FORTIN 90441 2017 Chevrolet Spark Regular Key Remote Starters And Alarm Systems
Product Information
- Product Name: Chevrolet Spark Key BypassFirmware
- Model: 2016-2019
- Firmware Version: 70.[41]
- Manufacturer: GM
- Minimum Requirements: Flash Link Updater or Flash Link Mobile tool (sold separately)
- Website: www.fortinbypass.com
Product Usage Instructions
Step 1: To add the firmware version and options, you will need to use the Flash Link Updater or Flash Link Mobile tool. These tools are sold separately.
Step 2: Program the bypass option by following these steps:
- Locate the unit option labeled “C1” and set it to “A11” (OFF) to program the hood trigger function.
Hood Trigger Function:
The hood trigger is an output status feature that affects the functionality of the vehicle’s flip-key remote during remote start.
Parts Required (Not Included):
- 1x 2 Amp Fuse
- 1x 180 Ohm resistor (for manual transmission vehicles)
Mandatory Installation:
The installation of this product requires the following:
- Hood Pin Contact: The hood pin switch (included) must be installed if the vehicle can be remote started with the hood open. Set function A11 to OFF.
- Security Sticker: This module must be installed by a qualified technician. Incorrect connections can cause permanent damage to the vehicle.
Note: The provided wiring diagram shows the connections at the ignition switch, OBDII, and other relevant components.
ADDENDUM – SUGGESTED WIRING CONFIGURATION
BYPASS FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEMENT
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool,sold separately.
Program bypass option:
UNIT OPTION OPTION UNITE/DESCRIPTION
- C1: OEM Remote status (Lock/Unlock) monitoring
- IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:
- A11: Hood trigger (Output Status).
- Program bypass option (If equiped with OEM alarm):
- D2: Unlock before / Lock after (Disarm OEM alarm)
- E5/OFF/NON
- By default DEACTIVATED
The vehicles Flip-key remote will not be functional during remote start- Parts required (Not included)
- 1X 2 Amp Fuse
- 1X 180 Ohm resistor (Manual transmission)
MANDATORY INSTALL
HOOD PIN- HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF
SECURITY STICKER
Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
DESCRIPTION
AUTOMATIC TRANSMISSION WIRING CONNECTION
MANUAL TRANSMISSION WIRING CONNECTION
DCRYPTOR PROGRAMMING PROCEDURE
Parts required (not included)
FLASH LINK UPDATER
FLASH LINK MANAGER
Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet
BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.
- Press and hold the programming button: Insert the 6-Pin Main connector.
- Release the programming button when the LED is YELLOW.
- If the LED is not solid YELLOW disconnect the 6-Pin connecto (Main-Harness) and go back to step 1
- Insert the required remaining connectors.
- Press and release the programming button five times (5x).
- The YELLOW LED will alternate between 5x flashes and a pause.Wait until the YELLOW LED turns ON.
- Turn the Ignition to the ON/RUN position.
- The RED LED will turns ON.
- The YELLOW LED turns OFF.
- If the LED is not solid RED disconnect the 6-Pin connector (Main-Harness) and go back to step
- Turn the Ignition to the OFF position.
- Remove the key from the ignition barrel.
Wait 5 seconds.- Turn the Ignition to the ON position.
- The BLUE LED will turns ON.
- Wait, the BLUE & RED LED will turn OFF.
- Wait, the YELLOW LED will Flash.
- Wait, the YELLOW LED will turn OFF.
- Wait, the BLUE LED will Flash rapidly.
- If the LEDs do not react as shown, disconnect the 6-Pin connector (Main-Harness) and go back to step 1.
- Turn the Ignition to the OFF position. ~ the BLUE LED flash slowly.
- Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector.
- Use the tool: FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
- Parts required (not included)
- AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 6-Pin (Main- Harness) or the 4-pins (Data-Link) connector and after all the remaining connector.
- The module is now programmed.
REMOTE STARTER FUNCTIONALITY
- Ready mode is now active, remote start is functional. If one of the doors is open the mode will be disabled.
- Ready mode is now active, remote start is functional. If one of the doors is open the mode will be disabled.
- Ready mode is now active, remote start is functional. If one of the doors is open the mode will be disabled.
TAKE OVER AUTOMATIQUE TRANSMISSION
Notice: Updated Firmware and Installation Guides Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
INTERFACE MODULE
- Made in Canada
- PATENTS PENDING
- US: 2007-228827-A1
- www.fortinbypass.com
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
TECH SUPPORT
- Tél: 514-255-HELP (4357)
- 1-877-336-7797
- www.fortinbypass.com
- This guide may change without notice. See www.fortin.ca for latest version.
Documents / Resources
 |
FORTIN 90441 2017 Chevrolet Spark Regular Key Remote Starters And Alarm Systems [pdf] Installation Guide 90441 2017 Chevrolet Spark Regular Key Remote Starters And Alarm Systems, 90441, 2017 Chevrolet Spark Regular Key Remote Starters And Alarm Systems, Chevrolet Spark Regular Key Remote Starters And Alarm Systems, Spark Regular Key Remote Starters And Alarm Systems, Regular Key Remote Starters And Alarm Systems, Key Remote Starters And Alarm Systems, Remote Starters And Alarm Systems, Starters And Alarm Systems, And Alarm Systems, Alarm Systems |
References
-
Remote Car Starters, Car Alarms, Immobilizer Bypass and Connected Vehicle Solutions | Fortin Electronic Systems
-
Remote Car Starters, Car Alarms, Immobilizer Bypass and Connected Vehicle Solutions | Fortin Electronic Systems
- User Manual
