MTNTOPCN - logoINSTALLATION INTRUCTIONS
2015+ Toyota Tacoma
SKU:ARMSport297526R

Begin by unpacking all items and inspecting for missing pieces or damage.
If you have any concens, please contact the company the product was purhcased from.
Extra hardware may be included with the hardware kit.

HARDWARE INCLUDED

x4 10-1.5mm x 30mm Hex Bolts x4  12-1.75mm x 30mm Hex Bolts x2 Trailer Buckle
x8  10mm Flat Washers x8  12mm Lock Washers x1 License plate holder
x4  10mm Lock Washers x4  12mm Flat Washers x1 Bar body
x4  10mm  Nut x4  12mm  Nut

MTNTOPCN 2015 Plus Toyota Tacoma

2015 Plus Toyota Tacoma

STEP 1
Remove the rear bar of the original car, as shown belowMTNTOPCN 2015 Plus Toyota Tacoma - Figure 1

STEP 2
Remove trailer plug by squeezing the two metal clips on each side and push from the backside of the bumper towards the face of the rear bumper. MTNTOPCN 2015 Plus Toyota Tacoma - Figure 2

STEP 3
Unplug the harness and sensor plugs located on the bottom side of the bed near the tailgate.

MTNTOPCN 2015 Plus Toyota Tacoma - Figure 3

STEP 4
Unplug each license plate light. Turn the plug counterclockwise and pull away from the reflector. MTNTOPCN 2015 Plus Toyota Tacoma - Figure 4

STEP 5
Press mount on newly bought rear bar.MTNTOPCN 2015 Plus Toyota Tacoma - Figure 5

STEP 6
Install the bar body as shown belowMTNTOPCN 2015 Plus Toyota Tacoma - Figure 6

STEP 7
The license plate frame is shown below

MTNTOPCN 2015 Plus Toyota Tacoma - Figure 7

Documents / Resources

MTNTOPCN 2015 Plus Toyota Tacoma [pdf] Installation Guide
2015 Plus, 2015 Plus Toyota Tacoma, Toyota Tacoma, Tacoma

References

Leave a comment

Your email address will not be published. Required fields are marked *