DeLonghi TRRS Series Oil Filled Radiators
Product Description
The TRRS Series is a radiator heater designed for home use. It features a thermostat, switches, a timer (only available in certain models), a cord holder, and wheels for easy mobility.
Important Warnings
- Safety warnings: Failure to observe the warning may result in life-threatening injury by electric shock. Always follow safety precautions when using the appliance.
- Children safety: This appliance can be used by children aged 8 years and above under supervision. Children under 3 years should be kept away unless continuously supervised.
- Location: Do not use the appliance near showers, bathtubs, sinks, swimming pools, etc. Ensure it is placed in a safe location away from water sources.
- Power cable: If the power cable is damaged, it must be replaced by the manufacturer, technical service centre, or a qualified person to avoid risks.
- Safety system: Do not power the appliance through an external timer to avoid accidental resetting of the safety system.
- Socket-outlet: The appliance must not be located immediately below a fixed socket outlet.
- Extension lead: Using an extension lead is not recommended as it may cause overheating during operation.
- Overheating: Never cover the appliance during operation to avoid dangerous overheating.
Product Usage Instructions
Electrical Connection
Before plugging the radiator into the mains, ensure the following:
- Check that the power cable is intact and undamaged.
- Make sure the appliance is placed in a suitable location away from water sources.
- Do not use an extension lead.
Operating the Radiator
To operate the TRRS Series radiator:
- Make sure the electrical connection is properly set up.
- Turn on the thermostat by adjusting it to the desired temperature.
- Use the switches to control the power and heat settings.
- If available, use the timer to schedule automatic operation.
- The cord holder allows you to keep the power cable organized and out of the way.
- The wheels provide easy mobility, allowing you to move the radiator to different locations in your home.
Disposal
The TRRS Series radiator must not be disposed of with household waste. Please take it to an authorized waste separation and recycling centre for proper disposal.
FAQ
- Can children use this radiator?
- The radiator can be used by children aged 8 years and above under supervision. Children under 3 years should be kept away unless continuously supervised.
- Can I use the radiator near water sources?
- No, the radiator should not be used near showers, bathtubs, sinks, swimming pools, etc. Keep it away from water sources.
- What should I do if the power cable is damaged?
- If the power cable is damaged, it must be replaced by the manufacturer, technical service centre, or a qualified person to avoid risks.
- Can I cover the radiator during the operation?
- No, covering the radiator during operation can lead to dangerous overheating. Never cover it.
- How should I dispose of the radiator?
- The radiator must not be disposed of with household waste. Take it to an authorized waste separation and recycling centre for proper disposal.
Introductions
IMPORTANT WARNINGS
Safety warnings
Danger!
Failure to observe the warning may result in life-threatening injury by electric shock.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
- Children of less than 3 years should be kept away unless continuously supervised.
- Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
- Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
- Do not use the appliance near showers, bathtubs, sinks, swimming pools, etc.
- If the power cable has been damaged, it must be replaced by the manufacturer or the technical service centre or by a qualified person to avoid all risks.
- ATTENTION: to avoid any danger caused by an accidental resetting of the safety system, this appliance must not be powered through an external timer.
Important!
Failure to observe the warning could result in injury or damage to the appliance.
- The appliance must not be located immediately below a fixed socket outlet.
- The use of an extension lead is not recommended, as overheating of the extension lead may occur during the operation of the heater.
The danger of burns!
Failure to observe the warning could result in burns or scalds.
WARNING: To avoid overheating, never under any
circumstances cover the appliances during operation, as this would lead to dangerous overheating.
Please note
This symbol indicates recommendations and important information for the user.
- Never use the heater to dry laundry.
- Never place the power cable on top of the heater while it is hot.
- We recommend that you not place the heater in a draught, because strong draughts of air may adversely affect the equipment’s operational efficiency.
- Only use the heater in an upright position.
- The heater must be positioned at least 30cm from furniture or other objects.
- The first time you use the appliance, operate it for at least 15 minutes with the thermostat at maximum to eliminate the “new” smell. A little smoke due to the protective substances applied to the heating element before transport may be given off.
- Position the appliance so that the plug and the outlet can be easily reached even after installation.
- Do not use the appliance in rooms less than 4m2 in area.
- The appliance is fitted with a safety device that will switch off it in case of accidental overheating. To reset, please contact Customer Experience, and see the enclosed guarantee.
The appliance complies with the following EC directives:
- Low Voltage Directive and subsequent amendments;
- EEC Directive on Electromagnetic Compatibility (EMC) and subsequent amendments;
Disposing of the appliance
The appliance must not be disposed of with household waste, but taken to an authorised waste separation and recycling centre.
- Thank you for choosing a De’Longhi product.
- Please take a few minutes to read these instructions.
- This will avoid all risks and damage to the appliance.
DESCRIPTION
- A Thermostat
- B Switches
- C Timer (only in certain models)
- D Cord holder
- E Wheel
USE
Electrical connection
- Before plugging the radiator into the mains, check that the voltage of your mains electricity supply corresponds to the value V indicated on the appliance and that the socket and power line are appropriately dimensioned.
- CONNECT THE RADIATOR TO EFFICIENTLY EARTHED SOCKETS ONLY.
- This appliance complies with the directive on electromagnetic compatibility.
Fitting the feet
Remove the feet and the castors from the polystyrene packing. Insert the threaded u-bolt as shown in figures 1, 2 and 3 and use wing nuts to fix the feet to the bottom of the radiator between the last two elements, then fit the castors to the spindles on the feet and push firmly until they click into position (fig. 4-5). Pull each castor to check that it is fitted correctly. In certain models, the castors are already mounted on the feet.
Models with an “Easy wheel” system
Turn the radiator upside-down on a rug or a soft surface to prevent damaging the paint finish. Fully unfold the castors by turning them outwards (Fig.6). Turn the radiator back to its upright position.
Important!
When in use, the radiator should always be kept vertical (wheels at the bottom, controls at the top). Any other position could be dangerous!
INSTRUCTIONS FOR USE
Switching on
Turn the thermostat dial clockwise to maximum (6). Turn on both switches. The lights on the switches remain on until the room temperature reaches the set temperature, then, they will switch off.
When the room reaches the required temperature, turn the dial anticlockwise slowly until you hear a click and the lights will switch off.
The appliance will come on and go off automatically to maintain the required temperature.
- button in position «MIN» = minimum power (indicator light on);
- button in position «MED» = intermediate power (indicator light on);
- both buttons in position «MIN» and «MED» = maximum power (indicator lights on)
Using the thermostat
The thermostat operates based on room temperature and not radiator temperature. Turn the thermostat dial anticlockwise towards the lower numbers to reduce the temperature; turn it clockwise towards the higher numbers to raise the temperature. To turn the appliance off completely, turn the thermostat to a minimum and
unplug from the mains.
Frost protection function
With the thermostat in position and the switches pressed, the appliance maintains the room at a temperature of about 5˚C, preventing freezing with minimum energy consumption.
HOW TO USE THE TIMER
To program heating, proceed as follows (fig.7):
- Look at the time on your clock or watch. If it is 10 p.m., turn the numbered timer disk clockwise until the number 22 (10 p.m.) on the disk coincides with the pointer
(3) on the timer. Set the periods when you want the appliance to work by pushing the teeth (1) inward. - Each tooth (1) corresponds to a period of 15 minutes.
- This will leave visible sectors which correspond to the periods of operation (2). When set, the radiator will operate automatically each day during the times programmed (important: the radiator must always be plugged into the socket).
- To change the programming, move the teeth back into the initial position and set the new periods of operation.
- To turn the appliance off completely, as well as press the switches to the 0 position, you must also unplug it from the power outlet to avoid continued operation of the timer.
IMPORTANT: DO NOT ROTATE CLOCK DIAL COUNTERCLOCKWISE.
The timer is like an electric clock, and will only work when plugged into a power supply. When unplugged, the timer stops and must be later re-set.
Timer override (only on some models)
If you wish to override the timer settings, push the timer switch to position I (fig.8) manually (timer override). To return to timed operation push the switch back to the middle position 
(fig.8).
NOTE: if the timer switch is at the 0 position (fig. 8), the heater is off and will not operate).
MAINTENANCE
- Before carrying out any operation on the radiator, unplug from the electric mains and wait for it to cool.
- The oil-filled electric radiator requires no particular maintenance.
- It is sufficient to remove the dust with a soft, dry cloth.
- Never use abrasive powders or solvents. If necessary remove concentrations of dirt using a vacuum cleaner.
TECHNICAL CHARACTERISTICS
- Power supply See rating label
- Absorbed power “
TROUBLESHOOTING
| PROBLEM | CAUSE | SOLUTION |
| The appliance doesn’t work | Be sure it is plugged in and that the electrical outlet is working.
Check for any obstruction.
The temperature may be set too low. |
Plug into the power outlet.
Remove the obstruction and let the appliance cool down. If the appliance doesn’t work please contact Customer Experience.
Set the temperature to a higher position. |
ELECTRICAL CONNECTION
- A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plug should be cut off from the mains lead, and an appropriate plug fitted, as below. WARNING: Very carefully dispose of the cutoff plug after removing the fuse: do not insert it in a 13 Amp socket elsewhere in the house as this could cause a shock hazard.
With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded-on type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta-approved fuse to BS 1362. In the event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover can be obtained from your nearest electrical dealer. The colour of the correct replacement fuse cover is that as marked on the base of the plug. - B) If your appliance is not fitted with a plug, please follow the instructions provided below:
WARNING – THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured under the following code:
- Green and yellow: Earth
- Blue: Neutral
- Brown: Live
- As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
- The green and yellow wire must be connected to the terminal in the plug marked with the letter E or the earth symbol
or coloured green or green and yellow. The blue wire must be connected to the terminal marked with the letter N or coloured black. - The brown wire must be connected to the terminal marked with the letter L or coloured red.
CONTACT
- De’Longhi Kenwood A.P.A.Ltd Consumer Care Centre
- De’Longhi Kenwood A.P.A.Ltd & FAR#$#ù
- #FAR### Customer Service Hotline: 2237-1313
- 4 H Website: www.delonghigroup.com.
- # 7 HM E-mail: info.hk@delonghigroup.com.
- Address (HK Island): 6/F, Flat C, Eton Building, 288 Des Voeux Road Central, HK
- Address (Kowloon): Room 1603, Millennium Trade Centre, 56 Kwai Cheong Road, Kwai Hing
Documents / Resources
 |
DeLonghi TRRS Series Oil Filled Radiators [pdf] Instruction Manual TRRS Series, TRRS Series Oil Filled Radiators, Oil Filled Radiators, Filled Radiators, Radiators |
Manual-Hub.com - Free PDF manuals! 