BLUE OX LogoPlease visit www.blueox.com for the latest version of these installation instructions.
BX1520

2020-2022 Buick Encore GX
(Includes Sport Touring, ACC, Turbo, & Top Shutters)
Installation Instructions

Please read BOTH these Installation Instructions and the General Information sheet prior to installing or operating this equipment.

BX1520 Basepate for Buick Encore GX Black

  1. Blue Ox® towing products and accessories are intended to be installed by Blue Ox® Dealers who are familiar with our products and have the equipment and knowledge necessary to do “fit work”.
    If needed, Blue Ox ® Dealers can be found at www.blueox.com or by contacting our Technical Service Department at (402) 385-3051.
  2. Many Blue Ox® baseplates are designed to use existing holes and hardware to mount the baseplate to the towed vehicle. Even though bolts are there, do not assume they are adequate for baseplate mounting. Always use the hardware supplied in the hardware kit and existing hardware as specified in the installation instructions.

BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 1

If the front of your vehicle looks different than this, please contact us at (402)385-3051.

Serial Number….
Attachment Tab Height: 17”
Attachment Tab Width: 24”

Bolt Torque Specifications
Torque in Foot-Pounds for Inch Bolts

Bolt Size  Grade 5  Grade 8
1/4” 10 14
5/16” 19 29
3/8” 33 47
7/16” 54 78
1/2” 78 119
5/8” 154 230
3/4” 257 380

Bolt Torque Specifications
Torque in Foot-Pounds for Metric Bolts

Bolt Size  Grade 8.8  Grade 10.9
6MM 6 8
8MM 16 22
10MM 31 40
12MM 54 70
14MM 89 117
16MM 161 230
18MM 222 318

Warning-icon.png WARNING
Failure to read and follow these instructions could result in separation of the towed vehicle from the tow bar, causing property damage, loss of towed vehicle, personal injury or death.

Reference your vehicle owner’s manual for manufacturer’s towing specifications.

Instruction Notes: The fascia and windshield washer fluid reservoir are removed and reinstalled for the baseplate installation. Some drilling and trimming is required.
Place all components that are removed on a flat, sturdy surface. All items will be reinstalled unless otherwise noted after the baseplate is installed.
The dimensional variations between otherwise identical vehicles can be considerable. While the baseplate was designed for easy installation, it may be necessary to tailor the baseplate slightly to compensate for vehicle manufacturer’s tolerances.
The BX8848 Tail Light Wiring Kit is recommended for this vehicle.

NOTICE

  • Handling of some cosmetic parts when installing this product may require the use of protective covers, rags, specialty tools, etc. to prevent damage.
  • When using power drills be aware of the dangers of torque and drill bit length.
  • When using a reciprocating saw be aware of objects behind the cutting surface.
  • Use a good quality paint to spray cut edges of frame to prevent rusting.
  • Be sure that ALL electrical connections are plugged in and accessories are functioning properly before reinstalling the fascia.
  • The baseplate is computer tested to your vehicle’s GVWR, exceeding this weight will void the manufacturer’s warranty.
  • Be sure to use a sufficient amount of Loctite ® Red on all bolt threads before tightening. Tighten all bolts according to the torque chart provided unless specified.
  • Dealer or installer be certain the user receives these instruction sheets.
  • If the baseplate is in an accident, it must be replaced. DO NOT use it again! An accident can cause unseen damage and using it again could result in more damage or serious injury. DO NOT use the baseplate if it is damaged or missing parts.

Tools Required

Flat Screwdriver
Torque Wrench
Drill
Loctite® RED
1/2” Drill Bit
7MM Socket
10MM Socket
10MM Wrench
13MM Socket
15MM Socket
9/16” Socket
9/16” Wrench
3/4” Socket
3/4” Wrench

BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 2Item No…………….Part No………………Description……………………….Qty.
1…………………….Existing …………………………10MM x 1.5 x 40MM Bolt ………………………….8
2………………………Existing …………………………10MM Flat Washer, ZP …………………………..8
3…………………61-4029 ………………………..1/2”-13 Whiz Nut with 10” Wire ……………………….4
4…………………61-8448 ………………………..BX1520 Baseplate ……………………………………..1
5…………………62-3469 ………………………..Attachment Tab Assembly with Hole ………………………….2
6………………..101-10572 …………………….Support Plate …………………………………….2
7…………………201-0051 ………………………1/2”-13 x 1-1/2” Hex Head Bolt, Grade 5 …………………….4
8……………..201-0050 ………………………1/4”-20 x 3/4” Hex Head Bolt, Grade 5, ZP …………………1
9…………………201-0192 ………………………#10-32 1/2” Round Slotted Head Screw ……………………..2
10………………201-0368 ………………………3/8”-16 x 1-1/4” Hex Head Bolt, Grade 5, ZP ………………4
11 ……………….201-0553 ………………………1/4”-20 x 1/2” Hex Washer Head Type F TCS, ZP ……….2
12…………………201-0979 ………………………#12-14 x 1” Self Drilling Screw, ZP …………………………….2
13………………202-0047 ………………………#10-32 Hex Nut ………………………………………..2
14…………..202-0090 ………………………3/8”-16 Hex Nylon Insert Lock Nut, ZP …………………..4
15…………..202-0102 ………………………1/4”-20 Hex Nylon Nut, ZP ……………………………1
16……………..203-0004 ………………………7/16” Flat Washer, ZP ……………………………….7
17………………203-0012 ………………………1/2” Lock Washer, ZP ……………………………….4
18……………..203-0054 ………………………#10 Lock Washer, ZP ……………………………2
19……………..299-0685 ………………………Electrical Bracket, ZP ……………………………1
20……………226-0046(not shown) ……..Class III Safety Cables …………………………2
21………………..229-0359(not shown) ……..3/8” Quicklime, ZP ……………………………..2
22………………..290-0275(not shown) ……..8” Nylon Cable Tie ……………………………..2
23…………………290-0437(not shown) ……..Black Cap Plug Receiver ……………………….2
Important:
Use only genuine factory replacement parts on your baseplate. Do NOT substitute homemade or non-typical parts. If a bolt is lost or in need of replacement, for your safety and the preservation of your baseplate, be sure to use a replacement bolt of the same grade (In most cases it will be Grade 5, please reference the parts list above). Replacement parts may be ordered through your nearest Blue Ox® Dealer or Distributor. Failing to follow and/ or altering these installation instructions in either installation or required equipment will void the manufacturer’s warranty. Towing behind a non-motorized vehicle will void the warranty.

BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 3

  1. Using a T15 Torx, remove the three (3) bolts from the top edge of the fascia. Do this on both sides of the vehicle.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 4
  2. Using a T15 Torx, remove the five (5) bolts from along the edge of the wheel well. Do this on both sides of the vehicle.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 5
  3. Pull back the wheel well trim and prop away from the vehicle using a soft cloth. Then using a 7MM socket remove the one (1) bolt from the fascia joint (inset). Do this on both sides of the vehicle.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 6
  4. Using a T15 Torx, remove the four (4) bolts from the underside of the fascia in front of the tire. There are two (2) bolts on each side of the vehicle.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 7
  5. Using a 7MM socket, remove the seven (7) bolts (white) from the underside of the fascia. Then remove the two (2) push pins (gray). Unplug electrical connections and remove fascia. Set fascia aside to be reinstalled later.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 8
  6. Gently pull back lower cover. Using a 13MM socket, remove the two (2) bolts from the underside of the facia. Do this on both sides of the vehicle.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 9
  7. Remove the push pin (white) from the top of the windshield washer fluid reservoir on the passenger side of the vehicle. Then using a 10MM socket, remove the two (2) nuts (gray) and one (1) bolt (black) from the reservoir. Plug all lines, remove reservoir, and set aside to be reinstalled later.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 10
  8. Remove the shroud below the bumper by cutting the indicated area (left). Then press clip on bottom of shroud to slide forward and off of the vehicle (right). Do this on both sides of the vehicle.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 11
  9. Using a 15MM socket, remove the four (4) bolts from the front of the bumper. Do this on both sides of the vehicle. Let bumper hang.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 12
  10. Using a 1/2” drill bit, drill out the top hole on the passenger side of the vehicle.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 13
  11. Using a 7MM socket, remove the front two (2) bolts on each side of the belly pan. Let belly pan hang.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 14
  12. Unplug electrical on the passenger side of the vehicle and let hang.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 15
  13. Slide the baseplate between the bumper and the frame. Start one (1) existing bolt on each side of the vehicle to hold baseplate in place.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 16
  14. Install the remaining three (3) existing 10MM bolts on each side of the vehicle. Then remove starter bolt from each side and apply Locitie® Red and reinstall.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 17
  15. Attach support plate to baseplate using two (2) 3/8” x 1-1/4” bolts with hardware. Do this on both sides of the vehicle.
    ** Use Loctite® Red on all bolt threads and tighten all bolts to the appropriate torque. **BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 18
  16. Attach the support plate to the frame by installing two (2) 1/2” x 1-1/2” bolts with wire nuts. Do this on both sides of the vehicle. On the passenger side only, insert washer between the frame and baseplate on the bottom 1/2” bolt.
    ** Use Loctite® Red on all bolt threads and tighten all bolts to the appropriate torque. **BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 19
  17. Reconnect electrical on passenger side of the vehicle through the hole in the support plate.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 20
  18. Attach the permanent baseplate safety cables to the provided convenience link on the baseplate. The photo above shows the recommended installation of the cables to frame of vehicle. Additional options may interfere with suggested mounting; in this case, secure the cables to a solid piece of the frame as described in the General Information sheet. Be sure the safety cables do not rub against any hoses or moving parts. Do this on BOTH sides of the vehicle.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 21
  19. Reinstall windshield washer fluid reservoir on passenger side of the vehicle.BLUE OX BX1520 Basepate for Buick Encore GX Black - Figure 22
  20. Hold the fascia as close to its original position, mark and trim the fascia around the convenience links and attachment tabs. Reinstall the belly pan and fascia.

CUSTOMER SERVICE COMMITMENT

Blue Ox® is committed to providing you with exceptional customer care throughout your lifetime with our products. Our team is here to assist you with any questions you may have regarding the performance of your product. Simply call (402) 385-3051 and you can speak with our technical service team.
Additionally, please visit our website to see which rallies our Destination America team will be attending. For a nominal fee, our service technician will service your towing system to ensure it’s in proper working condition. Also, as a commitment to our customers, should you visit our factory, you can stay at our full service Blue Ox® campground at no charge along with enjoying a factory tour. Again, thank you for being our customer and for the confidence you have shown in the performance of our products. It is because of customers like you we enjoy the success we have today.

General Information

  1. Ensure that your product(s) are registered online at www.blueox.com. It is crucial to register your product(s) so that you may be alerted of product offerings, updates, upgrades, maintenance and safety bulletins, and/ or recalls.
  2. It is the owner’s responsibility to inspect all towing equipment for cracked welds, missing or worn parts and loose bolts before each towing trip. Be sure to use Loctite® Red on all bolts and tighten to the recommended specifications.
  3. It is the owner’s responsibility to hook up all towing equipment per manufacturer’s instructions/ recommendations.
  4. Remove the attachment tabs when not in use (if applicable).

Notice To Baseplate Installer

  1. It is YOUR responsibility to watch for:
    • Oil cooler and air conditioner lines
    • Electrical wires and hoses
    • Missing parts or attaching points on the frame
    ** If the baseplate is improperly installed and is against a wire or hose, it could cause fluid leaks or electrical shorts some time after the actual baseplate installation.

Permanent Baseplate Safety Cable Installation
Permanent baseplate safety cables are strongly recommended when towing a vehicle with a tow bar. The principle function of the permanent baseplate safety cables is to prevent the towed vehicle from breaking loose in the event the connection between the frame of the towed vehicle and the baseplate fails or becomes disconnected. The cables must be connected from the baseplate to the frame rail or cross member of the vehicle’s frame. The illustrations below show the possible arrangements recommended by Blue Ox®. Each permanent baseplate safety cable must have an adequate weight rating for the towing system. The weight rating of the two (2) cables together will not qualify.
Do not mount the permanent baseplate safety cables against wires, hoses or brake lines.
These permanent baseplate safety cables should remain installed as long as the baseplate is installed on the vehicle. Permanent baseplate safety cables are to be used in conjunction with, and NOT a replacement for legally required safety cables attaching the  towed vehicle to the towing vehicle.

BLUE OX BX1520 Basepate for Buick Encore GX Black - replacement

BLUE OX ORIGINAL PURCHASERS THREE YEAR LIMITED WARRANTY

Automatic Equipment Manufacturing Company (“Automatic”) warrants to the original (first) retail purchaser that this product, manufactured by Automatic, shall be free from defect in material and workmanship under normal use and service for a period of three years from the date of delivery.
During said three-year period, Automatic will repair or replace any parts that have been returned by the original purchaser, to the factory, transportation prepaid, and in Automatic’s sole and absolute opinion found to be defective.
Limitations on Warranty Coverage:
Coverage under this warranty will be valid only if the customer warranty card is returned by the original purchaser within 30 days of purchase.
Coverage under this warranty will be effective only when a copy of the original invoice, showing date and place of purchase, accompanies any claim for warranty. This warranty is NON TRANSFERABLE.
This limited warranty will not cover, in any way or form, any alleged damages caused by incorrect or improper installation, improper use, modification or neglect of product, failure to properly service and maintain, misuse, act of God, accident or failure of the user to follow guidelines contained in the instructional material provided by Automatic.
This warranty does not cover normal wear and tear, paint or rust.
Warrantor assumes no responsibility to the owner for loss of use of product, loss of time, inconvenience or any other damage consequential or otherwise. Including, but not limited to mileage, expense of transporting of product, return shipping expense, mechanics travel time, telephone, road service, towing, and rental during repairs, travel, lodging, loss or damage to personal property or loss of earnings.
REPAIR OR REPLACEMENT AS SET FORTH IN THIS LIMITED WARRANTY IS THE SOLE EXCLUSIVE REMEDY OF THE PURCHASER. AUTOMATIC SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN LENGTH TO THE DURATION OF THIS WARRANTY.
Please visit http://blueox.com/warranty/ to register your warranty

BLUE OX Logo© 2016 Blue Ox
One Mill Road, Industrial Park
Pender, Nebraska 68047
Phone: (402) 385-3051
Fax: (402) 385-3360
www.blueox.com
405-0725 Rev D

Documents / Resources

BLUE OX BX1520 Basepate for Buick Encore GX Black [pdf] Instruction Manual
BX1520 Basepate for Buick Encore GX Black, BX1520, Basepate for Buick Encore GX Black, Encore GX Black

References

Leave a comment

Your email address will not be published. Required fields are marked *