cadillac 2003 CTS User Guide
cadillac 2003 CTS

OIL PAN REPLACEMENT

Removal Procedure

  1. Drain the engine oil. Refer to ENGINE OIL AND OIL FILTER REPLACEMENT .
  2. Remove the front frame. Refer to FRAME REPLACEMENT – FRONT in Frame and Underbody.
  3. Remove the bolt securing transmission fluid cooler pipes brace to the engine.
  4. Remove the 3 lower transmission mounting bolts.
    Removal Procedure
    Fig. 248: Removing Transmission Fluid Cooler Pipes Brace BoltCourtesy of GENERAL MOTORS CORP.
  5. Remove the oil pan bolts.
    Installations Instructions
    Fig. 249: Removing Oil Pan Bolts Courtesy of GENERAL MOTORS CORP.
  6. Carefully pry the oil pan away from the engine block. Remove the oil pan from the engine block.
  7. Clean the cylinder block mating surfaces.
  8. Clean and inspect the oil pan. Refer to OIL PAN CLEANING AND INSPECTION .

Installation Procedure 

  1. Apply a bead of silicone sealing compound, GM P/N 12346286 (Canadian P/N 10953472) or equivalent, to the oil pan mating surface.
  2. Position the oil pan to the engine block.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices. Important: Position the oil pan fully rearward while tightening.
  3. Install the oil pan bolts.
    Tighten
    Tighten the oil pan bolts in sequence to 15 N.m (11 1b ft).
    Installations Instructions
    Fig. 250: Installing Oil Pan Bolts Courtesy of GENERAL MOTORS CORP.
  4. Install the 3 lower transmission mounting bolts.
    Tichten
    Tighten the transmission mounting bolts to 50 N.m (37 1b ft).
    Installations Instructions
    Fig. 251: Identifying Oil Pan Bolt Tightening Sequence Courtesy of GENERAL MOTORS CORP. 
  5. Install the bolt securing transmission fluid cooler pipes brace to the engine.
    Tighten
    Tighten the transmission fluid cooler pipes brace bolt to 25
    Installations Instructions
    Fig, 252: Installing Transmission Fluid Cooler Pipes Brace Bolt Courtesy of GENERAL MOTORS CORP.
  6. Install the front frame. Refer to FRAME REPLACEMENT – FRONT in Frame and Underbody.
  7. Fill the engine oil. Refer to ENGINE OIL AND OIL FILTER REPLACEMENT .
  8. Inspect for oil leaks after engine start up.

2003 Cadillac CTS
2003 ENGINE Engine Mechanical – 2.6L &3.2L – CTS

Documents / Resources

cadillac 2003 CTS [pdf] User Guide
2003, 2004, 2003 CTS, CTS

References

Leave a comment

Your email address will not be published. Required fields are marked *