ECHOMASTER P-BUA-EXPRESS Wiring Harness for Backup Alarm 2014-2021 Chevrolet Express
Wiring Harness for Backup Alarm 2014-2021 Chevrolet Express
INSTALLATION MANUAL
Thank you for purchasing the P-BUA-EXPRESS
TOOLS REQUIRED
- 10mm Nut-setter
- Impact Drill
- Panel Removal Tool
- Pry Bar
- Fish Tape
- STEP 1:
Remove the body grommet that is located beneath the driver-side rear corner of the vehicle with a panel removal tool
- STEP 2:
Use a pry bar to push aside the composite material (A.) that is blocking the cavity (B.) behind the grommet
- STEP 3:
Locate the OEM tail lamp connector in the rear corner on the driver side of the vehicle. Unplug the OEM connector and install the P-BUA-EXPRESS harness between the OEM connectors.
- STEP 4:
Use a fish tape to route the 2 pin connector of the harness down the C-Pillar and through the grommet cavity opening
STEP 5:
Use an impact drill and 10mm nut-setter to install a compatible backup alarm on the underside of the vehicle
Note: (2) 10mm TEK screws are provided with the compatible backup alarm
STEP 6:
Plug the backup alarm connector into the mating connector on the P-BUA-EXPRESS harness and re-install the grommet
STEP 7:
Test the backup alarm
Phone – 866-766-2267
E-Mail – support@aampglobal.com
EchoMaster is a Power Brand of AAMP Global
EchoMaster.com
Documents / Resources
 |
ECHOMASTER P-BUA-EXPRESS Wiring Harness for Backup Alarm 2014-2021 Chevrolet Express [pdf] Instruction Manual P-BUA-EXPRESS Wiring Harness for Backup Alarm 2014-2021 Chevrolet Express, P-BUA-EXPRESS, Wiring Harness for Backup Alarm 2014-2021 Chevrolet Express, Backup Alarm 2014-2021 Chevrolet Express, Alarm 2014-2021 Chevrolet Express, Chevrolet Express, Express |
EchoMaster – Aftermarket Vehicle Safety Products for Consumer and Commercial Drivers 
