YITAHOME TLCFLS-2008 Chandelier Ceiling Fan with Remote Instruction Manual

TLCFLS-2008 Chandelier Ceiling Fan with Remote

“`html

Product Specifications

  • Brand: YITAHOME
  • Model: ZSWYHS-V1
  • Type: Ceiling Fan

Product Usage Instructions

Before You Start

Thank you for purchasing a YITAHOME product. To ensure correct
function and safety, please read and follow all the instructions
before using the product.

Safety Guidelines

  1. To avoid possible electric shock, turn off the electricity at
    the main fuse box or circuit panel before you begin installing or
    servicing the fan.
  2. Read and follow all instructions and safety guidelines
    carefully before installing.
  3. Make sure all electrical connections comply with the local
    codes or ordinances and the National Electrical Code. If you are
    unfamiliar with electric wiring, please consult a qualified and
    licensed electrician.
  4. Make sure there is sufficient space to rotate the blades of the
    fan, which is at least seven (7) feet of clearance.

Tools and Materials Required

  • External Hexagonal Wire Wrench
  • Stripper
  • Phillips Screwdriver
  • Step Ladder
  • Screwdriver
  • Clevis Pin

Installing the Fan

Tools Required: Phillips screwdriver, a pair of pliers, straight
slot screwdriver, adjustable wrench, step ladder, and wire
cutters.

Installing the Mounting Bracket

The ceiling fan must be installed in the location where there is
12(300mm) spacing from the tips of all blades to the nearest
objects or walls. Remember to turn off the power before hanging the
fan. Follow the instruction below to hang your fan properly:

  1. For concrete ceiling, drill two holes in the ceiling and secure
    the mounting bracket to the ceiling with two 0.32(8mm) expansion
    screws, flat washers nuts provided and tighten with a spanner.

FAQ

Q: What tools are required for installing the fan?

A: Tools required include a Phillips screwdriver, pliers,
straight slot screwdriver, adjustable wrench, step ladder, and wire
cutters.

Q: What are the safety precautions to consider before
installing the fan?

A: Safety precautions include turning off the electricity,
ensuring compliance with local codes, having sufficient clearance
for blade rotation, and consulting a licensed electrician if
unfamiliar with wiring.

Q: Can children use the fan unsupervised?

A: Children should be supervised to ensure they do not use
appliances as toys.

“`

Pure & Easy

ZSWYHS-V1

ASSEMBLY INSTRUCTIONS
TLCFLS-2008

CONTACT US:
If you have any questions about the installation of YITAHOME® productsjust contact us at +1(888)-717-8084 from Mon-Fri 8:00 AM-16:30 PM PST / Saturday 8:00 AM-12:00 PMPST or E-mail us at: after-sale.cs@hotmail.com
Alternative method to contact us(amazon.com orders only) 1.Log into your amazon account 2.Go to “Your Orders” and find the purchase 3.Click on “Contact Seller”

CEILING FAN

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

Thank you for purchasing a YITAHOME product. To ensure correct function and safety, please read and follow all the instructions before using the product.

BEFORE YOU START

SAFETY GUIDELINES
1.To avoid possible electric shock, turn off the electricity at the main fuse box or circuit panel before you begin installing or servicing the fan.
2.Read and follow all instructions and safety guidelines carefully before installing. 3.Make sure all electrical connections comply with the local codes or ordinances and the National
Electrical Code. If you are unfamiliar with electric wiring, please consult a qualified and licensed electrician. 4.Make sure there is sufficient space to rotate the blades of the fan, which is at least seven (7) feet of clearance
between the floor and the fan blade tips. The fan should be mounted at least thirty (30) inches from walls and/or other upright structures. 5.WARNING:The outlet box and ceiling support joist used must be securely mounted, and capable of supporting at least 100 pounds . To reduce the risk of fire, electric shock or personal injury, mount to the outlet box marked”acceptable for fan support”and use mounting screws provided with the outlet box. The box must be supported directly by the building structure. 6.WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support” and use mounting screws provided with the outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt. 7.Electrical diagrams are for reference only. Light kits that are not packed with the fan, which must be UL listed and marked suitable for use with the fan model you are installing . Switches must be UL. general-use switches. Refer to the instructions packaged with the light kits and switches for proper assembly. 8.After assembling, check that all connections are firmly secured. 9.After making electrical connections, spliced conductors should be turned upward and pushed up carefully into outlet box. The wires should be placed separately from the grounded conductor and the equipment-grounding conductor on opposite side of the outlet box. 10.WARNING:To reduce the risk of electrical shock and fire , do not use this fan with any solid-state fan speed control device, or rheostat. 11.Do not operate the reverse switch until the fan has come to a complete stop. 12.Do not insert anything into the fan blades while they are rotating. 13.WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as “flanges”) during assembly or after installation. Do not insert objects into the blades. 14.To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan. 15.Do not use water or detergent when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for cleaning.

Contact a licensed electrician if

you are not good at performing OFF

electrical work. It’s the licensed

OFF

electrician who installs the fan, if

required by the local code. Do not

use the fan with a dimmer switch.

Turn off power at breaker.

Product Instruction

Mounng Bracket ST5x35 Setscrew
Downrod

Blades

Canopy M4x14 Screws Hairclip Pin Fan Motor Assembly

Blade Bracket

Light Kit

NOTE: The important safety precautions and instructions on the manual are not meant to cover all possible conditions and situations that may occur. It should be understood that common sense and caution are necessary factors during the installation and operation of the fan.
NOTE: This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities that are different or impaired, or lack of experience and/or knowledge, unless such persons are supervised and/or trained to operate the appliance by a person responsible for their safety.
NOTE: Children should be supervised to ensure that they do not use appliances as a toy.

Glass shade

Tools and Materials Required

External Hexagonal Wire

Wrench

Stripper

Phillips

Step Ladder

Screwdrive

Clevis Pin

MED

LOW

LIGHT ON/OFF

HI

STOP

2H

1H

4H

8H

Remote control

1

2

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

Item no.
1
2

SCREWS BAG

Reference Image Qty.

Item no.

Reference Image

ST5x35 Setscrew

×4 6

Screw Washer

Expansion Screw

×2 7

Screw Spring Washer

INSTALLING THE FAN

Qty.

Tools Required: Phillips screwdriver, a pair of pliers, straight slot screwdriver, adjustable wrench, step ladder, and wire cutters.
INSTALLING THE MOUNTING BRACKET

×2

The ceiling fan must be installed in the location where there is 12″(300mm) spacing from the tips of all blades to the nearest objects or walls. REMEMBER to turn off the power before hanging the fan. Follow the instruction below to hang your fan properly:

1. For concrete ceiling, drill two holes in the ceiling and secure the mounting bracket to the ceiling with two 0.32″(8mm) (distance between the two holes should be appropriate) expansion screws, flat washers nuts provided and tighten with a spanner.

×2

3

×4 8

Setscrew Stopper

Balance Pack

×1

2. For wood ceiling, secure the mounting bracket to the ceiling that is capable of carrying a load of at least 100lbs (45kgs) with two long mounting screws and washers provided. Be sure at least 0.12″(30mm) of the screw is threaded into the support.

4

×3 9

×16

Wire Cap

Fabric Washer

3. For installing the outlet box, secure it directly to the building structure. Use appropriate fasteners and building materials. The outlet box and its support must be able to fully bear the moving weight of the fan (at least 100lbs). Use a UL listed metal outlet box instead of plastic ones. Figure 1& 2 show the examples of mounting the outlet box.

5

×2 10

×16

CEILING JOIST

PARALLEL WOOD BRACE (MIN.2″ THICK)

#8-32 Setscrew

Screws for Blades

CROSS BRACE

OUTLET BOX

OUTLET BOX

CELING JOIST

CEILING JOISTOR CROSS BRACE

3

4

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

4. Refer to the Fig. on the right to mount when the ceiling is angled (Max. 15°). NOTE: The hanger must be able to withstand 100lbs (45kg) or more after the installation.

INSTALLING THE DOWNROD
REMEMBER to turn off the power before hanging the fan. Follow the steps below to hang your fan properly. 1) Remove the hair clip pin”1″and clevis pin”2″on the fan motor’s downrod joint, then withdraw half of the screw
“3”that locks the downrod. 2) Loosen the screws”5″and”6″on the downrod and remove the lifting ball and safety pin”4″. 3) Pass the detached downrod through the wire and insert it into the downrod joint. Make sure that it is aligned with
the hole on the joint. Pass through clevis pin”2″and insert the hair clip”1″into the hole of clevis pin”2″, then lock the downrod with the screw”3″. 4) Pass the canopy through the downrod. 5) Pass the detached lifting ball through the downrod, then insert safety pin”4″to jam the lifting ball, and then use screws”5″and”6″to lock it.

2
2

1

3

13

15

INSTALLING THE BLADE

1)

1 )Attach blade brackets to blades using the blade bracket screws and metal or fabric washers.
2)Attach them to the blade assembly & tighten securely using the screws provided.

2)

3)

1)

2)

5

4)

INSTALLING THE FAN TO MOUNTING BRACKET ON CEILING

! WARNING: To avoid possible electrical shock, be sure the electricity is turned off in the main fuse box before wiring. Carefully lift the fan assembly onto mounting bracket and rotate the fan until the notch on downrod ball “1” engages the ridge on the mounting bracket “2”. This will allow for hands free wiring.

1 2

6

ASSEMBLY INSTRUCTIONS
MAKE THE ELECTRIC CONNECTIONS
! WARNING: To avoid possible electrical shock, be sure the electricity is turned off in the main fuse box before wiring.
1. Connect the fan to the remote control. The fan’s 4P plug should insert into the the remote control’s 4P plug.
2. Connect the remote control to the house’s power line, then connect the remote control’s white wire to the house’s white wire. Connect the remote control’s black wire to the house’s black wire, and connect all the fans’ green ground wires to the house of ground wires. Secure wires.
3. Connect the fan motor to the lamp: connect the fan motor’s 1P white wire to the lamp’s 1P white wire. Connect the fan motor’s 1P blue wire to the tool’s 1P blue wire.

ASSEMBLY INSTRUCTIONS
INSTALLING THE LIGHT KIT
1. Remove 3 mounting screws from the light kit; Find the Molex connector from the motor and the Molex connector from the light kit. Install it with 3 screws and tighten light kit.
2. Install crystal pendants and bulbs. 3. Finished.

to the FAN LIGHT

Motor

FOR LIGHT L

blue

FOR MOTOR/LIGHT N white

FOR MOTOR

black

green

3P
to the FAN MOTOR

3P

TO LIGHT L

blue

TO MOTOR/LIGHT N white

TO MOTOR

black

receiver of remote control

INSTALLING THE CANOPY
Loosen the 2 screws on the bottom of mounting bracket but do not remove them. Raise the canopy up and align the keyholes on the bottom of the canopy with the 2 screws on the bottom of mounting bracket. Rotate the canopy until both screws from the mounting bracket drop into the slot recesses. Tighten screws.
7

to AC Power

1

2

AC IN L brown ACIN N blue
green

AC L 120 Vac AC N SUPPLY
green

green

3

Installation is now finished. Turn on the power switch as Fig 7. Then the fan lights are on. Test and pair your fan immediately using the remote control.

8

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

OPERATING YOUR FAN
Turn on the power and check the fan’s operation. The appropriate speed settings of warm or cool weather depend on many factors such as the room size, ceiling height, and fans’ number. The slide switch controls the direction of the blades: forward (switch down) or reverse (switch up).

REMOTE CONTROL SETTING AND OPERATION
1. Restore electricity to the outlet box by turning the electricity on at the main fuse box.
2. Remove the battery cover from the remote control transmitter, install the battery, and replace the cover.
Note: 1). Use a 12V battery to replace original one. 2). If not used for a long period of time, remove the battery to prevent damage to the remote transmitter, and store the remote transmitter away from excess heat or humidity.
3. Remote control’s functions are as follows, including controlling transmitter, fan speed and light.

(SUMMER TIME)
(WINTER TIME)
! NOTE:Wait for the fan to stop before reversing the direction of the blade rotation
A. Warm weather-(Forward) A downward airflow creates a cooling effect. This allows you to set your air conditioner on a higher setting without affecting your comfort.
B. Cool weather-(Reverse) An upward airflow moves warm air off the ceiling.This allows you to set heating unit on a lower setting without affecting your comfort.
9

MED

LOW

LIGHT ON/OFF

HI

STOP

2H

1H

4H

8H

LIGHT ON/OFF
Fan Speed H-Highest speed M-Medium speed L-Lowest speed
FAN STOP
Timer
1H-Fan automatically turns off after 1 hour 2H-Fan automatically turns off after 2 hours 4H-Fan automatically turns off after 4 hours 8H-Fan automatically turns off after 8 hours

10

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

IMPORTANT:PAIRING BETWEEN REMOTE AND RECEIVER
Within the 30s after turning “ON” the power supply, press the “FAN ON/OFF” buttons of transmitters for 5s. Then the pairing is successfully activated and all functions will work normally.
IMPORTANT NOTES
The first step of pairing must be performed within 30s after turning on the power supply. 1.(a)When pairing multiple fans, please ensure the isolation switch or the power supply to
the first installed fan is turned off prior to pairing further fans. Please pair one fan at a time. (b)Please ensure the isolation switch is kept “ON”. The isolation switch can not act as a light switch as this will impair the remote receiver. 2.When the transmitter’s functions are disabled, please check the battery orientation and power level. Low battery voltage will affect your transmitter’s functions and your fan’s operation.Other remote controls nearby using the same frequency may interfere with your fan’s receiver. 3.Please remove batteries from the transmitter if not used for a long period of time. 4.Remote supports 200w maximum lighting.
IMPORTANT REMINDERS
1.Note: Receiver must be correctly installed on the fan’s mounting bracket. 2.When the transmitter cannot control the receiver, please check the battery level. 3.When the transmitter cannot control the receiver, please check if similar remote controls
your fan nearby and interferes with each other. 4.Battery’s low power will affect the transmitter’s sensitivity and the signal reception
accordingly. You must replace the battery if its power is low. 5.Please take the battery out of the transmitter to avoid battery leaks when not used for a
long time. 6.Isolation switch must be connected in the line. 7.When a blackout or otherwise circumstances happen, the light will work normally after
the power restores.
Please make sure that the fan is powered off before cleaning or maintaining. LED lights are not removable or replaceable, they can only be used with the product.

! WARNING: TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE ARM WHILE INSTALLING, BALANCING THE BLADES, OR CLEANING THE FAN. DO NOT INSERT OBJECTS BETWEEN ROTATING FAN BLADES.
NOISE: This is normal to hear occasional small noises, when it is quiet (especially at night). Because slight power fluctuations and frequency signals superimposed in the electricity for off-peak hot water control may change fan motor noise. Please allow a 24-hour “breaking-in” period, most noises of a
Maintenance and Cleaning
1.Check the support connections, brackets, and airfoil attachments twice a year to ensure they are secure, because some connections may loose over time. It is not necessary to remove the fan from the ceiling.
2.Clean your fan periodically. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to minimize discoloration or tarnishing.
3.(Optional) Apply a light coat of furniture polish to the wood blades. 4.(Optional) Cover small scratches with a light application of shoe polish.
Do Not
1.Don’t use water to clean. Water may damage the motor and the wood, or even possibly cause an electrical shock.
2.Don’t apply oil to your fan or motor, as the motor has permanently lubricated sealed ball bearings. Note: Power off the fan before maintaining or cleaning the fan.

11

12

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

HOW TO USE BALANCING KITS
NOTE: CEILING FANS TEND TO MOVE DURING OPERATION DUE TO THE FACT THAT THEY ARE MOUNTED ON A RUBBER CROMMET. IF THE FAN WAS MOUNTED RIGIDLY TO THE CEILING, IT WOULD CAUSE EXCESS VIBRATION, MOVEMENT OF A FEW CENTIMETERS IS QUITE ACCEPTABLE AND DOES NOT SUGGEST ANY PROBLEMS
TO REDUCE FAN WOBBLE: PLEASE CHECK THAT ALL SCREWS WHICH SECURE THE MOUNTING BRACKET AND DOWNROD ARE SECURE
BALANCING A WOBBLING CEILING FAN For your convenience, a balancing kit is included: please follow this procedure when balancing the fan: 1.Check that all blades and blade arm screws are secure. 2.Most fan wobbling problems result from blade levels are unequal. Check this level by selecting a
point on the ceiling above one fan blade’s tip. Measure this distance. Rotate the fan until the next blade is positioned for measurement. Repeat for each blade. The distance deviation should be equal within 1/8″ (0.32cm). 3.Use the enclosed blade balancing kit if the blade wobbling is still noticeable. 4.If the blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute the weight and possibly result in smooth operation.
! WARNING: TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE ARM WHILE INSTALLING, BALANCING THE BLADES, OR CLEANING THE FAN. DO NOT INSERT OBJECTS BETWEEN ROTATING FAN BLADES
NOISE It’s normal to hear small occasional noises when in quiet night or days. Please allow a 24-hour “breaking-in” period, most noises of a new fan disappear during the time.

TROUBLESHOOTING
Your fan may occasionally jerk forward or backward upon starting up. This is normal and does not affect the fan operation. Try these troubleshooting steps before contacting customer service.

SYMPTOM

POSSIBLE SOLUTIONS

The fan doesn’t spin
The fan’s light does not work

1. Make sure the fan is getting power. 2. Check the functionality of circuit breaker or fuse panel and wall switch. 3. Confirm fan wires are correctly connected to the house wires. 4. Make sure the blocker of the fan motor is removed. 5. Use your remote to check the power to the breaker and try to work your ceiling fan
manually from afar (Normal switch only for the fan power on/off)
Make sure the LED light kit and light bulb are connected well.

The fan is noisy and wobbling

1.Confirm the blade screws are NOT rubbing against the the motor’s round plastic part. 2.Confirm the pin wire are NOT connected against the moving part. 3. Confirm the coupling cover is NOT hitting the motor 4. Confirm the down rod is NOT slanted 5. Tighten any loose screws on the light kit, fan blades, motor coupling, down rod,
brackets and mounting hardware. 6. Confirm the hanger ball is firmly seated in the mounting bracket. 7. The ceiling beam must meet the minimum tensile test strength of 30KG for installation. 8. Make sure the airfoils and brackets are NOT bent or deformed. 9. Confirm the wire connections are not rattling against each other. 10. Confirm the fan blades are not cracked. If the fan blades are cracked, replace the
damaged blades with the set of new blades of same brand as your ceiling fan ensures the compatibility. 11. Change fan blades’ positions. 12. Confirm the light kit is NOT slanting and hitting the motor. 13. Confirm all the blades are screwed firmly into blade holders.

The fan or light automatically turns on/off

1.Confirm the circuit breaker is not malfunctioning. 2.Confirm the wire connections are not frayed. 3. Confirm the app does not set the timer or schedule 4. Power off the fan for 10 minutes, then power on again.

13

14

Documents / Resources

YITAHOME TLCFLS-2008 Chandelier Ceiling Fan with Remote [pdf] Instruction Manual
TLCFLS-2008, ZSWYHS-V1, TLCFLS-2008 Chandelier Ceiling Fan with Remote, Chandelier Ceiling Fan with Remote, Ceiling Fan with Remote, Fan with Remote

References

Leave a comment

Your email address will not be published. Required fields are marked *