dahl 521-23L-30 Male Press Valve
Instructions for 521-23L-30
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
PROPRESS: Install per connector manufacturer’s instructions.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer’s instructions; Special ring, nut, or insert may be required.
Documents / Resources
 |
dahl 521-23L-30 Male Press Valve [pdf] Instructions 521-23L-30 Male Press Valve, 521-23L-30, Male Press Valve, Press Valve, Valve |
