102881 Cadillac Escalade 2013 Standard Key Remote Starters and Alarm Systems

Product Information

Product Cadillac Escalade
Year Range 2007-2014
Firmware Version 70.[41]
Manufacturer GM

Product Usage Instructions

Program Bypass Option

To program the bypass option, follow these steps:

  1. Use the FLASH LINK UPDATER or FLASH LINK MOBILE tool (sold
    separately) to add the firmware version and options.
  2. Program the bypass option by setting UNIT OPTION to C1 and A11
    to OFF.

Remote Starter Option

To program the remote starter option for R.S., follow these
steps:

  1. Enable Press 3x Lock to remote start with the OEM remote.
  2. Mandatory installation: If the vehicle can be remote started
    with the hood open, set FUNCTION A11 to OFF and install the HOOD
    PIN CONTACT DE CAPOT.

Wiring Connection

Follow the wiring connections below:

Wire Color Function Wire Connection
Yellow Ignition In AA11
Purple Out A2
Purple/White Out A3
Green Out A4
White Out A5
Orange Out A6
Orange/Black Out A7
Dk.Blue Out AA88
Red/Blue In A9
Lt.Blue/Black In/Out A10
Black In A11
Pink Out AA1122
Yellow/Black Out A13
Brown/White In A14
Pink/Black In AA1155
Purple/Yellow In/Out A16
Green/White In/Out A17
Green/Red In/Out AA1188
White/Black Out A19
Lt.Blue In/Out A20

Note: Cut the loop for automatic transmission mode by cutting
the C5 wire for automatic transmission mode.

For more detailed wiring connection instructions, please refer
to the user manual.

Immobilizer bypass Contournement d’immobilisateur T-Harness availble (sold separatly) T-Harnais disponible (vendu séparement) Lock Unlock Arm Disarm Trunk (open) Tachometer Heated Seats Door Status Trunk Status Hood Status Hand-Brake Status Foot-Brake Status PK3, Passlock OEM Remote monitoring R.S. OEM remote Stand Alone compatible

ONE Page 1 / 7
REGULAR INSTALLATION INSTALLATION RÉGULIÈRE

REV.: 20211109

Guide # 102881

ADDENDUM – SUGGESTED WIRING CONFIGURATION ADDENDA – SCHÉMA DE BRANCHEMENT SUGGÉRÉ
Vehicle functions supported in this diagram (functional if equipped) | Fonctions du véhicule supportées dans ce diagramme (fonctionnelles si équipé)

VEHICLE VEHICULES CADILLAC
Escalade

YEARS ANNÉES

2007-2014

·

·

·············· ·

BYPASS FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEMENT

70.[41]

GM

MINIMUM

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool,
sold separately. Pour ajouter la version logicielle et les options,
utilisez l’outil FLASH LINK UPDATER ou FLASH LINK MOBILE, vendu séparément.

Program bypass option: Programmez l’option du contournement:

UNIT OPTION OPTION UNITE
C1

IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN: SI LE VÉHICULE N’EST PAS ÉQUIPÉ

A11

OFF NON

D’UN CONTACT DE CAPOT FONCTIONNEL:

DESCRIPTION
OEM Remote status (Lock/Unlock) monitoring Suivi des status (Verrouillage/Déverrouillage) de la télécommande d’origine
Hood trigger (Output Status).
Contact de capot (état de sortie).

Program remote starter option for R.S.
OEM REMOTE STAND ALONE:
Programmez l’option démarreur à distance pour TÉLÉCOMMANDE
D’ORIGINE STAND ALONE:

FUNCTION FONCTION
38

MODE DESCRIPTION
Enable Press 3x Lock to remote start with the OEM remote.
2 Activé
Appuyez x3 sur Verrouille de la télécommance d’origine pour démarrer à distance le véhicule.

MANDATORY INSTALL | INSTALLATION OBLIGATOIRE

* HOOD PIN
CONTACT DE CAPOT

HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE

A11

OFF NON

REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

STATUT DE CAPOT : LE CONTACT DE CAPOT (INCLUS), DOIT ÊTRE INSTALLÉ SI LE VÉHICULE PEUT DÉMARRER À DISTANCE, LORSQUE LE CAPOT EST OUVERT, PROGRAMMEZ LA FONCTION A11 À NON.

SECURITY STICKER
AUTOCOLLANT DE SÉCURITÉ

WARNING ATTENTION

Included Inclus

Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed. Notice: l’installation des éléments de sécurité est obligatoire. Le contact de capot et l’autocollant de sécurité sont des éléments de sécurité essentiels et doivent absolument être installés.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG
CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
CE MODULE DOIT ÊTRE INSTALLÉ PAR UN TECHNICIEN QUALIFIÉ, TOUTE
ERREUR DANS LES BRANCHEMENTS PEUT OCCASIONNER DES DOMMAGES
PERMANENTS AU VÉHICULE.

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
DESCRIPTION | DESCRIPTION

Page 2 / 7
Parking light switch. Feux de stationnement.

(-)PARKING LIGHTS

Ignition connector* Connecteur d’ignition*
(+)ACCESSORY (~)V DATA

(+)IGNITION

(+)12V BATTERY

Ignition Barrel Barillet d’ignition

Transponder connector Connecteur du transpondeur

(+)12V IMMO

(~)CAN SW

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
WIRING CONNECTION | GUIDE DE BRANCHEMENTS

Page 3 / 7

(+)Ignion

Yellow In AA11

Purple Out A2

Purple/White Out A3

Green Out A4

White Out A5

Orange Out A6

Orange/Black Out A7

Dk.Blue Out AA88

Red/Blue In A9

Lt.Blue/Black In/Out A10

Black In A11

(-)Parking Lights

Pink Out AA1122

HOOD PIN (If the vehicle is not equipped with a hood pin)
CONTACT CAPOT (Si le véhicule n’est pas équippé
de contact de capot)

Yellow/Black Out A13
Brown/White In A14
(-)HOOD Pink/Black In AA1155 Purple/Yellow In/Out A16

Green/White In/Out A17

V DATA Green/Red In/Out AA1188 White/Black Out A19

Lt.Blue In/Out A20

(+)Accessory (+)12V
(-)Ground (+)Ignion

White Out E1 Orange Out EE22
Red In EE33 Black In EE44 Pink In/Out EE55 Yellow Out E6

CUT LOOP FOR AUTOMATIC TRANSMISSION MODE. COUPEZ LA BOUCLE POUR LE MODE TRANSMISSION AUTOMATIQUE.

C5 Brown C4 Gray/Black C3 Gray C2 Orange/Brown C1 Orange/Green

CAN SW

D6 White/Red D5 White/Blue D4 White/Green D3 Yellow/Red D2 Yellow/Blue D1 Yellow/Green

(+)12V IMMO (+)12V IMMO

GROUND

*Use a more powerful 12V source if your system required more than 2 Amp. *Utilisez une source 12V plus puissante si votre système à besoin de plus de 2 Amp.

MAX. 2 AMP.*

ESCALADE

A18
V DATA
Pink/Black or Pink Rose/Noir ou Rose

*MAX 2 AMP E3
* (+)12V
BATTERY
Red/White Rouge/Blanc

E5/A1 (+)IGNITION
Pink Rose

E2
(+)ACCESSORY
Brown or Yellow Brun Ou Jaune

C5 CAN SW
Green Vert

D4

D6
(+)12V IMMO
Red/White Rouge/Blanc

A12 (-)PARKING LIGHTS
Lt.Blue Bleu Pâle

65432 1

5 4 32 1

Ignition Barrel Barillet d’ignition

Ignition connector* Connecteur d’ignition*
Back View Black connector
Vue de dos Connecteur Noir
*The connector may differ from the one shown *Le connecteur peut être différent de celui montré.

Transponder connector
Connecteur du transpondeur
Back View Black connector
Vue de dos Connecteur Noir

1 2 34 5 6 7 8 9 10 11 12 13 14 15 16
16-Pin Back View Black connector at Parking
light switch at steering column.
Connecteur Noir Vue de dos de 16-pins au feux
de stationnement à la colonne de direction.

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.

Page 4 / 7

KEY BYPASS PROGRAMMING PROCEDURE 1/2 | PROCÉDURE DE PROGRAMMATION CONTOURNEMENT DE CLÉ 1/2

D

C

B

H

J

J H B C D

J H B C D

E

A

F

G

H B C D

G F A E

G F A E

J

I
I I I
I

7
Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector.
Débranchez tous les connecteurs et ensuite le connecteur 6-pins (Connecteur principal) ou le connecteur 4-pins (Data-Link).

G F A E

J H B C D

G F
A E

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.

Page 5 / 7

KEY BYPASS PROGRAMMING PROCEDURE 2/2 | PROCÉDURE DE PROGRAMMATION CONTOURNEMENT DE CLÉ 2/2

I I
I I
I
I
I

G

F

J

A

H

B

E

C

D

J

H B C D

8
Microsoft Windows Computer with Internet connection*

C E
D

B

H

G J
F

A

Ordinateur Microsoft Windows avec connection Internet*

FLASH LINK UPDATER* FLASH LINK MANAGER*

OR

SOFTWARE | PROGRAMME

OU

B C E D

H

J

A

F

G

VEHICLE’S OBDII CONNECTOR
CONNECTEUR OBDII DU VÉHICULE
9

FLASH LINK MOBILE*

Smartphone*
(Internet provider charges may apply)
Téléphone Intelligent*
(des frais du fournisseur Internet peuvent s’appliquer)

E

G F A E

J H B C D

Use the tool: FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.

Utilisez l’outil: FLASH LINK UPDATER ou FLASH LINK MOBILE pour visiter le menu DCryptor.

*Parts required (not included) *Pièces requises (non incluses)

AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 6-Pin (MainHarness) or the 4-pins (Data-Link) connector and after all the remaining connector.

G F A

J H B C D

J H B C D

APRÈS LA PROCÉDURE DE PROGRAMMATION DCRYPTOR COMPLETÉE : retournez au véhicule et rebranchez le connecteur 6-pins (Connecteur principal) ou le 4-pins (Data-Link) et après tous les connecteurs.

G F A E

G F
A E

The module is now programmed. Le module est programmé.

REMOTE STARTER / ALARM VERIFICATION PROCEDURE | PROCÉDURE DE VÉRIFICATION DU DÉMARREUR À DISTANCE / ALARME
Test the remote starter. Remote start the vehicle. Testez le démarreur à distance. Démarrez le véhicule à distance.

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.

Page 6 / 7

REMOTE STARTER PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION DU DÉMARREUR À DISTANCE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.
RÉFÉREZ-VOUS AU GUIDE D’INSTALLATION RAPIDE INCLUS AVEC LE MODULE POUR LA PROGRAMMATION DU DÉMARREUR À DISTANCE.

REMOTE STARTER FUNCTIONALITY | FONCTIONNALITÉS DU DÉMARREUR À DISTANCE

Start

UNLOCK

TURN ON/RUN

ON

All doors must be closed. Toutes les
portes doivent être fermées.

Remote start the vehicle.
Démarrez à distance.

Unlock the doors with the remote-starter remote or the OEM remote.
Déverrouillez les portes avec la télécomande du démarreur à distance ou
la télécommande d’origine.

Insert and Turn the key to the Ignition ON/RUN
position. Insérez et tournez la clé à la position “ON/RUN”.

Press the brake pedal.
Appuyez sur la pédale de
frein.

The vehicle can now be put in to gear and driven.
Vous êtes maintenant prêt à
embrayer et prendre la route.

Page 7 / 7

ONE

HARDWARE VERSION FIRMWARE VERSION
Date: xx-xx
INTERFACE MODULE
PATENTS PENDING US: 2007-228827-A1
Made in Canada www.fortinbypass.com
Service No : 000 102 04 2536
Module label | Étiquette sur le module

Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
Notice: Mise à jour microprogramme et Guides d’installations Des mises à jour du Firmware (microprogramme) et des guides d’installation sont mis en ligne régulièrement. Vérifiez que vous avez bien la dernière version logiciel et le dernier guide d’installation avant l’installation de ce produit.

WARNING The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
MISE EN GARDE L’information de ce guide est fournie sur la base de représentation (telle quelle) sans aucune garantie de précision et d’exactitude. Il est de la seule responsabilité de l’installateur de vérifier tous les fils et circuits avant d’effectuer les connexions. Seuls une sonde logique ou un multimètre digital doivent être utilisés. FORTIN SYSTÈMES ÉLECTRONIQUES n’assume aucune responsabilité de l’exactitude de l’information fournie. L’installation (dans chaque cas) est la responsabilité de l’installateur effectuant le travail. FORTIN SYSTÈMES ÉLECTRONIQUES n’assume aucune responsabilité suite à l’installation, que celle-ci soit bonne, mauvaise ou de n’importe autre type. Ni le manufacturier, ni le distributeur ne se considèrent responsables des dommages causés ou ayant pu être causés, indirectement ou directement, par ce module, excepté le remplacement de ce module en cas de défectuosité de fabrication. Ce module doit être installé par un technicien qualifié. L’information fournie dans ce guide est une suggestion. Ce guide d’instruction peut faire l’objet de changement sans préavis. Consultez le www.fortinbypass.com pour voir la plus récente version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE

www.fortinbypass.com
WEB UPDATE | MISE À JOUR INTERNET

Documents / Resources

FORTIN 102881 Cadillac Escalade 2013 Standard Key Remote Starters and Alarm Systems [pdf] Installation Guide
102881 Cadillac Escalade 2013 Standard Key Remote Starters and Alarm Systems, 102881, Cadillac Escalade 2013 Standard Key Remote Starters and Alarm Systems, Key Remote Starters and Alarm Systems, Starters and Alarm Systems

References

Leave a comment

Your email address will not be published. Required fields are marked *