BRExhaust logo

INSTALLATION INSTRUCTIONS
PART NO. 106-0747

106-0747 2017 Chevrolet Silverado

BRExhaust 106-0747 2017 Chevrolet Silverado

STEP 1:
(Carefully read all instructions before installation) Disconnect the vehicle’s battery before removal of the OEM exhaust system. This will prevent electrical accidents and will reset the computer if it applies to the vehicle. Remove existing exhaust system from the
vehicle. Only remove parts that will be replaced. Clean existing flange with a wire brush to ensure proper sealing.
STEP 2:
Attach [2] Inlet Pipe Assembly to existing exhaust and existing isolator with supplied [1] Clamp.
STEP 3:
Attach [4] Muffler Assembly to [2] Inlet Pipe Assembly and existing isolators with supplied [3] Clamp.
STEP 4:
Attach [6] Over Axle Pipe to [4] Muffler Assembly with supplied [5] Clamp.
STEP 5:
Attach [8] Tail Pipe Assembly to [6] Over Axle Pipe and existing isolator with supplied [7] Clamp.
STEP 6:
Ensure new exhaust is not contacting any portion of the underbody of the vehicle or drivetrain.
STEP 6:
Tighten all clamps starting from rear of the vehicle. (DO NOT EXCEED 30FT-LB WHEN TIGHTENING CLAMP AND CHECK ALL CLAMPS AFTER 50 MILES. RETIGHTEN IF NECESSARY)

WARNING:
When working on, under, or around any vehicle exercise caution.
Please allow the vehicle’s exhaust system to cool before removal, as exhaust temperatures may cause severe burns. If working without a lift, always consult vehicle manual for correct lifting specifications. Always wear safety glasses and ensure a safe work area. Serious injury or death could occur if safety measures are not followed.

BRExhaust 106-0747 2017 Chevrolet Silverado - Symbol 1 BR Exhaust recommends professional installation for all products

Technical Support: 1-800-631-7271
BR Exhaust — 1901 Corporate Ctr, Oceanside, CA 92056
www.brexhaust.com
REV #000 DATE 5/17/2023

Documents / Resources

BRExhaust 106-0747 2017 Chevrolet Silverado [pdf] Instruction Manual
106-0747 2017 Chevrolet Silverado, 106-0747 2017, Chevrolet Silverado, Silverado

References

Leave a comment

Your email address will not be published. Required fields are marked *