INTEZZE VIBE Tabletop Bluetooth Speaker
Product Information
Specifications
- Model: VIBE Tabletop Bluetooth Speaker
- Power Supply: Power supply adapter (included)
- Connectivity: Bluetooth, AUX
- Volume Control: +/- buttons with 31 steps
- Charging Output: USB output (5V, 2.4A)
- Wireless Charging: Supported for devices with wireless charging capability
Product Usage Instructions
Speaker Assembly
- Place the speaker body on a flat surface with the bottom facing up.
- Screw the legs into the holes in the bottom of the speaker one by one and tighten lightly.
- Turn the speaker over and place it on a level surface so it stands on its legs.
Turning on the Device for the First Time
To switch to AUX input, plug the included audio cable into the AUX input on the back of the device. The status LED will light up green. Disconnecting the cable will return the device to Bluetooth mode.
Pairing and Listening via Bluetooth
- In Bluetooth mode, connect to an already paired device or switch to pairing mode.
- On your phone, enable pairing and select Intezze VIBE in Bluetooth settings to confirm pairing.
- After successful pairing, you will hear “Connected” and see the status LED turn blue.
Equaliser Setting (EQ)
Press the EQ button to switch between different equaliser modes POP, ROCK, MOVIE, and DEFAULT. Adjust volume using the +/- buttons.
Charging Features
The speaker’s USB output can charge other devices when connected to a power supply. Wireless charging is supported on the top plate for compatible devices.
Frequently Asked Questions (FAQ)
- Q: Can I use the speaker while it is charging other devices?
A: Yes, you can charge other devices through the speaker’s USB output while using the speaker. - Q: How do I know if my device is wirelessly charging on the speaker?
A: An acoustic signal and a charging symbol displayed on your phone confirm that wireless charging is active when placed correctly on the top plate of the speaker.
TABLETOP BLUETOOTH SPEAKER
www.intezze.com / info@intezze.com
Package contents
- Speaker body
- Speaker legs x 4
- Power supply cable
- Power supply adapter
- Protective pads x 4
- 3.5 mm AUX audio cable
Speaker assembly
- Place the speaker body on a flat and clean surface. The bottom of the speaker must face up.
- Screw the legs into the holes in the bottom of the speaker one by one. Tighten lightly.
- Turn the speaker over and place it on a level surface, so it stands on its legs.
Description of parts and controls
The control buttons are located under the top panel, which can be moved by turning in both directions up to 170°.
- Touch button: ON/OFF/TWS
- Touch button: Play/Pause
- Touch button: Volume down
- Touch button: Volume up
- Touch button: Equaliser setting
- Place for wireless phone charging
- USB charging connector (5 V, 2.4 A)
- Input for power supply adapter
- AUX IN audio input
Turning on the device for the first time
- Plug the included charging adapter into the power connector on the back of the speaker and then into a 230 V socket. You will hear “Intezze On” and the speaker will automatically switch to Bluetooth – pairing mode. You will hear “Pairing”.
- To turn the device ON/OFF again, just press and hold the ON/OFF touch button (1) until you hear “INTEZZE On”, or “INTEZZE Off”.
- After switching on, the speaker will connect to the last paired device or switch to Bluetooth – pairing mode.
Automatic switching to AUX input
- Plug the included audio cable into the AUX input (9) on the back of the device. The device will automatically switch to AUX mode, and the status LED will light up green. This automatically disables Bluetooth mode.
- After disconnecting the cable, the device will return to Bluetooth mode, which is also confirmed by the relevant message “Bluetooth” or “Pairing”.
Pairing and listening via Bluetooth
- In Bluetooth mode, the device will either connect to an already paired device or switch to pairing mode. In this case, the blue LED will quickly flash blue.
- On your phone, enable pairing in the automatically displayed menu, or select available BT devices in the Bluetooth settings and search for Intezze VIBE. Confirm pairing.
- After successful pairing, you will hear “Connected” and the status LED will turn blue.
If you are playing music from your phone via Bluetooth, you can use the Play/Pause (2) button to pause and resume playback. By pressing and holding the Play/Pause button (2) for a long time, the paired phone will be disconnected (you will hear “Disconnected” and then “Pairing”). It is now possible to connect/pair another device (the original device remains paired and can be connected again).
- In Bluetooth mode, the device will either connect to an already paired device or switch to pairing mode. In this case, the blue LED will quickly flash blue.
- On your phone, enable pairing in the automatically displayed menu, or select available BT devices in the Bluetooth settings and search for Intezze VIBE. Confirm pairing.
- After successful pairing, you will hear “Connected” and the status LED will turn blue.
If you are playing music from your phone via Bluetooth, you can use the Play/Pause (2) button to pause and resume playback. By pressing and holding the Play/Pause button (2) for a long time, the paired phone will be disconnected (you will hear “Disconnected” and then “Pairing”). It is now possible to connect/pair another device (the original device remains paired and can be connected again).
Equaliser Setting (EQ)
The EQ button (5) is used to switch between the different equaliser modes. By default, after switching on the device, the DEFAULT mode is selected without sound equalisation (the middle LED is off).
By quickly pressing the EQ button (5) you activate all sound modes in this order: 
Adjusting the volume
- Press the + (4) button to increase the volume of the speaker by 1 step.
- Press the – (3) button to decrease the volume of the speaker by 1 step.
- Each time the volume changes, the LED flashes white.
- There are 31 volume steps available.
- When the maximum volume is reached, “Maximum volume” will be heard.
Charging through the USB output of the speaker
- If the speaker is connected to a 230 V network, the USB output (7) on the back of the speaker can be used to charge other devices (phones, tablets, etc.). The maximum charging current is 2.4 A (5 V).
- Connected devices also charge when the speaker is turned off. However, it must be connected to the power supply.
Wireless charging on the top plate
- You can also charge phones and tablets that support wireless charging by placing it on the wireless charging symbol on the top turning plate of the speaker (6).
- Correct placement of the device being charged and activation of the charging process is confirmed by an acoustic signal and the charging symbol is displayed on the phone.
- To stop charging, simply remove the phone from the charging point at any time.
Speaker automatic switch-off
- The speaker automatically turns off after 10 minutes of inactivity if it is not connected to any device via Bluetooth or the AUX jack cable.
- Automatic switch-off is confirmed by the message “INTEZZE Off”.
Pairing two speakers – stereo (TWS) 
- Turn on both paired speakers and quickly press the ON/TWS button twice (1) on one of them. The speakers will switch into group pairing mode (“Pairing” will be heard and the orange LED will start flashing quickly).
- Once the speakers are paired, you will hear “Connected” and the LED on the main speaker will turn orange. The slave speaker will slowly flash orange.
- You can exit two speaker pairing mode (TWS) by briefly pressing the ON/TWS button (1). You will hear “Disconnected”.
Speakers paired in TWS stereo mode can receive a signal via Bluetooth as well as via the jack cable connected to the AUX input. The cable must be connected to the main speaker (lit orange). AUX connection on the slave speaker (flashing orange) is not possible. For listening via Bluetooth, the main speaker must also be paired with the phone (see the Pairing chapter).
Note: You can change the equaliser mode by pressing the EQ button (5) on one of the speakers.
Caution
- The maximum load capacity of the speaker top plate is 5 kg. A heavier load may damage the speaker.
- The speaker is not allowed to be used for seating adults or children.
- For power supply, use the original power supply included in the package.
- Do not install the speaker in places exposed to: direct sunlight, extreme temperatures, and excessive dust. There is a risk of damage to the device or injury.
- The speaker is not for use in outdoor areas. It is not waterproof and may also be damaged by long-term high humidity.
- Use a soft, dry cloth to clean the speaker. The use of chemicals such as benzine, solvents, detergents, or chemical cleaning cloths may cause discolouration or deformation of the device.
- Do not do anything that could damage the delivered power supply: do not place it near heat sources, do not bend it excessively or interfere with it in any way, and do not place heavy objects on it.
- Using a power supply cable with damaged insulation where the wire is visible may cause electric shock or fire.
- Never disassemble or repair the speaker.
- We recommend keeping the original packaging for at least 14 days in order to return the product within the 14-day period. This will minimise the possibility of damage to the product during transport.
- Do not expose yourself to high volumes for long periodsof time. Otherwise, hearing loss may occur. Avoid listening for more than 40 hours a week at 80 dB or more than five hours a week at 89 dB. Contact your doctor if you experience any hearing impairment.
Warranty conditions
The warranty does not cover the following situations:
- Damage caused by tampering with the device.
- Physical damage to the device caused by a fall or impact.
- Damage caused by force majeure.
- Damage caused by improper connection or use of the device contrary to the operating instructions.
Specifications
- Bluetooth version: BT 5.0
- RMS Power: 65 W
- Amplifier: Class D
- Drivers: 1x 165 mm (bass), 2x 70 mm (mid-range), 2x 31 mm (treble)
- Frequency range: 45 – 18.000 Hz
- Signal-to-noise ratio: >75 dB
- Separation: >55 dB
- Power supply: DC 18 V, 3.5 A
- USB output: 5 V, 2.4 A
- Wireless charging: 10 W (9 V, 1 A)
- Input: AC 100–240 V, 50–60 Hz, 1.5 A
All information in this document is subject to change
Are you in trouble? Do not be afraid to contact us, we will be happy to help: info@intezze.com
Documents / Resources
 |
INTEZZE VIBE Tabletop Bluetooth Speaker [pdf] User Manual VIBE Tabletop Bluetooth Speaker, VIBE, Tabletop Bluetooth Speaker, Bluetooth Speaker, Speaker |
Why wireless TWS headphones | Intezze 