Genmitsu GGW-U232 Wireless Control Module
Product Information
Specifications:
- Model: Genmitsu Wireless Control Module
- Version: V1.0 Apr. 2024
- Dimensions: 54mm x 54mm
- Includes: GGW-U232, GGW-UART, GGW-JTAG modules
- Compatible with various Genmitsu PRO and PROVer series models
Product Usage Instructions
Install the Wi-Fi Module
Prerequisites: Insert the SD card into the Wi-Fi boards.
Situation 1: Connect Externally Compatible Models
- PRO Series: 3018-PRO, 3020-PRO MAX
- PROVer Series: 3018-Prover, PROVerXL Series: PROVerXL 4030, PROVerXL 4030 V2, PROVerXL 6050 Plus
- Follow specific instructions for each model as outlined in the user manual.
Situation 2: Connect from Back
- PRO Series: 3020-PRO MAX V2, 4040-RENO, 4040-PRO
- PROVer Series: 3018 PROVer V2, 3030 PROVer Max
- Details on connecting to each model are provided in the manual.
Genmitsu APP Setup
STEP 1. APP Download
- Search for “Genmitsu” in the Google Play Store or Apple App Store.
- Download and install the app.
- Note: The module supports 2.4G Wi-Fi only.
STEP 2. Wi-Fi Setting
- Open the app and connect to the Wi-Fi network named “Gmt_Grbl_xxx”.
- Configure the network settings as prompted in the app.
- Select your desired Wi-Fi network, enter the password, and wait for configuration completion.
- Switch back to your selected Wi-Fi network once configuration is successful.
Frequently Asked Questions (FAQ)
Q: How do I know if my model is compatible with the Genmitsu Wireless Control Module?
A: Check the list of compatible models provided in the user manual or contact customer support for assistance.
Q: What should I do if I encounter connection issues during setup?
A: Ensure you are following the correct steps as outlined in the user manual. If issues persist, contact customer support for troubleshooting.
Unboxing
(Upon opening the box, please check the contents of the box against the list below. This user manual covers different models of Wi-Fi Modules so make sure to check the right list and follow the corresponding instructions.)
Install the Wi-Fi Module
Prerequisites: Insert the SD card into Wi-Fi boards.
Situation 1: Connect Externally
Compatible Models:
- PRO Series: 3018-PRO, 3020-PRO MAX
- PROVer Series: 3018-Prover
- PROVerXL Series: PROVerXL 4030, PROVerXL 4030 V2, PROVerXL 6050 Plus
See below for how to connect the PROVer XL 6050, but the same process applies for the 4030 and 4030 V2 as well.
See below for how to wire the 3020 Pro Max V1, and also works on the 3018 Pro.
How to connect to a 3018 PROVer V1.
Situation 2: Connect from Back
- PRO Series: 3020-PRO MAX V2, 4040-RENO, 4040-PRO
- PROVer Series: 3018 PROVer V2, 3030 PROVer Max
(Please note that 4040-PRO requires a new mainboard that supports Wi-Fi serial ports.
Check details on our product page.)
- Remove the case and rear plane screws and locate the 4-pin connector on the rear of the mainboard.
- Insert the cable through the open case channel and plug it into the connector as shown.
- Install the case back on.
Note: See below for how to connect the 4040 Reno.
Genmitsu APP Setup
STEP 1. APP Download
Find in the Google app store or Apple app store by searching for Genmitsu.
Download and setup.
Note: Support 2.4G Wi-Fi only.
STEP 2. Wi-Fi Setting (Only the first time the module is linked or Wi-Fi needs to be reconfigured after replacement)
- Open the app and click the
icon on the home interface. - Select the Wi-Fi named Gmt_Grbl_xxx and connect, wait for the exclamation point in the icon to disappear. (Ignore the no connection message.)
- Go back to APP, click
to the network configuration. - When the wireless module is lights up blue, click
to enter Wi-Fi network configuration. - Select the Wi-Fi network you need, enter the password, and then click
Wait about 30 seconds.
- After the machine is successfully configured, switch back to the Wi-Fi network you just selected.
- Go back to the APP, you will now find modules that have been configured for the network and are waiting to be connected.
- Click
. When it turns green, the module is connected successfully.
Then click
to enter the control interface.
FCC compliance statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
If you need any assistance, please contact us via:
Email: support@sainsmart.com
Facebook messenger: https://m.me/SainSmart
Help and support is also available from our Facebook Group
Vastmind LLC, 2330 Paseo Del Prado, C303, Las Vegas, NV 89102
Documents / Resources
 |
Genmitsu GGW-U232 Wireless Control Module [pdf] User Guide GGW-U232, GGW-UART, GGW-JTAG, GGW-U232 Wireless Control Module, Wireless Control Module, Control Module, Module |
