures from a moving vehicle.

Product Usage Instructions

Before using the lens, ensure that it is mounted correctly on your Nikon digital SLR camera. Refer to your camera’s User’s Manual for mounting instructions.
The lens comes with a Vibration Reduction system that has two modes: NORMAL and ACTIVE. In NORMAL mode, the camera automatically distinguishes camera shake from panning motion to reduce the effects of camera shake with horizontal or vertical panning. In ACTIVE mode, it reduces the effects of more noticeable camera shake such as that which occurs when taking pictures from a moving vehicle.
To adjust the focal length of the lens, turn the zoom ring until the desired focal length is achieved. To frame your desired composition, adjust the focus ring. If your camera has a depth-of-field preview (stop-down) button or lever, depth-of-field can be previewed through the camera viewfinder.
When handling the lens, observe the precautions listed in the manual. Do not disassemble the lens or touch its internal parts as it could result in injury. Turn off the lens immediately in case of malfunction and take it to a Nikon-authorized service representative for inspection. Do not use the lens in the presence of flammable gas and do not look at the sun or other strong light sources through the lens or viewfinder as it could cause permanent visual impairment. Keep the lens out of reach of children.

Notes on Safety Operations

CAUTION

• Do not disassemble
• Touching the internal parts of the camera or lens could result in injury. Repairs should be performed only by qualified technicians. Should the camera or lens break open as the result of a fall or other accident, take the product to a Nikon-authorized service representative for inspection after unplugging the product and/or removing the battery.
• Turn off immediately in the event of malfunction Should you notice smoke or an unusual smell coming from the camera or lens, remove the battery immediately, taking care to avoid burns. Continued operation could result in injury.
• After removing or disconnecting the power source, take the product to a Nikon-authorized service representative for inspection.
• Do not use the camera or lens in the presence of flammable gas
• Operating electronic equipment in the presence of flammable gas could result in an explosion or fire.
• Do not look at the sun through the lens or viewfinder Viewing the sun or other strong light sources through the lens or viewfinder could cause permanent visual impairment.
• Keep out of reach of children
• Particular care should be taken to prevent infants from putting the batteries or other small parts into their mouths.

Observe the following precautions when handling the camera and lens

• Keep the camera and lens unit dry. Failure to do so could result in fire or electric shock.
• Do not handle or touch the camera or lens unit with wet hands. Failure to do so could result in electric shock.
• When shooting with back-lighting, do not point the lens at the sun or allow sunlight to pass directly down the lens as this may cause the camera to overheat and possibly cause a fire.
• When the lens will not be used for an extended period of time, attach both front and rear lens caps and store the lens away from direct sunlight. Failure to do so could result in a fire, as the lens may focus sunlight onto a flammable object.

Nomenclature

1. Lens hood
2. Lens hood attachment index
3. Lens hood setting index
4. Lens hood mounting index
5. Zoom ring
6. Focal length scale
7. Focal length index
8. Distance scale
9. Distance index line
10. Focus ring
11. Mounting index
12. Lens mount rubber gasket
13. CPU contacts
14. Focus mode switch
15. Vibration reduction ON/OFF switch
16. Vibration reduction mode switch
17. Zoom lock switch

Thank you for purchasing the AF-S DX NIKKOR 18-200mm f/3.5-5.6G ED VR II lens. DX NIKKOR lenses are specially designed for use with Nikon digital-SLR (Nikon DX-format) cameras, such as the D300-series and D90. When mounted on Nikon DX-format cameras, the lens picture angle is equivalent to approximately 1.Sx the focal length in 35mm format. Before using this lens, please read these instructions and refer to your camera’s User1s Manual.

Major features

• By enabling vibration reduction (VRII), slower shutter speeds (approximately four stops*) can be used, thus increasing the range of usable shutter speeds and zoom positions, particularly when hand-holding the camera. (*Based on results achieved under Nikon measurement conditions. The effects of vibration reduction may vary according to shooting conditions and use.)
• It is possible to switch between NORMAL mode, which reduces effects of camera shake under normal shooting conditions, and ACTIVE mode, which reduces effects of more noticeable camera shake such as that which occurs when taking pictures from a moving vehicle.
  In NORMAL mode, the camera automatically distinguishes camera shake from panning motion to reduce the effects of camera shake with horizontal or vertical panning.
• Superior optical performance and rendering characteristics are maximized with the use of three aspherical lens elements and two extra-low dispersion (ED) glass elements, which ensure correction of chromatic aberration. In addition, the rounded aperture produces soft and pleasing blur characteristics in portions of pictures that are out-of­focus.

Focusing, zooming, and d?th of field

Before focusing, rotate the zoom ring (§) to adjust the focal length until the desired composition is framed. If your camera has a depth-of-field preview (stop­ down) button or lever, depth of field can be previewed through the camera viewfinder.

• This lens is equipped with the Nikon Internal Focusing (IF) system. As the shooting distance decreases, the focal length also decreases.
• The distance scale does not indicate the precise distance between the subject and the camera. Values are approximate and should be used only as a general guide. When shooting distant landscapes, depth of field may influence operation so that the camera may focus at a position that is closer than infinity.
• When the zoom lock switch @ is set to LOCK position at the focal length of 18mm, the zoom ring is locked. When carrying the camera, lock the zoom ring to prevent the lens from extending due to its own weight.

Setting the aperture
Use the camera to adjust the aperture setting.

Variable maximum apertures
Zooming the lens from 18mm to 200mm decreases the maximum aperture by 1 1/3 stop. However, there is no need to adjust the aperture setting to achieve correct exposures because the camera automatically compensates for this variable.

Focusing (Fig. A)
Set your camera’s focus mode selector according to the chart below
For more information on camera focus modes, refer to your camera’s User’s Manual.

Autofocus with manual override (M/ A Cmode)

• Set the lens focus mode switch @ to M/ A.
• Autofocus is enabled, but autofocus operation can be overridden by rotating the separate focus ring while pressing the shutter-release button halfway, or by pressing the AF-ON button on the camera body of cameras so equipped.
• Press the’ shutter-release button halfway or the AFON button once again to cancel manual focus and resume autofocus.

Getting good results with autofocus

Refer to “Notes on using wide- or super wide-angle AF NIKKOR lenses” (P. 21).

Vibration reduction mode (VRII) Basic concept behind vibration reduction

Setting the vibration reduction ON/OFF switch (Fig. B)

• ON: The effects of camera shake are reduced while the shutter- release button is pressed halfway and also at the instant the shutter is released. Because vibration is reduced in the viewfinder, auto/manual focusing and exact framing of the subject are easier.
• OFF: The effects of camera shake are not reduced

Setting the vibration reduction mode switch (Fig. C)
Set the vibration reduction ON/OFF switch to ON and choose a vibration reduction mode with the vibration reduction mode switch.

• NORMAL: The vibration reduction mechanism primarily reduces the effects of camera shake. The effects of camera shake are also reduced with horizontal and vertical panning.
• ACTIVE: The vibration reduction mechanism reduces the effects ofcamera shake, such as that which occurs when taking pictures from a moving vehicle, whether it be normal or more intense camera shake. In this mode, camera shake is not automatically distinguished from panning motion.

Notes on using vibration reduction

• After pressing the shutter-release button halfway, wait until the image in the viewfinder stabilizes before pressing the shutter-release button the rest of the way down.
• Due to the characteristics of the vibration reduction mechanism, the image in the viewfinder may be blurred after the shutter is released. This is not a malfunction.
• When taking panning shots, be sure to set the vibration reduction mode switch to NORMAL. If the camera is panned in a wide arc, compensation for camera shake in the panning direction is not performed. For example, only the effects of vertical camera shake is reduced with horizontal panning.
• Do not turn the camera off or remove the lens frorn the camera while vibration reduction is operating.
  Failure to observe this note could result in the lens sounding and feeling as if an internal component is loose or broken when it is shaken. This is not a malfunction. Turn the camera on again to correct this.
• With cameras featuring a built-in flash, vibration reduction does not function while the built-in flash is charging.
• With autofocus cameras featuring an AF-ON button, vibration reduction does not function even when the AF-ON button is pressed.
• When the camera is mounted on a tripod, set the vibration reduction ON/OFF switch @ to OFF. However, set the switch to ON when using a tripod without securing the tripod head, or when using a monopod.

The built-in flash and vignetting

• The built-in flash cannot be used over distances of less than 0.6 m (2.0 ft.).
• To prevent vignetting, do not use the lens hood.
  Vignetting is the darkening of the corners around the image that occurs when light emitted by the flash is obstructed by the lens hood, or by the lens barrel depending upon the focal length or shooting distance.

The built-in flash on the 0100 has an angle of coverage suited to focal lengths of 20mm and greater. Vignetting occurs at a focal length of 18mm

Using the lens hood
The lens hood blocks light rays that have harmful effects on pictures. It also helps to protect the glass surface of the lens.

Attaching the hood

• To facilitate attachment or removal of the hood, hold it by the lens hood attachment index (r) rather than its outer edge.
• If the lens hood is not correctly attached, vignetting may occur.
• The lens can be stored with the lens hood attached in the reverse position

Lens care

• Be careful not to allow the CPU contacts @to become dirty or damaged.
• If the lens mount rubber gasket @ is damaged, be sure to visit the nearest Nikon-authorized service representative for repair.
• Clean lens surfaces with a blower brush. To remove dirt and smudges, use a soft, clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens cleaner. Wipe in a circular motion from the center to the outer edge, taking care not to leave traces or touch other parts of the lens.
• Never use organic solvent such as thinner or benzene to clean the lens, as this could cause damage, result in a fire, or cause health problems.
• NC filters are available to protect the front lens element. The lens hood also helps to protect the front of the lens.
• When storing the lens in its flexible lens pouch, attach both the front and rear lens caps.
• When the lens is mounted on a camera, do not pick up or hold the camera and lens by the lens hood.
• When the lens will not be used for an extendedperiod of time, store it in a cool, dry place to prevent mold and rust. Be sure to store the lens away from direct sunlight or chemicals such as camphor or naphthalene.
• Do not get water on the lens or drop it in water as this will cause it to rust and malfunction.
• Reinforced plastic is used for certain parts of the lens.

To avoid damage, never leave the lens in an excessively hot place.

Standard accessories

• 72mm snap-on Front Lens Cap LC-72
• Rear Lens Cap LF-l
• Bayonet Hood HB-35
• Flexible Lens Pouch CL-1018

Optional accessory

• 72mm screw-on filters

Specifications

Notes on using wide- or super wide-angle AF NIKKOR lenses
In the following situations, autofocus may not perform as expected when shooting with wide- or super wide-angle AF NIKKOR lenses.

• A person standing in front of a distant background
• Afield filled with flowers

When the main subject in the focus brackets is relatively small When a person ,standing in front of a distant background is positioned within the focus brackets, as shown in Fig. 0, the background may be in focus, while the subject is out of focus.
When the main subject is a finely patterned subject or scene When the subject is finely patterned or of low contrast, such as afield filled with flowers, as shown in Fig. E, focus may be difficult to acquire using autofocus.

Responses to these types of situations

1. Focus on a different subject located at the same distance from the camera, apply focus lock, recompose, and shoot.
2. Set the camera’s focus mode to manual focus and focus manually on the subject. Refer to “Getting Good Results with Autofocus” in the camera’s User’s Manual.

No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.

NIKON CORPORATION Fuji Bldg., 2-3 Marunouchi 3-chome, Chiyoda-ku,Tokyo 100-8331, Japan © 2009 Nikon Corporation

IMPORTANT NOTICE:
YOU MUST PRESENT THE ATTACHED WARRANTY fORM {PART 1} TOGETHER WITH PROOf-Of-PURCHASE AND PROOf-Of-PURCHASE DATE TO OBTAIN WARRANTY SERVICE

WARRANTY SERVICE

THIS FORM MUST BE PRESENTED FOR WARRANTY SERVICE

This is your Nikon Inc. One Year Limited Warranty (valid in the Continental United States, Alaska, Hawaii, Puerto Rico and u.s. Virgin Islands). YOU MUST PRESENT THIS FORM (PART 1) TOGETHER WITH PROOF-OF-PURCHASE AND PROOF-OF-PURCHASE DATE TO OBTAIN WARRANTY SERVICE.
This Nikon product is warranted by Nikon Inc. to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase. Durmg this period, if this product is found to be defective in materials or workmanship, Nikon Inc. or its authorized service station will at its option either repair or replace this product without charge subject to the following limitations and exclusions:
This warranty extends to the original consumer purchaser only and is not assignable or transferable.

This warranty shall not apply to the following:

1. Any product which has been subject to misuse, alteration, abuse, negligence or accident or has its serial number altered or removed.
2. Any defects or damage directly or indirectly caused by the use of unauthorized replacement parts and/or service performed by unauthorized personnel.
3. Any batteries.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE PROVIDED HOWEVER, THAT IF THE DISCLAIMER OF IMPLIED WARRANTIES IS INEFFECTIVE UNDER APPLICABLE LAW, THE DURATION OF ANY IMPLIED WARRANTIES ARISING BY OPERATION OF LAW SHALL BE LIMITED TO ONE (1) YEAR FROM THE DATE OF PURCHASE OR SUCH LONGER PERIOD AS MAY BE REQUIRED BY APPLICABLE LAW. UNDER NO CIRCUMSTANCES SHALL NIKON INC. BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, DIRECT, INDIRECT, EXEMPLARY OR PUNITIVE DAMAGES RELATING TO OR ARISING OUT OF ANY BREACH OF THIS WARRANTY OR ANY OTHER CLAIM REGARDING THIS PRODUCT, INCLUDING BUT NOT LIMITED TO CLAIMS OF NEGLIGENCE, STRICT LIABILITY OR BREACH OF CONTRACT
Some states do not allow (a) limitations on how long an implied warranty lasts or (b) the exclusion or limitation of incidental or consequential damages so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. In order to obtain performance of the warranty obligations, the original consumer purchaser must return this warranty and this Nikon product together with proof-of-purchase and proof- this Nikon product together with proof-of-purchase and proof-of-purchase date (bill of sale) either in person or addressed to the warranty department of Nikon Inc., New York headquarters at 1300 Walt Whitman Road, Melville, New York 11747-3064, Los Angeles area branch at 841 Apollo Street, Suite 100, El Segundo, California 90245-4721, Or any one of Nikon Inc’s Segundo, California 90245-4721, or any one of Nikon Inc’s authorized service stations at their respective addresses.
To locate Nikon AUTHORIZED SERVICE STATIONS, please visit www.nikonusa.com and click the Service tab, or call 800-NIKONSV (800-645-6678) toll-free. The original consumer purchaser in returning this Nikon product must prepay all postage, shipping, transportation, insurance and delivery costs to the repair facility. THIS WARRANTY FORM MAY NOT BE REPRODUCED OR COPIED AND SHALL BE VALID ONLY WITH PRODUCTS SOLD BY NIKON INC. Nikon AUTHORIZED SERVICE STATIONS For a list of local Nikon AUTHORIZED SERVICE STATIONS, please visit nikonusa.com and proceed to the Service tab, or call 800 NIKONSV (800 645 6678) toll-free. Retain this Worldwide Warranty with proof of purchase for your records Nikon ONE YEAR WORLDWIDE AF-S OX 18-20013.5-5.6G ED VR IlIMITED WARRANTY (Excluding the Continental United States, Alaska, Hawaii, Puerto Rico and U.S. Virgin Islands

Welcome to the worldwide family of Nikon owners.
Your Nikon equipment has been manufactured to the highest quality standards by NIKON CORPORATION, Tokyo, Japan. This warranty entitles the original consumer to worldwide warranty protection in accordance with the terms and conditions. It affords consumer warranty protection outside the continental United States, Alaska, Hawaii, Puerto Rico and the U.S. Virgin Islands. Such warranty coverage is supplemental to and not in lieu of the United States Nikon One Year Limited Warranty which is received by the customer with the Nikon product. This Nikon product except for batteries is warranted by NIKON CORPORATION,Tokyo, Japan to be free from defects in materials or workmanship for a period of one year from the date of purchase. During this period anyone of the worldwide repair facilities listed on the reverse side will repair without charge any parts or assembly of parts found to be defective in materials or workmanship subject to the following limitations: .

1. This warranty extends to the original consumer purchaser only and is not assignable or transferable.
2. This warranty shall not extend to any product which has been subject to misuse, abuse, negligence, accident or unauthorized repair.

All warranties implied by law including any warranty of merchantability or fitness for a particular purpose shall be of a duration of one (1) year from date of purchase. The warranties herein are expressly in lieu of all other express warranties including the payment of consequential or incidental damages for the breach of any warranty.
No warranties, whether express or implied, including the warranties of merchantability or fitness for a particular purpose are made by any distributor or dealer of the product herein warranted; nor shall such dealer or distributor be liable for the payment of any direct incidental or consequential damages. In order to obtain worldwide service, the consumer shouId return the Nikon product, either in person or addressed to the Warranty Department of any authorized service repair station listed on the reverse side together with proof-of-purchase and this warranty. The original consumer in returning this product must prepay all postage, shipping, transportation, insurance and delivery costs to the repair ADDRESS facility:

For prompt response of worldwide warranty inquiries, please direct all correspondence to:

• LAST
• NAME
• FIRST
• NAME
• ADDRESS
• CITY
• ZIP

Documents / Resources

Nikon NIKKOR AF-S DX 18-200mm f Lens [pdf] User Manual 054AF18200, 0300-series, 090, NIKKOR AF-S DX, NIKKOR AF-S DX 18-200mm f Lens, 18-200mm f Lens, Lens

References

• Nikon | Shop & Explore Cameras, Lenses, and Accessories
• Nikon | Shop & Explore Cameras, Lenses, and Accessories
• User Manual