MENTALAB LOGO

MENTALAB Explore Unlock the Brain with Cutting Edge Biosensor

MENTALAB-Explore-Unlock-the-Brain-with-Cutting-Edge-Biosensor-PRODUCT

Product Information

The Mentalab Explore is a versatile, high-end device for biomedical recordings. It offers research-grade precision in a mobile format. With a 12-hour battery life, 1kHz sampling rate, 24-bit resolution, and 9-axis motion data, it provides exceptional performance. The device can stream data to Bluetooth for real-time analysis at a range of over 10 meters. It also has internal memory for offline recording and comes with extensive open-source software.

Technical Specifications

  • No. of channels: 4 or 8
  • Sampling rates: 250 (default), 500, 1000 Hz
  • Dimensions: 41 x 42 x 17 mm
  • Battery life: Up to 8 hours online, 12 hours offline
  • Input impedance: 1 G
  • Resolution: USB output interface USB 2.0
  • Additional sensors: Gyro-, accelero- and magnetometer (20 Hz), Device temperature, battery (1 Hz)
  • Flash memory size: 512 MB
  • Bluetooth range: Approximately 10 meters

Product Usage Instructions

  1. Charge the device via USB. A green LED indicates sufficient battery. Disconnect from the power source prior to use.
  2. Connect the cable set to the device and place the electrodes on the body. Each channel records against a unipolar reference electrode. Follow the electrode order shown in the user manual. Use the Velcro strap to secure the device to an EEG cap.
  3. Push the power button to start the device. It will now record data to internal memory, if present.
  4. Two blue blinks per second indicate that the device is visible via Bluetooth. The device’s Bluetooth name is Explore_XXXX. The last four digits on the device’s label are its Bluetooth ID.
  5. Once a Bluetooth connection to the host machine has been established, the Explore device will start transferring data via Bluetooth. Use Explore’s open-source APIs to access impedance values, visualize the signal stream, change device settings, and more.
  6. Press the device button once to set a mark during the recording. A pink LED signal indicates that a marker has been set.
  7. Turn off the device after use. To do so, hold the power button for three seconds until the LED blinks red three times. Always shut down the device before connecting it to USB.

Note: For more detailed information regarding safety and usage, please refer to the user manual. Additional guidelines and instructional videos can be found at mentalab.com.

Overview

Thank you for purchasing a Mentalab Explore device.

MENTALAB-Explore-Unlock-the-Brain-with-Cutting-Edge-Biosensor-FIG-1Mentalab Explore is a versatile, high-end solution for biomedical recordings that provides research-grade precision in a mobile format.

MENTALAB-Explore-Unlock-the-Brain-with-Cutting-Edge-Biosensor-FIG-2

  • Enjoy a 12h battery life, 1kHz sampling rate, 24 bit resolution, and 9-axis motion data.
  • Stream data to Bluetooth for real-time analysis at over 10 meters.
  • Record to internal memory and work offline using our extensive open-source software.

Getting started

This guide contains basic information to start streaming and recording data with your Mentalab Explore device.
For more extensive information regarding safety and usage, please refer to the user manual. Further guidelines and instructional videos can be found at mentalab.com.

Package contents

  • Mentalab Explore device in shockproof case.
  • USB 2.0A to micro-USB cable.
  • Electrode sets and caps of your choice.
  • Electrode gel and cleaning solution (optional).

Device configuration

  • Your Explore device’s configuration is encoded on the device label on the back of the device.
  • An 8-channel device without flash memory and Bluetooth name “Explore_1438” would appear as follows:

MENTALAB-Explore-Unlock-the-Brain-with-Cutting-Edge-Biosensor-FIG-3

Technical specifications

  • No. channels 4, 8
  • Sampling rates 250 (default), 500, 1000 Hz
  • Dimensions 41 x 42 x 17 mm
  • Battery life Up to 8 hr online, 12 hr offline
  • Differential input range ± 400 mV
  • Input impedance 1 GΩ
  • Resolution 24 bit resolution, 0.4 μVrms noise
  • USB output interface USB 2.0
  • Additional sensors Gyro-, accelero- and magnetometer: 20 Hz Device temperature, battery: 1 Hz
  • Flash memory size 512 MB
  • Bluetooth range Approximately 10 m

Collecting data

  1. Charge the device via USB. A green LED indicates sufficient battery. Disconnect from the power source prior to use.
  2. Connect the cable set to the device and place the electrodes on the body. Each channel records against a unipolar reference electrode. The order of the electrodes is shown below. Use the Velcro strap to secure the device to an EEG cap.
  3. Push the power button to start the device. It will now record data to internal memory, if present.
  4. Two blue blinks per second indicate that the device is visible via Bluetooth. The device’s Bluetooth name is Explore_XXXX. The last four digits on the device’s label are its Bluetooth ID.
  5. Once a Bluetooth connection to the host machine has been established (see Section: API), the Explore device will start transferring data via Bluetooth. Use Explore’s open-source APIs to access impedance values, visualize the signal stream, change device settings, and more.
  6. Press the device button once to set a mark during the recording. A pink LED signal indicates that a marker has been set.
  7. Turn off the device after use. To do so, hold the power button for three seconds until the LED blinks red three times. Always shut down the device before connecting it to USB.MENTALAB-Explore-Unlock-the-Brain-with-Cutting-Edge-Biosensor-FIG-4

Instructions

This table describes Explore’s LED light codes

MENTALAB-Explore-Unlock-the-Brain-with-Cutting-Edge-Biosensor-FIG-8

Connection

  • To pair your Explore device with a mobile or computer, use the standard Bluetooth menu. Explore uses a Serial Profile Protocol (SPP) to transfer raw data as soon as a Bluetooth connection is established.
  • If the connection is lost, the device will revert to Bluetooth-visible mode, which means it is ready to reconnect. Explore remains in this state for four minutes. After this, it moves to offline mode if the device has internal memory, or else shuts down.

Data
Explore samples ExG data at 250 Hz (default) with a 24-bit resolution. The device also records and transmits accelerometer, gyroscope, and magnetometer data. This means you can derive the absolute orientation of your device at all times. The device also communicates its temperature and battery voltage continuously.
Data are stored in a binary file (.BIN suffix) in flash memory. To retrieve data from the device, connect Explore to a computer via USB. Files cannot be deleted via USB, instead they must be overwritten. To format the memory (and delete all previous data), use our open-source APIs. Please refer to the user manual or website for more details.
Software
Capture and visualize data using Explore’s APIs written in Python, C++, Java, and MATLAB. Everything is open-source.
To contribute, please open a pull request at: https://github.com/Mentalab-Hub.

Explorepy, written in Python, is our most mature API. It provides an extensive set of tools that allow you to build customized biosignal applications. For detailed instructions on how to install and use explorepy, please visit: https://explorepy.readthedocs.io.

Explore Desktop is our newest software. It provides a graphical user interface to explorepy, allowing you to measure impedances, visualize data, push to LSL, and set event markers using graphical buttons, rather than a command line.

API diagram

MENTALAB-Explore-Unlock-the-Brain-with-Cutting-Edge-Biosensor-FIG-5

Contact

  • Mentalab is a biomedical technology company from Munich, Germany.
  • Mentalab Explore is a high-end, mobile measurement device for biosignal applications.
  • Mentalab Explore is used by researchers and scientists around the world in applications ranging from brain-computer interfaces to sleep and neuropsychology research.
  • Our team is always happy to support you in developing your own innovative solutions.

MORE INFORMATION

Documents / Resources

MENTALAB Explore Unlock the Brain with Cutting Edge Biosensor [pdf] User Guide
Explore, Explore Unlock the Brain with Cutting Edge Biosensor, Unlock the Brain with Cutting Edge Biosensor, Brain with Cutting Edge Biosensor, Cutting Edge Biosensor, Edge Biosensor, Biosensor

References

Leave a comment

Your email address will not be published. Required fields are marked *