ECHOMASTER P-BUA-COLORADO Wiring Harness for Backup Alarm 2016-2021 Chevrolet Colorado
Thank you for purchasing the P-BUA-COLORADO
WHAT’S INCLUDED
- Vehicle Specific Wire Harness (P-BUA-COLORADO)
COMPATIBLE ACCESSORIES:
- 97dB Backup Alarm (BUA-97C)
- 97dB White Noise Backup Alarm (BUA-97WNC)
TOOLS REQUIRED
- 10mm Nut-setter
- Impact Drill
HOW TO USE
- STEP 1: Locate the OEM tail lamp connector that is below the truck’s driver-side tail lamp.
- The connector is accessible from the underside of the truck.
- STEP 2: Unplug the OEM connector.
- STEP 3: Install the P-BUA-COLORADO harness between the two OEM connectors.
- STEP 4: Use an impact drill and 10mm nut-setter to install a compatible backup alarm on the metal surface near the tail lamp connector.
Note: (2) 10mm TEK screws are provided with the compatible backup alarm. - STEP 5: Plug the backup alarm connector into the mating connector on the P-BUACOLORADO harness.
- STEP 6: Enter the Vehicle Settings menu through the driver’s information center.
- Change the remote entry exterior lighting to “off”.
- This will prevent the backup alarm from sounding when the vehicle is unlocked with the OEM keyless entry transmitter.
- STEP 7: Test the backup alarm.
Phone – 866-766-2267
E-Mail – support@aampglobal.com
EchoMaster is a Power Brand of AAMP Global
EchoMaster.com
Documents / Resources
 |
ECHOMASTER P-BUA-COLORADO Wiring Harness for Backup Alarm 2016-2021 Chevrolet Colorado [pdf] Instruction Manual P-BUA-COLORADO Wiring Harness for Backup Alarm 2016-2021 Chevrolet Colorado, P-BUA-COLORADO, Wiring Harness for Backup Alarm 2016-2021 Chevrolet Colorado, Harness for Backup Alarm 2016-2021 Chevrolet Colorado, Alarm 2016-2021 Chevrolet Colorado, Chevrolet Colorado, Colorado |
EchoMaster – Aftermarket Vehicle Safety Products for Consumer and Commercial Drivers 
