DeWitts LOGO

DeWitts 1990-1996 Direct Fit Aluminum Radiators

DeWitts 1990-1996 Direct Fit Aluminum Radiators

Product Information

This product is a cushion modification kit designed for use with a specific model. It includes a thicker core that needs to be installed in the upper cushions of the product. The kit does not require any modification to the lower cushions. The product is manufactured by DeWitts and can be purchased from their website at www.DeWitts.com. For further assistance or inquiries, you can contact DeWitts at 517-548-0600.

Product Usage Instructions

  1. Start by identifying the two upper cushions of the product that need to be modified.
  2. Using a measuring tape or ruler, measure a small piece from each cushion that needs to be trimmed out. The dimensions of the trimmed piece should be 1/4 inch by 2-1/4 inches.
  3. Carefully trim out the measured pieces from the two upper cushions using appropriate tools.
  4. Ensure that the lower cushions remain untouched and do not require any modification.
  5. Once the trimming is complete, insert the new thicker core into the modified upper cushions.
  6. Align the modified upper cushions with the lower cushions to ensure a proper fit.
  7. If provided, follow the additional instructions on installing spacer bars at the designated location.

In order to install the new thicker core, a small piece (1/4” x 2-1/4”) of the two upper cushions must be trimmed out as shown. The lower cushions do not need any modification.DeWitts 1990-1996 Direct Fit Aluminum Radiators 1

For any further assistance or clarifications, refer to the official instruction sheet labeled “32-1139090 INSTRUCTIONS” or contact DeWitts directly.
www.DeWitts.com
517-548-0600

Documents / Resources

DeWitts 1990-1996 Direct Fit Aluminum Radiators [pdf] Instructions
1990-1996 Direct Fit Aluminum Radiators, 1990-1996, Direct Fit Aluminum Radiators, Fit Aluminum Radiators, Aluminum Radiators, Radiators

References

Leave a comment

Your email address will not be published. Required fields are marked *