KRAUSMANN logo3320
GRASS TRIMMER

3320 Grass Trimmer

KRAUSMANN 3320 Grass TrimmerKRAUSMANN 3320 Grass Trimmer - SymbolOperation manual

Warning-icon.png WARNING: Do not use the machine without reading the instruction manual.

KRAUSMANN 3320 Grass Trimmer - Figure 1KRAUSMANN 3320 Grass Trimmer - Overview

Overview

Tool description

1 ΟΝ / ΟFF switch
2 Safe start button
3 Spool set
4 Edge guide wheel
5 Protective cover
6 Button for adjusting the angle of motor head
7 Motor head
8 Union nut of height adjustment
9 Lock button of rotating tube
10 Main handle
11 Auxiliary handle
12 Lock knob of auxiliary handle
13 Cable holder

Warning labels on the machine

KRAUSMANN 3320 Grass Trimmer - Symbol Read owner’s manual before operating this machine.
KRAUSMANN 3320 Grass Trimmer - Symbol 2 Wear head, eye and ear protection.
KRAUSMANN 3320 Grass Trimmer - Symbol 3 Always wear approved protective gloves.
KRAUSMANN 3320 Grass Trimmer - Symbol 4 Wear dust mask.
warning 2 Warning!
KRAUSMANN 3320 Grass Trimmer - Symbol 5 Keep bystanders away.
KRAUSMANN 3320 Grass Trimmer - Symbol 6 Disconnect the mains plug if the cord become damaged or entangled.
KRAUSMANN 3320 Grass Trimmer - Symbol 7 Do not expose to rain.

Warning IMPORTANT:
If warning seals peel off or become soiled and impossible to read, you should contact the dealer from which you purchased the product to order new seals and affix the new seal(s) in the required location(s).
Warning WARNING:
Never remodel the tool.
We won’t warrant the machine, if you use the remodeled tool or you don’t comply with the proper usage written in the manual.

Safety regulations

Warning WARNING:
Read carefully and understand all instructions before using the tool.
When using power tools, the following instructions must be followed to prevent hazards such as electric shock, fire and/or serious injury.

Work area safety

  • Keep work area clean and well lit. Cluttered benches and dark areas invite accidents.
  • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
  • Κeep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

  • Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
  • Αvoid body contact with earthed or grounded surfaces wuch as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
  • Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
  • When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord for outdoor use reduces the risk of electric shock.

Warning WARNING:
Disconnect the plug from the power source before making any assembly, adjustments or changing accessories. Such preventative safety measures reduce the risk of starting the tool accidentaly.

Personal safety

  • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of distraction while operating power tools may result in serious personal injury.
  • Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
  • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
  • Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
  • Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

Power tool use and care

  • Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer for the purpose for which it was designed.
  • Disconnect the plug from the power source before making any adjustments, changing accessories or storing power tools. Such preventative safety measures reduce the risk of starting the power tool accidentally.
  • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
  • Maintain power tools, check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools’ operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
  • Keep power tools clean and in good condition. Properly maintained power tools are less likely to bind and are easier to control.
  • Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.

Service

  • Have your power tool serviced by a qualified repair person using only genuine replacement parts. This will ensure that the safety of the power tool is maintained.
  • Follow instruction for lubricating and changing accessories.
  • Keep handles dry, clean and free from oil and grease.

Specific safety regulations

DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to electric power tools’ safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury.

  1. Wear ear protectors. Exposure to noise can cause hearing loss.
  2. Hold power tools by insulated gripping surfaces when performing an operation where the tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
  3. Wear a hard hat (safety helmet), safety glasses and/or face shield. Ordinary eye or sun glasses are NOT safety glasses. It is also highly recommended that you wear a dust mask and thickly padded gloves.
  4. Under normal operation, the tool is designed to produce vibration. The screws can come loose easily, causing a breakdown or accident. Check tightness of screws carefully before operation.
  5. In cold weather or when the tool has not been used for a long time, let the tool warm up for a while by operating it under no load. This will loosen up the lubrication.
  6. Access on the part of children should be prevented with appropriate measures.
  7. Make sure that the plug is in excellent condition.

Additional safety regulations for grass trimmer

  • Before use check the supply and extension cord for signs of damage or aging. If the cord becomes damaged during use, disconnect the cord from the supply immediately.
  • DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. Do not use the appliance if the cord is damaged or worm.
  • Keep extension cord away from cutting elements.
  • Only use the machine in daylight or good artificial light.
  • Before using the machine and after any impact, check for signs of wear or damage and repair as necessary.
  • Never operate the machine with damaged guards or without the guard in place.
  • Keep hands and feet always from the cutting means at all times especially when switching on the motor.
  • Never fit metal cutting elements.
  • Never use replacement parts or accessories not provided or recommended by the manufacturer.
  • Disconnect the machine from the mains before checking, cleaning or working on the machine and when it is not in use.
  • Inspect and maintain the trimmer regularly.
  • Have the trimmer repaired only by an authorized repairer.
  • Take care against injury from the blade fitted for trimming the filament line length.
    After extending new cutter line, always return the trimmer to its normal operating position before switching on.
  • Always ensure that ventilation openings are kept clear of debris.
  • When not in use, store the trimmer out of the reach of children.
  • For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable.
  • The nylon line will run on for a few seconds after the tool is switched off ! Do not touch moving hazardous parts before the machine is disconnected from the mains and the moving hazardous parts have come to a complete stop.
  • The type of extension cord to be used shall not be lighter than H05VVF or H05RNF.
  • Always disconnect the machine from the power supply.
    – Whenever the machine is left by the user
    – Before cleaning a blockage
    – Before checking, cleaning or working on the machine
    – After striking a foreign object to inspect the machine for damage
    – If the machine starts to vibrate abnormally, for immediately check
  • Do not connect a damaged cord to the supply or touch a damaged cord before it is disconnected from the supply for the reason that damaged cords can lead to contact with live parts.
  • Disconnect the supply immediately in the event of accident or breakdown.
  • Avoid using the machine in bad weather conditions especially when there is a risk of lightning.

Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction and design:

  • Damage to lungs if an effective dust mask is not worn.
  • Damage to hearing if effective hearing protection is not worn.
  • Health defects resulting from vibration emission if the power tool is being used over longer period of time or not adequately managed and properly maintained.

This machine produces an electromagnetic field during operation. This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this machine.

Warning WARNING:
When using electric garden tools basic safety precautions, should always be followed to reduce the risk of fire, electric shock and personal injury.

SAVE THESE INSTRUCTIONS

Warning WARNING:
Misuse or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.

Functional description and specifications

Intended use
This tool has been designed only for cutting grass and similar soft vegetation and for trimming grass edges. It should never be used for any other purpose.

WARNING:
If the replacement of any part is necessary, this has to be done by a professional in order to avoid a safety hazard.

Tool 3320
Power supply 230V~50Hz
Power input 550W
No-load speed 10000 min-¹
Cutting width 30 cm
Line diameter Ø 1.6mm × 6m
Weight 2.6 kg

Assembly
Assemble the protective cover and edge guide
Rotate the fixed trestle, using 2pcs ST4 × 14 screw to install edge guide wheel 4. Hold the machine shelf, fitting the protective cover 5 in the machine shelf. Align the protective cover and the machine shelf together with 4pcs ST4 × 14 screw.

Assemble the tauxiliary handle
Assemble the auxiliary handle 11 to the mount provided, then secure the auxiliary handle with the help of the screw and the adjustment lock provided.
To adjust the angle of auxiliary handle, undo the adjustment lock knob for the auxiliary handle 12 until it can be moved forwards or backwards without any great resistance. Set the required position and tighten the lock knob again.

Adjusting the angle of motor head
Press the button for adjusting the angle of motor head 6 to choose a fit position. Five different locking angles are possible.

Height adjustment
Undo the union nut 8 until the grass trimmer main handle 10 can be moved in and out freely. Now set the required working height and secure the handle in this position by tightening the union nut again.

Operation
Switching On and Off
Your tool switch is locked off to prevent accidental starting. To switch the tool on, first push the safe start button 2, then push the ON / OFF switch 1. To turn the tool off, release the ON / OFF switch (fig 1).

Using the grass trimmer as an edge trimmer

To cut the edges of lawns and flower beds, the grass trimmer can be converted as follows:

  • Press the button for adjusting the angle of motor head 6 in the direction of the arrow as shown on locking cover.
  • Turn the motor head 7 through 90º in the required direction until it latches in place.
  • Now you have converted the grass trimmer to an edge trimmer for cutting the lawn vertically.

Cutting (trimming)
Hold the trimmer in front of the body at an inclined angle and guide in a semicircular motion around the standing position. Good cutting performance up to grass height of 15cm. Cut down higher grass in stages.
Don’t bring the top of the wire spool housing into contact with the ground when the machine is running.
If poor cutting performance is occurred:

  • If the nylon line is too short when you start the equipment for the first time, please turn off and on several times, the line will be cut tothe perfect length automatically.
  • If the nylon line is too long when you use the equipment for the first time, the surplus end of it will be cut by the blade on the protective cover to the correct length.

If the tool is vibrating, clean the tool and remove grass in between the reel fixture and the cover.

Replace the spool of nylon line
Remove the spool assembly from the trimmer. To do so, hold the outer ribbed part of the assembly with one hand, while pushing down and turning the spool head with the other to unlock it. The spool carrier and spool will now disassemble easily. The nylon line inside the spool could easily be lost, so ensure that it is put in a safe place. Insert the line through the eyelet in the spool carrier and slide the spool into it. Make sure to assemble the spool and spool carrier back onto the trimmer. To do so, push the spool cover until it locks. To test if the line is advancing properly, push the button with your thumbs while pulling the wire with your fingers. The line should advance freely.

Maintenance

Correct and regular cleaning will improve the safety and extend the lifespan of the device.
For safe and proper working, always keep the tool and ventilation slots clean.
Τhe tool may be cleaned most effectively with compressed dry air. Always wear safety goggles when cleaning tools with compressed air.
Certain cleaning agents and solvents damage plastic parts. Some of these are: gasoline, carbon tetrachloride, chlorinated cleaning solvents, ammonia and household detergents that contain ammonia.
The brushes and commutator in your tool have been engineered for many hours of dependable service. To maintain peak efficiency of the motor, we recommend every two to six months the brushes be examined.
Store the tool, operating instructions and where necessary the accessories in the original packaging. In this way you will always have all the information and parts ready to hand.

Warning WARNING:
Turn the device off, disconnect it from the mains and wait until it cools down before cleaning or maintenance to avoid electric shock or burn.

Warranty

This tool has been checked by the manufacturer. From the date of purchase by the final consumer, a two year warranty for amateur use covers any faulty material and manufacturing. The receipt or invoice of purchase needs to be displayed in case of a repair that is covered by the warranty. For possible faults during the warranty period, you should address your issue to the retail shop from which the purchase was made.

Terms of warranty
The warranty is valid only when:

  • The tool has been used properly and for the purpose for which it was purchased.
  • The tool presents a problem that is due to faulty material and manufacturing.
  • Incapability of the tool to perform according to the technical specs provided.

Damages are not covered by the warranty that are due to causes such as:

  • Wear due to improper use.
  • Partial or total disassembly.The tool’s shell must be disassembled only by personnel authorised by the official distributor.
  • Damage due to overloading.
  • Usage of incorrect or incompatible accessory.
  • Bad maintenance from the operator or any other third party.
  • Wear that was induced by external factors or rogue particles (dust, debris etc.)
  • Wear due to non compliance with the instructions in this manual.

If, during the warranty period, there is a fault that can not be repaired from the authorised service department, the tool will be replaced without any extra cost.

Repair / Servicing

In case there is a need for a repair after the warranty period has expired, we will provide the best possible attention to repair the tool successfully.

Disposal

FLEX XFE 7-12 80 Random Orbital Polisher - icon 1 Do not dispose of electrical machines as unsorted municipal waste, use separate collection facilities.
Contact your local government collection systems for information regarding the collection systems available.
If electrical machines are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old machines with new ones, the retailer will be happy to take  back your old machine for disposal.

Declaration of Conformity

Authorized Representative
PAPADEAS S.A.
4-6 Iroon 1912 St., 13671, Acharne, Greece Herewith declares that:

The Lawn Trimmer with CODE: 3320 and distinctive title: DT2140 under the brand KRAUSMANN (Description: Lawn Trimmer, 550W, Voltage: 230-240V~/50Hz, no-load speed: 10000min, cutting width: 30cm, line diameter: Ø1.6mm×6m, cutting systemQ twin line automatic feed, in color box packing), is designed in conformity with provision of the Directives 2006/42/EC, 2014/30/EU and the following manufacturing standards: EN60335- 1:2012+A11+A13+A1+A14+A2, EN50636-291:2014, EN  2233:2008,AfPS GS 2019:01 PAK, EN 55014-1:2017, EN 55014-2:2015, EN61000-32:2014, EN61000-3-3:2013.

Year in which “CE” marking was affixed: Machineyear 2020
Date: November 11th, 2020KRAUSMANN 3320 Grass Trimmer - Symbol 8* Accessories and contents may change from the production factory without any warnings, in that case the company bears no responsibility.

Notes —-

KRAUSMANN logoRELIABLE PERFORMANCE®
3320
www.krausmann.grKRAUSMANN 3320 Grass Trimmer - qr code

Documents / Resources

KRAUSMANN 3320 Grass Trimmer [pdf] Instruction Manual
3320 Grass Trimmer, 3320, Grass Trimmer, Trimmer

References

Leave a comment

Your email address will not be published. Required fields are marked *