Panasonic logoOperating Instructions
INTERCHANGEABLE LENS FOR
DIGITAL CAMERAPanasonic H ES35100 100-400mm Zoom LensesPanasonic H ES35100 100-400mm Zoom Lenses - Icon 3Model No.
H-ES35100
DVQX2423ZA
F0823KN0

H-ES35100 100-400mm Zoom Lenses

Panasonic H ES35100 100-400mm Zoom Lenses - FigThank you for purchasing Panasonic product.
Please read these instructions carefully before using this product, and save this manual for future use.
The lens can be used with a digital camera compatible with the lens mount standard for the Micro Four Thirds TM System.

  • It cannot be mounted on the Four Thirds TM mount specification camera.
  • For smoother recording, we recommend updating the firmware of the digital camera/lens to the latest version.
  • For the latest information on the firmware or to download/update the firmware, visit the following support website: https://panasonic.jp/support/global/cs/dsc/ (English only)
  • Micro Four ThirdsTM and Micro Four Thirds Logo marks are trademarks or registered trademarks of OM Digital Solutions Corporation, in Japan, the United States, the European Union and other countries.
  • Four Thirds TM and Four Thirds Logo marks are trademarks or registered trademarks of OM Digital Solutions Corporation, in Japan, the United States, the European Union and other countries.
  • LEICA is a registered trademark of Leica Microsystems IR GmbH. ELMARIT is a registered trademark of Leica Camera AG. The LEICA DG lenses are manufactured using measurement instruments and quality assurance systems that have been certified by Leica Camera AG based on the company’s quality standards.
  • Other names, company names, product names mentioned in this document are trademarks or registered trademarks of the companies concerned.
  • The appearance and specifications of products described in this document may differ from the actual products you have purchased due to later enhancements.

Information for Your Safety

Keep the unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games, radio transmitters, high-voltage lines etc.).

  • Do not use the camera near cell phones because doing so may result in noise adversely affecting the pictures and sound.
  • If the camera is adversely affected by electromagnetic equipment and stops functioning properly, turn the camera off and remove the battery and/or the connected AC adaptor. Then reinsert the battery and/or reconnect the AC adaptor and turn the camera on.
    -If you see this symbol-

Disposal of Old Equipment
Only for European Union and countries with recycling systems”
WEE-Disposal-icon.png  This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products must not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment.
For more information about collection and recycling, please contact your local authority.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

Precautions

Handling of the lens

  • When using this lens, take care not to drop, bump, or apply undue force to it. Doing so may cause malfunction or damage to this lens and the digital camera.
  • Images may be affected by dust, dirt, and soiling (water, oil, fingerprints, etc.) on the lens surface. Before and after recording, use a blower to blow off dust and dirt from the surface of the lens, then lightly wipe with a soft dry cloth to remove soiling.
  • When the lens is not in use, be sure to attach the lens cap and lens rear cap to prevent dust and other particles from accumulating on or entering the lens.
  • To protect the lens contact points 1, do not do the following. These may cause malfunction. (See illustration A)
    –Touch the lens contact points.
    –Allow the lens contact points to become dirty.
    –Place the lens with its mount surface facing down.

Dust and splash resistant

  • Splash Resistant and Dust Resistant are terms used to describe an extra level of protection this lens offers against exposure to a minimal amount of moisture, water or dust. These terms do not guarantee that damage will not occur if this lens is subjected to direct contact with water or dust infiltration.
    Take the following precautions to provide satisfactory dust and splash resistant performance. If the lens is not working properly, consult the dealer or Panasonic.
    –Attach to a digital camera that is dust and splash resistant.
    –When attaching or removing the lens, be careful so that foreign objects such as sand, dust, and water droplets do not adhere to or enter the lens mount rubber, contact points, digital camera and lens.
    –If the lens is exposed to water droplets or other liquids, wipe them off with a soft, dry cloth.
  • To improve the dust and splash resistant performance of the lens, a lens mount rubber is used in the mount.
    –The lens mount rubber will leave scuff marks on the digital camera mount, but this does not impact performance.
    –For information on changing the lens mount rubber, contact Panasonic.

Condensation (when the lens is fogged up)

  • Condensation occurs when the ambient temperature or humidity changes.
    Please be careful, as it may cause lens stains, mold and malfunction.
  • If condensation occurs, turn off the digital camera and leave it for approx. 2hours. The fog will disappear naturally when the temperature of the digitalcamera becomes close to the ambient temperature.

Supplied Accessories

Check that all the accessories are supplied before using the product.
Product numbers correct as of August 2023. These may be subject to change.

  1. Lens pouch
  2. Lens cap
  3. Lens rear cap
  4. Lens hood
    * Fitted to the lens at the time of purchase.

Names and Functions of Components

  1. Lens surface
  2. Focus ring
    Rotates the focus ring to focus when set to MF (Manual Focus).
    You can set the amount of movement for focusing using the focus ring with the menus in compatible digital cameras. Refer to the operating instructions for the digital camera for details.
  3. Zoom ring
    Zooms to telephoto or wide-angle.
  4. O.I.S. switch
    The stabilizer function is set to activate if the O.I.S. switch is set to [ON].
    • We recommend setting the O.I.S. switch to [OFF] when using a tripod.
  5. Contact points
  6. Lens mount rubber
  7. Lens fitting mark

Panasonic H ES35100 100-400mm Zoom Lenses - Icon 2 Note

  • There may be differences in focus when you use zoom after focusing. Focus again.
  • While shooting video, in some situations, AF operation and stabilizeroperation of the lens may be heard. It is recommended to record as follows:
    –Set to MF to record
    –Turn off the image stabilizer and use a tripod for recording

For information on how to attach the lens, refer to the operating instructions for your digital camera.

  • Attach the lens after turning off the digital camera.
  • Attach the lens after removing the lens rear cap. (See illustration 1)
  • After removing the lens from the digital camera, be sure to attach the lens cap and lens rear cap to prevent dust and other particles from accumulating on or entering the lens.

Attaching the lens hood (See illustration 2)

  1. Align mark A ( Panasonic H ES35100 100-400mm Zoom Lenses - Icon ) on the lens hood with the mark on the tip of the lens.
  2. Rotate the lens hood in the direction of the arrow to align mark B ( Panasonic H ES35100 100-400mm Zoom Lenses - Icon 1 ) on the lens hood with the mark on the tip of the lens.
    • Attach the lens hood by rotating it until it clicks.

Removing the lens hood (See illustration 3)
Rotate the lens hood in the direction of the arrow and then remove it.
Panasonic H ES35100 100-400mm Zoom Lenses - Icon 2 Note

  • When carrying, the lens hood can be attached in the reverse direction. (See illustration 4)
  • It is recommended to remove the lens hood during flash photography as the lens hood can block the light from the flash.
  • T o prevent dropping of the lens, you should never carry the lens by just holding the lens hood.
    Notes on filter use
  • It is possible to attach the lens cap or the lens hood with the filter already attached.
  • There may be some vignetting in recorded images if multiple filters are attached simultaneously.
  • It is not possible to attach any items other than filters such as a conversion lens or adaptor to the front of the lens and use it in combination with this lens.
    Lens damage may result if such items are attached.

Cautions for Use

  • Do not spray the lens with insecticides or volatile chemicals.
    –If such substances get onto the lens they can damage the exterior case or cause the paint to peel.
  • Do not point the lens at the sun or other strong light sources.
    –This may cause the lens to collect an excessive amount of light, resulting in fire and malfunction.
  • Do not use while directly touching the lens at low temperatures for a long period of time.
    –In cold places (environments below 0oC (32oF), such as ski slopes), prolonged direct contact with the lens may cause skin injury. Use gloves or similar when using the lens for long periods.
  • When cleaning, wipe lightly using a soft dry cloth that does not produce dust.
    –Do not use solvents such as benzine, thinners, alcohol, kitchen cleansers, etc., as this can cause problems such as deformation of the casing or peeling of the coating.
    –Do not use wipes with chemicals.
  • Do not keep products made of rubber, PVC or similar materials in contact with the lens for a long period of time.
  • Do not disassemble or alter this product.
  • When the lens is not going to be used for a prolonged period, we recommend storing with a desiccant (silica gel).
  • Check all the parts before recording when you have not used the lens for a long period of time.
  • Avoid using or storing the lens in any of the following locations as this may cause problems in operation or malfunctioning:
    –In direct sunlight or on a beach in summer
    –In locations with high temperatures and humidity levels or severe changes in temperature and humidity
    –In sandy or dusty locations
    –Where there is fire
    –Near heaters, air conditioners or humidifiers
    –Where water may make the lens wet
    –Where there is vibration
    –Inside a vehicle
  • Refer also to the operating instructions for the digital camera.

Troubleshooting

A rattling sound, etc. is heard when the digital camera is turned on or off or the lens is shaken.
There is a sound from the lens when taking pictures.

  • This is the sound of the internal lenses moving or the aperture operating. It is not a malfunction.

Specifications

The specifications are subject to change for performance enhancement.
INTERCHANGEABLE LENS FOR DIGITAL CAMERA “LEICA DG VARIO-ELMARIT 35-100mm/F2.8/POWER O.I.S.”
Mount
Micro Four Thirds Mount
Focal length
f=35mm to 100mm (35mm film camera equivalent: 70mm to 200mm)
Lens construction
18elements in 13groups (1UED lens, 2 ED lenses)
Aperture type
7diaphragm blades/circular aperture diaphragm
Maximum aperture
F2.8
Minimum aperture value
F22
Angle of view
34° (Wide) to 12° (Tele)
In focus distance
0.85m (2.8feet) to ∝ (from the focus distance reference line)
Maximum image magnification
0.1k (35mm film camera equivalent: 0.2k)
Optical Image Stabilizer
Yes
Filter diameter
58mm
Maximum diameter
∅ 67.4mm (2.7q)
Overall length
Approx. 99.9mm (3.9q) (from the tip of the lens to the base side of the lens mount)
Mass (Weight)
Approx. 360g (0.79lb)
Dust and splash resistant
Yes
Recommended operating temperature
-10 °C to 40°C (14°F to 104°F)
Permissible relative humidity
10%RH to 80%RHPanasonic H ES35100 100-400mm Zoom Lenses - Fig 1[India Only] Information on hazardous constituents as specified in sub-rule1 of rule16 in electrical and electronic equipment.
Declaration of Conformity with the requirements of the E-Waste (Management) Amendment Rules, 2023 with the sub-rule1 of rule16 limits with respect to Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls, Polybrominated diphenyl ethers.
The content of hazardous substance with the exemption of the applications listed in SCHEDULE II of
the E-Waste (Management) Amendment Rules, 2023:

  1. Lead (Pb) – not over 0.1% by weight.
  2. Cadmium (Cd) – not over 0.01% by weight.
  3. Mercury (Hg) – not over 0.1% by weight.
  4. Hexavalent chromium (Cr6+) – not over 0.1% by weight.
  5. Polybrominated biphenyls (PBBs) – not over 0.1% by weight.
  6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1% by weight.

WEE-Disposal-icon.png For the purpose of recycling to facilitate effective utilization of resources, please return this product to a nearby authorized collection center, registered dismantler of recycler, or Panasonic service center when disposing of this product.
Customer care number ( Toll free ) : 1800 103 1333 ,1800 108 1333
Please see the Panasonic website for further information on collection centers, etc. or call the customer care toll-free number https://www.panasonic.com/in/corporate/e-waste-management.html

Do’s & Don’ts
No. Do’s Don’ts
1 All electrical and electronic products are required to be handed over only to the Authorized recycler. The product should not be opened by the user himself /herself, but only by authorized service personnel.
2 The product should be handed over only to authorized recycler for disposal. The product is not meant for re-sale to any unauthorized agencies / scrap dealers / kabariwalas.
3 Keep the product in an isolated area, after it becomes non-functional / unrepairable so as to prevent its accidental breakage. The product is not meant for mixing into household waste stream.
4 Refer to Operating Instructions for handling of end of life products Do not keep any replaced spare part(s) from the product in an exposed area.
5 Always dispose of products that have reached end of life at Panasonic Life Solutions India Authorized Service Centre. Do not donate old electronic items to anybody. Do not dispose of your product in garbage bins along with municipal waste that ultimately reaches landfill.
6 Wherever possible or as instructed, separate the packaging material according to
responsible waste disposal options and sorting
rt
for recycling.
Do not give e-waste to informal and unorganized sectors like Local Scrap Dealers / Rag Pickers.

[For_Australia]
Panasonic Warranty

  1. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product, without charge for parts or labour, if in the opinion of Panasonic the product is found to have a manufacturing defect within one (1) year or (12 months) (the “warranty period”) from the date of purchase appearing on your purchase receipt.
  2. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia, it’s Authorised Distributors, or Dealers, and only where the products are used and serviced within Australia or its territories. Warranty cover only applies to the services that are carried out by a Panasonic Authorised Service Centre and only if valid proof of purchase is presented when the warranty service is requested.
  3. This warranty only applies if the product has been installed and/or used in accordance with the manufacturer’s recommendations (as noted in the operating instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation, accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, thunderstorm activity, infestation by insects or vermin, tampering or repair by unauthorised persons (including unauthorised alterations), exposure to abnormally corrosive conditions, or any foreign object or matter having entered the product.
  4. This warranty does not cover the following items unless the fault or defect existed at the time of purchase:
    (a) Consumable parts
    (b) Cosmetic parts
    (c) Worn or damaged parts
    (d) Information stored on Hard Disk Drives, Optical Discs, USB Devices, SD Cards, Tapes
    (e) DTV reception issues caused by TV Aerial / Cabling / Wall socket(s)
  5. Some products may be supplied with Ethernet connection hardware. The warranty is limited on such products and will not cover:
    (a) Internet and or DLNA connection / setup related problems
    (b) Access fees and or charges incurred for internet connection
    (c) Incompatible software or software not specifically stipulated in the product operations manual; and
    (d) Any indirect or consequential costs associated with the incorrect use or misuse of the hardware, its connection to the internet or any other device.
  6. To claim warranty service, when required, you should:
    Contact Panasonic’s Customer Care Centre on 132 600 for Service Centre information.
    Confirm the opening and acceptance times with the Authorised Service centre that you choose.
    Then send or take the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt.
    Any freight and insurance costs associated with the transport of the product to and/or from your nearest Authorised Service Centre must be arranged and paid for by you.
  7. The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, deinstallation or re-installation of a product, including costs related to the mounting, de-mounting or remounting of any screen, (and any other ancillary activities), delivery, handling, freighting, transportation or insurance of the product or any part thereof or replacement of and do not extend to, and exclude, any damage or loss occurring by reason of, during, associated with, or related to such installation, de-installation, re-installation or transit.

Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however, coverage will vary dependant on product. For advice on exact Authorised Service Centre locations for your product, please telephone our Customer Care Centre on 132600 or visit our website and use the Service Centre Locator.
In addition to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be excluded under the Australian Consumer Law. If there is a major failure with the product, you can reject the product and elect to have a refund or to have the product replaced or if you wish you may elect to keep the goods and be compensated for the drop in value of the goods. You are also entitled to have the product repaired or replaced if the product fails to be of acceptable quality and the failure does not amount to a major failure.
If there is a major failure in regard to the product which cannot be remedied then you must notify us within a reasonable period by contacting the Panasonic Customer Care Centre. If the failure in the product is not a major failure then Panasonic may choose to repair or replace the product and will do so in a reasonable period of time from receiving notice from you.
THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE) SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES
If you require assistance regarding warranty conditions or any other enquiries, please visit the Panasonic Australia website www.panasonic.com.au or contact by phone on 132 600
If phoning in, please ensure you have your operating instructions available.

Panasonic Australia Pty. Limited
ACN 001 592 187 ABN 83 001 592 187
1 Innovation Road, Macquarie Park NSW 2113
www.panasonic.com.au
PRO-031-F11 Issue: 5.0 23-01-2018
E GC
Manufactured by:
Panasonic Entertainment & Communication Co., Ltd.
1-10-12, Yagumo-higashi-machi, Moriguchi City, Osaka, Japan
Importer for UK:
Panasonic UK, a branch of Panasonic Marketing Europe GmbH
Maxis 2, Western Road, Bracknell, Berkshire, RG12 1RT
Importer for EU:
Panasonic Marketing Europe GmbH
Hagenauer Strasse 43, 65203 Wiesbaden, Germany
Authorized Representative in EU:
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
Panasonic Entertainment
& Communication Co., Ltd.
Web Site/Site Web: http://www.panasonic.com
C Panasonic Entertainment
& Communication Co., Ltd. 2023

Documents / Resources

Panasonic H-ES35100 100-400mm Zoom Lenses [pdf] Instruction Manual
H-ES35100GC, H-ES35100, H-ES35100 100-400mm Zoom Lenses, 100-400mm Zoom Lenses, Zoom Lenses, Lenses

References

Leave a comment

Your email address will not be published. Required fields are marked *