SM-810 Commercial
Spin Bike
USER MANUAL
30 DAY FREE TRIAL
*Terms and conditions apply. offer can be rescinded at any time.
SM-810 Commercial Spin Bike
https://www.lifespanfitness.com.au/pages/kinomap-trial
Find the Digital Manual Online
https://www.lifespanfitness.com.au/pages/product-manuals
Product may vary slightly from the item pictured due to model upgrades.
Read all instructions carefully before using this product.
Retain this owner’s manual for future reference.
NOTE:
This manual should not be used to guide your purchasing decision. Your product, and the contents inside its carton, may vary from what is listed in this manual. This manual may also be subject to updates or changes. Updated manuals are available through our website at www.lifespanfitness.com.au
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Read all instructions before using this machine.
It is important your machine receives regular maintenance to prolong its useful life. Failing to regularly maintain your machine may void your warranty.
Please always keep this manual with you.
- It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. PLEASE NOTE: It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions
- Before starting any exercise program, you should consult your doctor to determine if you have any medical or physical conditions that could put your health and safety at risk, or prevent you from using the equipment properly. Your doctor’s advice is essential if you are taking medication that affects your heart rate, blood pressure or cholesterol level.
- Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, and extreme shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you do experience any of these symptoms, you should consult your doctor before continuing with your exercise program.
- Keep children and pets away from the equipment. This equipment is designed for adult use only.
- Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To ensure safety, the equipment should have at least 2 meters of free space around it.
- Before using the equipment, check that the nuts and bolts are securely tightened. If you hear any unusual noises coming from the equipment during use and assembly, stop immediately. Do not use the equipment until the problem has been rectified.
- Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may get caught vin the equipment or that may restrict or prevent movement.
- This equipment is designed for indoor and family use only.
- Care must be taken when lifting or moving the equipment so as not to injure your back.
- Always keep this instruction manual and assembly tools at hand for reference.
- The equipment is not suitable for therapeutic use.
- The pulse or heart rate sensors are not medical devices. Various factors, including the user’s movement, may affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in determining heart rate trends in general.
CARE INSTRUCTIONS
IMPORTANT
a. All nuts and bolts are to be checked and tightened on a regular basis. This includes pedals and other moving parts. Failure to do so may cause damage to your threads and void your warranty.
b. Lubricate moving joints after periods of usage.
c. Be careful not to damage plastic or metal parts of the machine with heavy or sharp objects.
d. The machine can be kept clean by wiping it down using dry cloth.
PARTS LIST
| No. | Description | Specs | Qty |
| 1 | Main Frame | Weldment | 1 |
| 2 | Belt Board Assembly | Weldment | 1 |
| 3 | Handlebar | Weldment | 1 |
| 4 | Connecting Plate Assembly | Weldment | 1 |
| 5 | Vertical Seat Post | Weldment | 1 |
| 6 | Connecting Bar Assembly | Weldment | 1 |
| 7 | Handlebar Connection Assembly | Weldment | 1 |
| 8 | Magnetic Holder | Weldment | 1 |
| 9 | Brake Pole | Weldment | 1 |
| 10 | Seat Post | Weldment | 1 |
| 11 | Front Stabilizer | Weldment | 1 |
| 12 | Rear Stabilizer | Weldment | 1 |
| 13 | Adjustment Buckle | Weldment | 1 |
| 14 | Motor Cable Holder | δ2 | 1 |
| 15 | Motor Cover Assembly | Weldment | 1 |
| 16 | Power Fixing Plate | δ2 | 1 |
| 17 | Handlebar Post | 80*40*2.5 | 1 |
| 18 | Compression Spring | Φ1.5*66.5 | 1 |
| 19 | Aluminum Handle | 80*16*10 | 2 |
| 20 | Long Shaft | Ф5*56 | 1 |
| 21 | Step Shaft | Ф8*50.5 | 1 |
| 22 | Spacer | Ф8*Ф5.2*20 | 1 |
| 23 | Fixed Shaft | Ф8*16 | 1 |
| 24 | Short Shaft | Ф5*23 | 1 |
| 25 | Fixing Frame | 65*27.5*23.5 | 1 |
| 26 | Little Spring | φ8Xφ0.8X50 | 1 |
| 27 | Magnet | 30*15*10 | 6 |
| 28 | Flywheel | 20KG*Φ460*46 *89*5PK | 1 |
| 29 | Fixing Nut | M25*1 | 1 |
| 30 | Crank Axle | φ25*182 | 1 |
| 31 | Metal Tube | φ30*φ25.05*9 | 1 |
| 32 | Inner Metal Tube | φ30*φ25.05 *56.1 | 1 |
| 33 | Left Crank | 170*42.5 | 1 |
| 34 | Right Crank | 170*42.5 | 1 |
| 35 | Nut Block | Φ25*10.5 | 1 |
| 36 | Little Spring | φ1X11.5 | 1 |
| 37 | L Knob | M10*20 | 1 |
| 38 | Flywheel Shaft | Φ17*155*3* 89*M12*1.25 | 1 |
| 39 | Pressure Pulley | φ43*28 | 1 |
| 40 | Wrench | 132*28/33*t6 | 1 |
| 41 | Little Compression Spring | φ1.0X55 | 1 |
| 42 | Belt Pulley | φ200*24 | 1 |
| 43 | Adjustment Nut | 1 | |
| 44 | Bottle Holder | φ6 | 1 |
| 45 | Electronic Line | L=235MM | 1 |
| 46 | 6# Hexagonal Wrench | 6 mm | 1 |
| 47 | 5# Hexagonal Wrench | 5 mm | 1 |
| 48 | Bearing 6001ZZ | 6001ZZ | 2 |
| 49 | Bearing 6005ZZ | 6005ZZ | 2 |
| 50 | Bearing 6203RS | 6203RS | 3 |
| 51 | Bearing 608ZZ | 608ZZ | 4 |
| 52 | Hex Flange Nut | M12X1.25 | 2 |
| 53 | Little Hex Flange Nut | M12X1.25 | 2 |
| 54 | Cap Nut | M8 | 4 |
| 55 | Lock Nut M5 | M5 | 1 |
| 56 | Lock Nut M8 | M8 | 7 |
| 57 | Lock Nut M10 | M10 | 1 |
| 58 | Hex Nut | M8 | 1 |
| 59 | Hex Socket Head Screw M4*8 | M4*8 | 6 |
| 60 | Hex Socket Head Screw M6*10 | M6*10 | 3 |
| 60 | Hex Socket Head Screw M6*12 | M6*12 | 4 |
| 61 | Hex Socket Head Screw M8*45 | M8*45 | 1 |
| 62 | Carriage Bolt | M8X62 | 4 |
| 63 | Hex Socket Countersunk Head Screw | M8*18 | 4 |
| 64 | Hex Head Bolt | M8*40 | 2 |
| 65 | Internal Hex Socket Head Screw M6*10 | M6*10 | 2 |
| 66 | Internal Hex Socket Head Screw M8*10 | M8*10 | 2 |
| 67 | Internal Hex socket Head Screw M8*15 | M8*15 | 6 |
| 68 | Phillips Countersunk Head Screw | M5*12 | 12 |
| 69 | Cross Self-drilling and Self-tapping Screw | ST4.2X19 | 6 |
| 70 | Phillips Pan Head Self-tapping Screw ST2.9*9.5 | ST2.9*9.5 | 9 |
| 71 | Phillips Pan Head Self-tapping Screw ST4.2X9.5 | ST4.2X9.5 | 7 |
| 72 | Phillips Pan Head Self-tapping Screw ST4.2*19 | ST4.2*19 | 2 |
| 73 | Phillips Pan Head Self-tapping Screw ST4.2*16 | ST4.2*16 | 9 |
| 74 | Phillips Countersunk Head Self-tapping Screw | STA.2×9.5 | 4 |
| 75 | Phillips Pan Head Screw M4*12 | M4*12 | 4 |
| 76 | Phillips Pan Head Screw M5*10 | M5*10 | 4 |
| 77 | Flat Washer 5 | 5 | 5 |
| 78 | Flat Washer 6 | 6 | 7 |
| 79 | Flat Washer 8 | 8 | 12 |
| 80 | Large Washer | 10 | 1 |
| 81 | Elastic Washer 6 | 6 | 4 |
| 82 | Elastic Washer 8 | 8 | 10 |
| 83 | Retaining Ring Φ10 | Φ10 | 1 |
| 84 | Retaining Ring Φ12 | Φ12 | 1 |
| 85 | Retaining Ring Φ17 | Φ12 | 2 |
| 86 | Waveform Washer 12 | d1=12 D=16 s=0.3 | 1 |
| 87 | Waveform Washer 17 | d1=17 D=23 s=0.3 | 1 |
| 88 | Retaining Ring 3 | 3 | 1 |
| 89 | Fixed Plate | δ2.5 | 2 |
| 90 | Outer Chain Cover | 756*283*71 | 1 |
| 91 | Inner Chain Cover | 743*277*17 | 1 |
| 92 | Upper Cover | 115*56*12.5 | 1 |
| 93 | Front Bushing | 257*48*46 | 1 |
| 94 | Rear Bushing | 332*65*46 | 1 |
| 95 | U-shaped Handle Cover | 70*58*20 | 1 |
| 96 | Brake Knob | M10*100 | 1 |
| 97 | Square Spacer | 20.6*20.6*16 | 1 |
| 98 | Flexible Tube | φ40.6*60 | 1 |
| 99 | Lower Rail Decorative Cover | 19*59.5*23 | 2 |
| 100 | Upper Rail Decorative Cover | 19*59*25 | 2 |
| 101 | Brake Positioning Sleeve | 25*25*27 | 1 |
| 102 | Left Flywheel Cover | 212*139.5*58 | 1 |
| 103 | Bushing | 80*40 | 1 |
| 104 | Plastic Strip | 30*79*4 | 1 |
| 105 | Stopper | φ52*43, M8X25 | 4 |
| 106 | Adjustment Knob | φ60*80 (M16*1.5) | 1 |
| 107 | Pedal | JD-037V 9/16″- SPD | 1 |
| 108 | Small Bushing | φ18*φ10*10 | 2 |
| 109 | Plastic Plug | φ14*14 | 1 |
| 110 | Saddle | C-3604 | 1 |
| 111 | Flywheel Installation Cover | φ59*35 | 1 |
| 112 | Wheel | φ69X26 | 2 |
| 113 | Crank Cap | φ28*6.5 | 2 |
| 114 | Oval Plug | 100*50*2 | 4 |
| 115 | Belt | 5PK53.5INCH, L=1360mm | 1 |
| 116 | Computer Upper Cover | 319*100*126 | 1 |
| 117 | Computer Lower Cover | 319*100*140 | 1 |
| 118 | Upper IPAD Holder | 215*155*5 | 1 |
| 119 | Lower IPAD Holder | 220*160*41.7 | 1 |
| 120 | EVA Pad | T1*212.8*152.9 | 1 |
| 121 | Woolly Block | 30*17*12MM | 1 |
| 122 | Display | 1 | |
| 123 | Wire Pulling Motor | 1 |
ASSEMBLY INSTRUCTIONS
STEP 1: Assemble Front and Rear Stabilizers
A. Attached the Front Stabilizer (pt.11) to the Main Frame (pt.1), Lock the Front Stabilizer on the Main frame with 2pcs of Carriage Bolts (pt.62) and 2pcs of Flat Washers (pt.79) and 2pcs of Domed Nut (pt.54).
B. Use the same way to lock the Rear Stabilizer (pt.12) on the Main frame.
Please make sure you lock the Front stabilizer and Rear Stabilizer firmly on the Main Frame.
STEP 2: Assemble Handlebar Connection
A. Unscrew the Adjustment knob (pt.106), connect the line B in the Handlebar connection assembly (pt.07) to the line A in the main frame (pt.1), and insert the Handlebar connection assembly (pt.07) into the main frame, and lock the Adjustment knob (pt.106).
NOTE: The Adjustment knob (pt.106) needs to be aligned with the hole of the Handlebar connection assembly (pt.07) and tightened clockwise.
STEP 3: Assemble Handlebar
A. Use tool 5# Hexagonal wrench (pt.47) to secure Flat Washer 6 (pt.78) 4PCS, Elastic washer 6 (pt.81) 4PCS, and Hex socket head screw M6*12 (pt.60) 4PCS to connect the Handlebar (pt.3) to the Handlebar connection assembly (pt.07), as shown in FIG.3.
B. Connect line A and line B together.
STEP 4: Assemble Bottle Holder
A. Lock the Bottle holder (pt.44) on the main frame with Cross self-drilling and self-tapping screw (pt.69) 2pcs and Flat Washer 5 (pt.77) 2pcs.
STEP 5: Assemble Saddle
A. Place the Saddle (pt.110) horizontally, as shown in FIG.5, use 2x Wrench (pt.40) to tighten the nuts on both sides at the same time. Do not tighten the nut on one side only as this will not fully secure seat.
STEP 6: Assemble Peddle
Caution: Installing the pedals on the wrong side, tightening it the wrong way, or not fully tightening before use will strip the thread on the cranks and pedals. Read instructions carefully.
A. As shown in the picture on the, install the pedals (pt.107R) with right-side crank and tighten it clockwise.
B. Install the left pedal (pt. 107L) on the left side crack and tighten it counterclockwise.
C. Use the tool Wrench (pt.40) to fully tighten it, ensure it is threaded all the way.
STEP 7: Plug to Power
The equipment is now fully set up and you can now plug it into power.
The plug socket is located at the back of the machine, on the bottom section (refer to image).
SEAT & HANDLEBAR ADJUSTMENT
UP/DOWN
To adjust the seat height, hold onto the seat and pull the seat post up to your desired height.
To lower it you will need to pull the release lever underneath the seat up and while holding the lever, push the seat down, then release the lever to lock into position.
CAUTION: We recommend to not sit on the seat when pulling up the release lever up as the added weight can jam the release lever
FORWARD/BACKWARD
The Adjusting lever under the seat acts like a wrench.
To loosen:
Loosen the adjusting handle under the seat by turning it fully to the left side then pull the lever down and move it back to the right side. Let go of the lever so it slots back into the bolt and then turn to the left again. Continue doing this until the bolt is loosen enough for you to move your seat.
To tighten:
Once you have set the position you want, tighten by pulling the lever down and move it to the left side.
Release the lever until it clicks to the bolt and then turn the lever to the right.
Repeat by going back to the left side until the seat is fully locked into place.
HANDLEBAR ADJUSTMENT
To adjust the handlebar height, slacken the spring knob and pull it back. Slide the handlebar post along the housing on the main frame to the desired height and, with the holes aligned correctly, tighten the spring adjusting knob.
EMERGENCY STOP
On the machine frame there is an emergency knob. Push down on the knob to stop the pedaling motion.
OPERATION GUIDE
1.1 DISPLAY FUNCTIONS
| Item No. | Items | Display | Description |
| 1 | Full View |  |
1. Display Resistance levels (Levels 1-32) 2. Display work out data “SPEED”, “TIME”, “DISTANCE”, “CALORIE” 3. Display Bluetooth status |
| 2 | Scan Mode |  |
On scan mode the data will show: 1. Small window for resistance level 2. SPEED, TIME, DISTANCE and CALORIE will appear on the main window and will change in rotation. 3. Bluetooth status indicator |
| 3 | Lock Mode |  |
To lock a data you wish to view (rather then SCAN MODE), press down on the knob display to the data you wish to view – SPEED, TIME, DISTANCE, CALORIE. On the small window, the resistance level is shown. |
| 4 | E01 Code |  |
Purpose: To prevent assembly errors and damage to the entire electronic component set caused by extremely rare abnormal parts, an E01 detection mechanism for the cable motor is added. Issue: The shuttle cannot properly recognize the motor’s rotation state. Possible reasons include: 1. Check whether the motor wire rope is stuck and if the motor resets normally after power-on. 2. Verify if the wire is loose or if the wire plug is skewed. 3. Ensure that the motor pulling force is sufficient at the extreme position to prevent failure to reset to 1st gear normally. To verify, immediately adjust to the middle gear after power-on to check for any recurring errors. 4. Shuttle components may be damaged, though this is highly improbable. 5. Cable could be damaged. |
1.1 DISPLAY INSTRUCTIONS
| Item No. | Items | Display | Description |
| 1 | Awaken Device |  |
1. In sleep mode, the display is off. 2. The knob will turn on either upon being pressed or upon detecting any motion. |
| 2 | Press Knob |  |
1. The knob display enters sleep mode after 3 minutes of inactivity. 2. Press the knob to turn on the device from sleep mode. 3. Press the knob to initiate the device in wake-up mode. 4. Press the knob to switch display modes during exercise. 5. Long-press the knob for 2 seconds to reset data and transition to wake-up mode. 6. A buzzing sound accompanies pressing the knob. |
| 3 | Rotate Knob |  |
1. Rotate the knob clockwise to increase resistance. 2. Rotate the knob anticlockwise to decrease resistance. 3. There is a buzzing sound when the knob is rotated. |
1.3 DETAILED OPERATING INSTRUCTIONS
Upon powering on the knob display, the BUZZER will emit a long beep, the knob display will illuminate, and the device will enter the READY state (as depicted in Figure 1). Additionally, after power-on, the resistance will automatically reset to the “1” gear. If there is no operation within 1 minute, the device will initiate an automatic reset, clearing the data.
Furthermore, in the absence of any operation for 3 minutes, the display will completely turn off, transitioning into standby mode (as illustrated in Figure 2).
While in the READY state, press the knob or commence pedaling to access the exercise mode. The small window will display “LEVEL” every 3 seconds (as depicted in Figure 3).
The main window numbers are initially set to a carousel display featuring the illuminated “SCAN” icon.
The display cycles through “Speed,” “Time,” “Distance,” and “Calories” every 3 seconds, as illustrated in Figure 5, Figure 6, Figure 7, and Figure 8.
Pressing the knob allows you to switch the display mode to lock mode. In this mode, the “SCAN” icon is not shown, and the display remains fixed, showing one of the following data: “Speed,” “Time,” “Distance,” or “Calories,” as depicted in Figure 9, Figure 10, Figure 11, and Figure 12.
1.4 DISPLAY ICON DESCRIPTIONS
| Item No. | Items | Display | Description |
| 1 | Resistance Level |  |
1 ~ 32 The higher the level, the greater the resistance |
| 2 | SCAN |  |
If Selected: Indicates that the data is in carousel mode. If Not Selected: Indicates that the data is in lock mode of the Data you are viewing. |
| 3 | Speed |  |
0.0 ~ 99.9 km/h 60 RPM – 21.5 kilometers/hour. |
| 4 | Time |  |
0:0 ~ 99:5 In wake-up mode, timing commences with a quick press of the knob or upon detecting movement, and the timing ceases 4 seconds after movement comes to a halt. |
| 5 | Distance |  |
0.0 ~ 999 km |
| 6 | Calories |  |
0.0~999kcal There is a direct proportional relationship with the resistance level. For instance, Resistance 1 corresponds to 11.4 kcal/kilometer, whereas Resistance 32 corre- sponds to 44.6 kcal/kilometer. |
| 7 | Bluetooth Icon |  |
If Displayed: Bluetooth is connected. If Not Displayed: Bluetooth is not connected. |
EXERCISE GUIDE
PLEASE NOTE:
Before beginning any exercise program, consult your physician. This is important especially if you are over the age of 45 or individuals with pre-existing health problems.
The pulse sensors are not medical devices. Various factors, including the user’s movement, may affect the accuracy of heart rate readings. The pulse sensors are intended only as an exercise aid in determining heart rate trends in general.
Exercising is great way to control your weight, improving your fitness and reduce the effect of aging and stress. The key to success is to make exercise a regular and enjoyable part of your everyday life.
The condition of your heart and lungs and how efficient they are in delivering oxygen via your blood to your muscles is an important factor to your fitness. Your muscles use this oxygen to provide enough energy for daily activity. This is called aerobic activity. When you are fit, your heart will not have to work so hard. It will pump a lot fewer times per minute, reducing the wear and tear of your heart.
So as you can see, the fitter you are, the healthier and greater you will feel.
WARM UP
Start each workout with 5 to 10 minutes of stretching and some light exercises. A proper warm-up increases your body temperature, heart rate and circulation in preparation for exercise. Ease into your exercise.
After warming up, increase the intensity to your desired exercise program. Be sure to maintain your intensity for maximum performance. Breathe regularly and deeply as you exercise.
COOL DOWN
Finish each workout with a light jog or walk for at least 1 minute. Then complete 5 to 10 minutes of stretching to cool down. This will increase the flexibility of your muscles and will help prevent postexercise problems.
WORKOUT GUIDELINES
This is how your pulse should behave during general fitness exercise. Remember to warm up and cool down for a few minutes.
WARRANTY
AUSTRALIAN CONSUMER LAW
Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Full details of your consumer rights may be found at www.consumerlaw.gov.au.
Please visit our website to view our full warranty terms and conditions: http://www.lifespanfitness.com.au/warranty-repairs
WARRANTY AND SUPPORT
Any claim against this warranty must be made through your original place of purchase.
Proof of purchase is required before a warranty claim may be processed.
If you have purchased this product from the Official Lifespan Fitness website, please visit https://lifespanfitness.com.au/warranty-form
For support outside of warranty, if you wish to purchase replacement parts or request a repair or service, please visit https://lifespanfitness.com.au/warranty-form and fill in our Repair/Service Request Form or Parts Purchase Form.
Scan this QR code with your device to go to lifespanfitness.com.au/warranty-form
Documents / Resources
 |
LIFESPAN FITNESS SM-810 Commercial Spin Bike [pdf] User Manual SM-810 Commercial Spin Bike, SM-810, Commercial Spin Bike, Spin Bike, Bike |
References
-
Product Support Forms – Lifespan Fitness
-
Home | Consumer Law
-
Lifespan Fitness | Treadmills, Cardio and Strength Equipment
-
Warranty & Repairs - Gym Equipment – Lifespan Fitness
-
Product Support Forms – Lifespan Fitness
- User Manual
