MotoLogic logoRear Seat Back Cushion for 2001
Buick Lesabre

MotoLogic Rear Seat Back Cushion for 2001 Buick Lesabre2001 Buick Lesabre • MotoLogic

Rear Seat Back Cushion Removal and Installation

Report a problem with this article

Removal Procedure

MotoLogic Rear Seat Back Cushion for 2001 Buick Lesabre - Removal Procedure

  1. Remove the upper trunk trim.
  2. Remove the fasteners and the cable clips from the trunk pass-through release cable, If equipped.
  3. Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation.
  4. Remove the center seat belt and outer shoulder belt buckle anchor fasteners.
  5. Lift the center shoulder belt off of the seat back and store on the rear shelf panel.
  6. Using a straight-bladed screwdriver, insert the screwdriver between the top of the seat back and rear of the shelf panel.
    MotoLogic Rear Seat Back Cushion for 2001 Buick Lesabre - shelf panel
  7. Push down on the screwdriver in order to release the rear seat back retainers.
    MotoLogic Rear Seat Back Cushion for 2001 Buick Lesabre - rear seat
  8. Release the 4 retainers and pull the seat back away from the cross car beam.
  9. Position the rear shoulder belts in order to clear the rear seat back.
  10. Pull the seat away from shelf panel far enough to pull the pass-through release cable through the opening.
  11. Remove the rear seat back.

Installation Procedure

MotoLogic Rear Seat Back Cushion for 2001 Buick Lesabre - car

  1. Install the rear seat back into the car.
  2. Feed the pass-through release cable through the opening behind seat back, If equipped.
  3. Position the rear shoulder belts over the seat back.
  4. Align the slots in the seat back with the retainer clips on the cross car beam.
  5. Push the seat back firmly in order to engage the center clips and then the outer clips.
    MotoLogic Rear Seat Back Cushion for 2001 Buick Lesabre - seat back
  6. Position the center shoulder belt over the seat back.
    Notice: Refer to Fastener Notice in Cautions and Notices.
    Important: Ensure that the fastener threads and fastener holes are free of any sealer patch material.
  7. Install the center seat belt and outer shoulder belt buckle fasteners.
    Tighten
    Tighten the fasteners to 41 Y (32 lb ft).
  8. Install the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation.
  9. Install the pass-through release cable fasteners and cable clips.
  10. Install the upper trunk trim.

MotoLogic logo2001 Buick Lesabre • MotoLogic

Documents / Resources

MotoLogic Rear Seat Back Cushion for 2001 Buick Lesabre [pdf] Instruction Manual
Rear Seat Back Cushion for 2001 Buick Lesabre, Rear Seat Back Cushion, 2001 Buick Lesabre, Seat Back Cushion, Back Cushion, Cushion

References

Leave a comment

Your email address will not be published. Required fields are marked *