FORTIN 85141 Toyota Land Cruiser 2005 Standard Key Remote Starters and Alarm Systems Instruction Manual

Product Information

• Product Name: Immobilizer Bypass
• Brand: Fortin
• Model: Contournement d’immobilisateur
• Vehicle Compatibility: Toyota Land Cruiser (2003-2005)
• Hardware Version: Unknown
• Firmware Version: Unknown

The Immobilizer Bypass by Fortin is a device used to bypass the immobilizer system in compatible Toyota Land Cruiser vehicles manufactured between 2003 and 2005. It allows for remote starting and other functions that may be restricted by the immobilizer system. Please note that this device requires additional tools such as the Flash Link Updater or Flash Link Mobile (sold separately) to add firmware versions and options. It is important to follow the mandatory installation instructions provided in the user manual. The installation of safety elements, such as the hood pin switch, is required to ensure proper functioning of the system. The hood pin switch must be installed if the vehicle can be remote started with the hood open. Incorrect installation or wiring connections can cause permanent damage to the vehicle, so it is recommended to have the module installed by a qualified technician.

Product Usage Instructions

1. Ensure that you have all the necessary tools and components for installation.
2. Refer to the vehicle-specific wiring diagram and identify the appropriate wiring connections.
3. Follow the wiring connection guide provided in the user manual.
4. Connect the necessary wires according to the diagram and guide:
   • A1 (-) Ground Out while Running Out RS14
   • RS7 Out
   • RS6a Out
   • RS6 IN/OUT
   • RS5 Out
   • Starter (+)
   • IGNITION2 (+)
   • IGNITION1 (+)
   • ACCESSORY (+)
   • RS3 Out
   • PARKING LIGHTS (-)
   • RS2 In
   • 12V BATTERY (+)
   • RS1 Ground | Masse (-)
5. Make sure to follow the specific instructions for connecting wires with or without data-link.
6. Double-check all connections to ensure they are properly secured.
7. At the ignition harness and light switch, connect the appropriate wires as indicated in the user manual.
8. Refer to the back view of the white 7-pin and 8-pin connectors for proper connection to the transponder and ignition harness respectively.
9. After completing the wiring connections, verify that all connections are secure and properly insulated to prevent any electrical issues.
10. Before finalizing the installation, it is recommended to update the firmware of the module and download the latest installation guide(s) from the Fortin website.

For any further assistance or inquiries regarding the Immobilizer Bypass, you can contact Fortin’s customer service at 1-877-336-7797 or visit their website at www.fortinbypass.com.

REGULAR INSTALLATION

• Vehicle functions supported in this diagram (functional if equipped)

WIRING CONNECTION

PROGRAMMING PROCEDURE

Notice: Updated Firmware and Installation Guides Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

CONTACT

• TECH SUPPORT
• Tél: 514-255-HELP (4357)
• 1-877-336-7797
• ADDENDUM GUIDE
• www.fortinbypass.com.