vivio-logo

V I V O MOUNT-TVQR1 Quick Release TV Wall Mount

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-product

Product Information

Specifications

  • Product: Quick Release TV Wall Mount
  • SKU: MOUNT-TVQR1
  • Weight Capacity: 33lbs (15kg)

Product Usage Instructions

Assembly Options

  • OPTION 1: Quick Release
    Allows for quick installation and removal of TV. Quick Release Plate allows Mount Arm to slide on and off for easy storage in RV’s & homes. Compatible with wood or concrete walls.
    • Wood Wall Installation | pg 5-6
    • Concrete Wall Installation | pg 7-8
    • Note: Two wall plates are provided to allow for secondary installation location. TV can be moved from one location to the other.
  • OPTION 2: Standard Wall Mount
    The Mount Arm secures directly to the wall for residential use. Compatible with wood or concrete walls.
    • Wood Wall Installation | pg 9
    • Concrete Wall Installation | pg 10

Option 1a: Quick Release – Wood Wall Installation

  1. Hold Wall Plate (B) up to your desired mounting location and usethe built-in Bubble Level on plate to level. Use a pencil to mark holes. Remove Plate and drill 2.2″ (55mm) deep holes using a 3/16″ (4.5mm) drill bit.
    Second Mounting Location: Two Wall Plates are  provided to allow for a secondary installation location. The quick-release feature allows you to move the mount arm from one location to another. The second plate can be used on either a wood or concrete wall.
  2. Follow appropriate mounting steps.
    Secure Wall Plate (B) to a mounting location using ST6.3x50mm Screws (W-A) and a drill. Use of a level is highly recommended Slide Arm (A) into one of your installed Wall Plates (B), then secure using the M6x6mm Set Screws (S-C) and 3mm Allen Wrench (T-A).

CAUTION!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.DO NOT EXCEED WEIGHT CAPACITY TO DO SO MAY RESULT IN SERIOUS INJURY.
WARNING: DO NOT INSTALL INTO DRYWALL ALONE VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO MOUNT.
We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.com, email at help@vivo-us.com, or call us at 309-278-5303.

Package Contents

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (1)

Included Hardware & Tools

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (2)

Tools Needed

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (3)

Weight Capacity

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (4)

ASSEMBLY OPTIONS

OPTION 1:
Quick Release
Allows for quick installation and removal of TV. Quick Release Plate allows Mount Arm to slide on and off for easy storage in RV’s & homes. Compatible with wood or concrete walls. Wood Wall Installation | pg 5-6Concrete Wall Installation | pg 7-8
Note: Two wall plates are provided to allow for secondary installation location. TV can be moved from one location to the other.

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (5)OPTION 2:
Standard Wall Mount The Mount Arm secures directly to the wall for residential use. Compatible with wood or concrete walls. Wood Wall Installation | pg 9  Concrete Wall Installation | pg 10

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (6)

Option 1a Quick Release: Wood Wall Installation

Hold Wall Plate (B) up to your desired mounting location and use the buit-in Bubble Level on plate to level. Use a pencil to mark holes. Remove Plate and two drill 2.2” (55mm) deep holes using a 3/16” (4.5mm) drill bit.

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (7)

Second Mounting Location:
Two Wall Plates are provided to allow for a secondary installation location. The quick-release feature allows you to move the mount arm from one location to another. The second plate can be used on either a wood or concrete wall. Follow appropriate mounting steps

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (8)

Secure Wall Plate (B) to mounting location using ST6.3x50mm Screws (W-A) and a drill. Use of a level is highly recommended.

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (9)

Slide Arm (A) into one of your installed Wall Plates (B), then secure using the M6x6mm Set Screws (S-C) and 3mm Allen Wrench (T-A).

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (10)

Second Mounting Location: To use Arm in second mounting location, remove Set Screws and slide Arm out.

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (10)

Concrete Installation

Hold Wall Plate (B) up to your desired mounting location and use the built-in Bubble Level on plate to level. Use a pencil to mark holes. Remove Plate and drill two 2.4” (60mm) deep holes using a 3/8” (10mm) drill bit.

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (11)

Second Mounting Location:
Two Wall Plates are provided to allow for a secondary installation location. The quick-release feature allows you to move the mount arm from one location to another. The second plate can be used on either a wood or concrete wall. Follow appropriate mounting steps

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (12)

Press Concrete Anchors (W-B) into the drilled holes, then secure Wall Plate (B) using ST6.3x50mm Screws (W-A) and a drill. Use of a level is highly recommended.

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (13)

Slide Arm (A) into one of your installed Wall Plates (B), then secure using the M6x6mm Set Screws (S-C) and 3mm Allen Wrench (T-A).

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (14)

Second Mounting Location: To use Arm in second mounting location, remove Set Screws and slide Arm out.

Option 2a Standard Wall Mount: Wood Wall Installation

WOOD STUD INSTALLATION:
Hold Arm (A) up to your desired mounting location and mark the hole locations using a pencil. Use of a level is highly recommended. Drill 2.2” (55mm) deep holes using a 3/16” (4.5mm) drill bit.

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (15)

Secure Arm (A) to wall using ST6.3x50mm Screws (W-A) and a drill with a Phillips bit or 10mm socket. Use of a level is highly recommended.

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (16)

Option 2b Standard Wall Mount: Concrete Wall Installation

Hold Arm (A) up to your desired mounting location and mark the hole locations using a pencil. Use of a level is highly recommended. Drill 2.4” (60mm) deep holes using a ⅜” (10mm) drill bit.

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (17)

Press Concrete Anchors (W-B) into the drilled holes and attach Arm (A) to the wall using ST6.3x50mm Screws (W-A) and a drill with a Phillips bit or 10mm socket. Use of a level is highly recommended.

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (18)

ALL ASSEMBLIES TV Mounting Instructions

For 100x100mm or 75x75mm VESA Patterns: Extensions are not needed. Proceed to Step 2.
For 200×100 or 200×200 VESA Patterns: Based on your VESA pattern, assemble VESA Extension Set (D) to VESA Plate (C) following the appropriate image below. Secure using M5x10mm Screws (S-A), M5 Nuts (S-B), and a Phillips screwdriver.

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (19)

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (20)

Attach VESA Plate (C) onto your display using Screws (M-A through M-D) and Washers (M-E or M-F). Spacers (M-G) may be required depending on the display.

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (21)

Remove the Pre-Installed Knob and Washer on Arm (A). Slide VESA Plate (C) onto the Arm and reinstall the removed knob and washer. Once you have set your desired position of the arm, lock down the knobs using 5mm Allen Wrench (T-B).

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (22)

 

Remove the arm covers using a Phillips screwdriver and route cables through arm and reinstall covers.

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (23)

Adjust screen tilt and swivel using Adjustment Knobs and 5mm Allen Wrench (T-B).

V I V O MOUNT--TVQR1-Quick -Release-TV Wall -Mount-fig- (24)

WARNING
Always use Allen Wrench to tighten knobs and hold the mount when adjusting. DO NOT attempt to hand-tighten to adjust. Failure to follow these instructions may result in damage or accidental injury.

FAQ

Q: What should I do if I exceed the weight capacity of the wall mount?
A: It is crucial not to exceed the weight capacity specified for the wall mount as it may result in serious injury or damage. If you have a heavier TV, consider upgrading to a wall mount with a higher weight capacity.

Q: Can I install the wall mount into drywall?
A: It is recommended not to install the wall mount into drywall alone. Verify your wall construction and use wood studs for mounting. The wall mount includes hardware for brick and concrete walls. If unsure, contact us for assistance.

Documents / Resources

V I V O MOUNT-TVQR1 Quick Release TV Wall Mount [pdf] Instruction Manual
MOUNT-TVQR1 Quick Release TV Wall Mount, MOUNT-TVQR1, Quick Release TV Wall Mount, Release TV Wall Mount, TV Wall Mount, Wall Mount

References

Leave a comment

Your email address will not be published. Required fields are marked *