MeTra 95-7631B Nissan Titan 2017-2019 
Installation Guide

MeTra 95-7631B Nissan Titan 2017-2019 Installation Guide

Nissan Titan 2017-2019, Titan XD 2016-2019  95-7631B

KIT FEATURES

  • ISO DDIN radio provision
  • Painted matte blac

MeTra 95-7631B Nissan Titan 2017-2019 - KIT FEATURES

KIT COMPONENTS

  • A) Radio trim panel
  • B) Radio brackets
  • C) (4) #8 x 3/8” Phillips screws

MeTra 95-7631B Nissan Titan 2017-2019 - KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7552 Antenna Adapter: • 40-NI12

TOOLS REQUIRED

  • Panel removal tool
  • Phillips screwdriver
  • 12mm socket wrench
  • T-20 Torx driver

CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.

Dash Disassembly

  1. Remove the (2) Phillips screws securing the knee bolster panel below the steering column, and then unclip the panel. It is not necessary to completely remove the panel. (Figure A)
    MeTra 95-7631B Nissan Titan 2017-2019 - Figure A
    (Figure A)
  2. Unclip and remove the passenger door sill and kick panel. (Figure B)
    MeTra 95-7631B Nissan Titan 2017-2019 - Figure B
    (Figure B)
  3. Remove the (5) T-20 Torx screws securing the glove box and then remove. There are (2) screws below the glove box, and (3) screws exposed when you open the glove box. (Figures C and D)
    MeTra 95-7631B Nissan Titan 2017-2019 - Figure C,D
  4. Unclip and remove the (2) side trim panels at the front of the center console, and then remove the (1) Phillips screw exposed behind each panel. Tip: Pull out on the front sides of the console to release for later steps. (Figure E)
    MeTra 95-7631B Nissan Titan 2017-2019 - Figure E
    (Figure E)
  5. Slide both of the front seats forward and then remove the (2) 12mm bolts from the rear sides of the center console. Slide the seat back once done. (Figure F)
    MeTra 95-7631B Nissan Titan 2017-2019 - Figure F(Figure F)
  6. Unclip and remove either the front console pocket or heated seat controls, depending on options available. (Figure G)

    MeTra 95-7631B Nissan Titan 2017-2019 - Figure G
    (Figure G)

  7. Unclip and remove the trim panel where the center console and the dashboard meet, and then remove the (2) Phillips screws exposed. (Figure H)
    MeTra 95-7631B Nissan Titan 2017-2019 - Figure H
    (Figure H)
  8. Slide the center console back, and then unclip and remove the vent panels from each side of the radio/ climate control panel. (Figure I)
    MeTra 95-7631B Nissan Titan 2017-2019 - Figure I
    (Figure I)
  9. Remove the (2) Phillips screws securing the accessory panel below the climate control panel, and then unclip and remove. (Figure J)
    MeTra 95-7631B Nissan Titan 2017-2019 - Figure J
    (Figure J)
  10. Remove the (2) Phillips screws securing the climate control panel and then remove. (Figure K)
    MeTra 95-7631B Nissan Titan 2017-2019 - Figure k
    (Figure K)
  11. Remove the (4) Phillips screws securing the radio and then remove. (Figure L)
    MeTra 95-7631B Nissan Titan 2017-2019 - Figure L
    (Figure L)
  12. Slightly loosen the (8) T-20 Torx screws securing the radio brackets. Remove the (2) T-20 Torx screws securing the “white” climate control module below the radio and then remove. This module will be reused in kit assembly. (Figure M)
    MeTra 95-7631B Nissan Titan 2017-2019 - Figure M
    (Figure M)

Kit Assembly

  1. Attach the radio brackets to the radio trim panel using the (4) #8 x 3/8” Phillips screws provided. (Figure A)
    MeTra 95-7631B Nissan Titan 2017-2019 - Figure A 2
    (Figure A)
  2. Slide the “white” climate control module removed in dash disassembly into the lower portion of the bracket/panel assembly, and then secure with the factory hardware. (Figure B)

    MeTra 95-7631B Nissan Titan 2017-2019 - Figure B 2
    (Figure B)

  3. Slide the radio into the completed assembly, and then secure it to the assembly using the screws supplied with the radio. (Figure C)
    MeTra 95-7631B Nissan Titan 2017-2019 - Figure C 2
    (Figure C)
  4. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or= AXXESS. Test the radio for proper operation.
  5. Reassemble the dash in reverse order of disassembly.

MeTra 95-7631B Nissan Titan 2017-2019 - note

Qr code

IMPORTANT
If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.

 

Installer institute logo

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

ME CP logo
Metra recommends MECP certified technicians

 

 

METRA – The World’s best kits.®

metraonline.com

© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION

Documents / Resources

MeTra 95-7631B Nissan Titan 2017-2019 [pdf] Installation Guide
95-7631B, Nissan Titan 2017-2019

References

Leave a comment

Your email address will not be published. Required fields are marked *