INSTALLATION INTRUCTIONS
2015+ Toyota Tacoma
SKU:ARMSport297526R
Begin by unpacking all items and inspecting for missing pieces or damage.
If you have any concens, please contact the company the product was purhcased from.
Extra hardware may be included with the hardware kit.
HARDWARE INCLUDED
x4 | 10-1.5mm x 30mm Hex Bolts | x4 | 12-1.75mm x 30mm Hex Bolts | x2 | Trailer Buckle |
x8 | 10mm Flat Washers | x8 | 12mm Lock Washers | x1 | License plate holder |
x4 | 10mm Lock Washers | x4 | 12mm Flat Washers | x1 | Bar body |
x4 | 10mm Nut | x4 | 12mm Nut |
2015 Plus Toyota Tacoma
STEP 1
Remove the rear bar of the original car, as shown below
STEP 2
Remove trailer plug by squeezing the two metal clips on each side and push from the backside of the bumper towards the face of the rear bumper.
STEP 3
Unplug the harness and sensor plugs located on the bottom side of the bed near the tailgate.
STEP 4
Unplug each license plate light. Turn the plug counterclockwise and pull away from the reflector.
STEP 5
Press mount on newly bought rear bar.
STEP 6
Install the bar body as shown below
STEP 7
The license plate frame is shown below
Documents / Resources
MTNTOPCN 2015 Plus Toyota Tacoma [pdf] Installation Guide 2015 Plus, 2015 Plus Toyota Tacoma, Toyota Tacoma, Tacoma |