A fitz MAGNAFLOW GROUP COMPANY
INSTALLATION INSTRUCTIONS
2009-2015 Honda Pilot 3.5L Direct Fit Exhaust Kit
BILL OF MATERIALS:
- 167909
- 168292
- 167501
- 168290
- 168291
PART NO. 106-0333
STEP 1: (Carefully read all instructions before installation) Disconnect the vehicle’s battery before removal of the OEM exhaust system. This will prevent electrical accidents and will reset the computer if it applies to the vehicle. Remove existing exhaust system from the vehicle. Only remove parts that will be replaced. Clean existing flange with a wire brush to ensure proper sealing.
STEP 2:
Attach item 2 to vehicle and exhaust with item 1 (nuts and bolts not included)
STEP 3:
Attach item 4 to existing isolators and item 2 with item 3
STEP 3:
Attach item 5 to existing isolators and item 2 with item 3
STEP 4:
Connect slip fit joint on item 2 with clamps provided
STEP 5:
Ensure new exhaust is not contacting any portion of the underbody of the vehicle or drivetrain.
STEP 6:
Tighten all clamps starting from rear of the vehicle. (DO NOT EXCEED 30FT-LB WHEN TIGHTENING CLAMP AND CHECK ALL CLAMPS AFTER 50 MILES. RETIGHTEN IF NECESSARY)
WARNING:
When working on, under, or around any vehicle exercise caution.
Please allow the vehicle’s exhaust system to cool before removal,exhaust temperatures may cause severe burns. If working withoulift, always consult vehicle manual for correct lifting specificationsAlways wear safety glasses and ensure a safe work area. Serious inor death could occur if safety measures are not followed.
BRExhaust recommends professional installation for all products
Technical Support: 1-800-631-7271
BRExhaust — 1901 Corporate Ctr, Oceanside, CA 92056
www.brexhaust.com
Documents / Resources
 |
BRExhaust 2009-2015 Honda Pilot 3.5L Direct Fit Exhaust Kit [pdf] Instructions 2009-2015 Honda Pilot 3.5L Direct Fit Exhaust Kit, 2009-2015 Honda Pilot 3.5L, Direct Fit Exhaust Kit, Fit Exhaust Kit, Exhaust Kit, Kit |
MagnaFlow Exhaust, Mufflers & Cat Converters - Quality. Power. Sound. 